<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-15" http-equiv="Content-Type"> </head> <body bgcolor="#ffffff" text="#000000"> Martin Papadopoulos schrieb: <blockquote cite="mid:465745AB.30400@martin-papadopoulos.de" type="cite"> <pre wrap="">eric magaoay schrieb: </pre> <blockquote type="cite"> <pre wrap="">Martin, I have been using PXE boot/install F7 development builds without a problem (mostly x86_64, but sometimes i386 -build tree). Make sure your config setup in dhcpd.conf and config file(s) under pxelinux.cfg directory is correct. Try using the boot kernel/initrd located in: /isolinux/vmlinuz /isolinux/initrd.img eric Martin Papadopoulos wrote: </pre> <blockquote type="cite"> <pre wrap="">hello, since the early dev phases of f7 , no single vmlinuz version is bootable via pxe. boot the pxe vmlinuz provided always leeds to "invalid or corrupt kernel image" it's really bugging since nowadays pxe and kickstart are common infrastructure methods for deployment :-( greetz martin papadopoulos </pre> </blockquote> </blockquote> <pre wrap="">pooh. je*** ch*** , i had a type in the pxelinux.cfg and misinterpreted the pxelinux message. sorry guys. works fine now. thanx a lot. have a nice we greetz martin papadopoulos :-) </pre> </blockquote> another problem with pxe and f7 rc2 i tested under vmware with scsi disk as hard drive ( not ide ) and anaconda says it can't find any disks. maybe the scsi driver is missing in vmlinuz or in the initrd ? greetz martin papadopoulos </body> </html>