Linux version 2.6.23-0.104.rc3.fc8 (kojibuilder@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070723 (Red Hat 4.1.2-17)) #1 SMP Mon Aug 13 17:03:04 EDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000fbfd0000 (usable) BIOS-e820: 00000000fbfd0000 - 00000000fbfff000 (ACPI data) BIOS-e820: 00000000fbfff000 - 00000000fc000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 3135MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 1032144) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 1032144 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 1032144 On node 0 totalpages: 1032144 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4040 pages, LIFO batch:0 Normal zone: 3080 pages used for memmap Normal zone: 222200 pages, LIFO batch:31 HighMem zone: 10975 pages used for memmap HighMem zone: 791793 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.3 present. Using APIC driver default ACPI: RSDP 000FF980, 0014 (r0 AMI ) ACPI: RSDT FBFF0000, 002C (r1 RCC RCCNILE 1 MSFT 1000000) ACPI: FACP FBFF0030, 0074 (r1 RCC RCCNILE 1 MSFT 1000000) ACPI: DSDT FBFF0120, 5564 (r1 RCC CNB30LE 100 MSFT 100000B) ACPI: FACS FBFFF000, 0040 ACPI: APIC FBFF00B0, 006A (r1 RCC RCCNILE 1 MSFT 1000000) ACPI: PM-Timer IO Port: 0x508 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:8 APIC version 17 ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: CNB30LE APIC at: 0xFEE00000 I/O APIC #4 Version 17 at 0xFEC00000. I/O APIC #5 Version 17 at 0xFEC01000. Enabling APIC mode: Flat. Using 2 I/O APICs Processors: 2 Allocating PCI resources starting at fc400000 (gap: fc000000:02c00000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 1018033 Kernel command line: ro root=/dev/VolGroup00/root console=ttyS0,19200 audit=0 pci=noacpi clocksource=acpi_pm audit: disabled (after initialization) mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) mapped IOAPIC to ffff9000 (fec01000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c080b000 soft=c07eb000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1097.243 MHz processor. Console: colour VGA+ 80x25 console [ttyS0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1024 kB per task-struct memory footprint: 1680 bytes Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 4058552k/4128576k available (2250k kernel code, 68760k reserved, 1160k data, 568k init, 3211072k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc075a000 - 0xc07e8000 ( 568 kB) .data : 0xc063282e - 0xc0754a44 (1160 kB) .text : 0xc0400000 - 0xc063282e (2250 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 2196.69 BogoMIPS (lpj=1098346) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. lockdep: not fixing up alternatives. ACPI: Core revision 20070126 ACPI Warning (dswload-0698): Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) [20070126] ACPI Warning (dswload-0698): Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) [20070126] ACPI Warning (dswload-0698): Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) [20070126] ACPI Warning (dswload-0698): Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) [20070126] ACPI Warning (dswload-0698): Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope) [20070126] ACPI Warning (dswload-0698): Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) [20070126] ACPI Warning (dswload-0698): Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope) [20070126] ACPI Warning (dswload-0698): Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope) [20070126] ACPI Warning (dswload-0698): Type override - [OSB4] had invalid type (String) for Scope operator, changed to (Scope) [20070126] ACPI Warning (dswload-0698): Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) [20070126] ACPI Warning (dswload-0698): Type override - [WAKE] had invalid type (Integer) for Scope operator, changed to (Scope) [20070126] ACPI Warning (dswload-0698): Type override - [RUNT] had invalid type (Integer) for Scope operator, changed to (Scope) [20070126] ACPI Warning (dswload-0698): Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope) [20070126] ACPI Warning (dswload-0698): Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope) [20070126] CPU0: Intel Pentium III (Coppermine) stepping 0a lockdep: not fixing up alternatives. Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c080c000 soft=c07ec000 Initializing CPU#1 Calibrating delay using timer specific routine.. 2193.88 BogoMIPS (lpj=1096942) CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 0a Total of 2 processors activated (4390.57 BogoMIPS). ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=56 bytes sizeof(inode)=604 bytes sizeof(dentry)=160 bytes sizeof(ext3inode)=856 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=180 bytes sizeof(task_struct)=3376 bytes khelper used greatest stack depth: 3160 bytes left khelper used greatest stack depth: 3084 bytes left Booting paravirtualized kernel on bare hardware Time: 9:28:32 Date: 07/15/107 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfda65, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources khelper used greatest stack depth: 2956 bytes left ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1) ACPI: Using PIC for interrupt routing khelper used greatest stack depth: 2792 bytes left Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) * The chipset may have PM-Timer Bug. Due to workarounds for a bug, * this clock source is slow. If you are sure your timer does not have * this bug, please use "acpi_pm_good" to disable the workaround * The chipset may have PM-Timer Bug. Due to workarounds for a bug, * this clock source is slow. If you are sure your timer does not have * this bug, please use "acpi_pm_good" to disable the workaround PCI: Discovered peer bus 01 PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 23 PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:0f.2[A] -> IRQ 10 PCI->APIC IRQ transform: 0000:01:04.0[A] -> IRQ 24 PCI->APIC IRQ transform: 0000:01:04.1[B] -> IRQ 25 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Time: tsc clocksource has been installed. pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:00: iomem range 0x100000-0xfbffffff could not be reserved pnp: 00:00: iomem range 0xfff80000-0xffffffff could not be reserved pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:02: ioport range 0x40b-0x40b has been reserved pnp: 00:02: ioport range 0x4d6-0x4d6 has been reserved pnp: 00:02: ioport range 0xc14-0xc14 has been reserved pnp: 00:02: ioport range 0xc49-0xc49 has been reserved pnp: 00:02: ioport range 0xc52-0xc52 has been reserved pnp: 00:02: ioport range 0xc6c-0xc6c has been reserved NET: Registered protocol family 2 Time: acpi_pm clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 65536 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3750k freed apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1187170109.869:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 42CD8DF3F52729F5 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:04.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: duty_cycle spans bit 4 ACPI: duty_cycle spans bit 4 cpuidle: driver acpi_idle failed to attach to cpu 1 cpuidle: driver acpi_idle failed to attach to cpu 0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Generic RTC Driver v1.07 Non-volatile memory driver v1.2 Linux agpgart interface v0.102 agpgart: unable to determine aperture size. agpgart: agp_backend_initialize() failed. agpgart-serverworks: probe of 0000:00:00.0 failed with error -22 agpgart: unable to determine aperture size. agpgart: agp_backend_initialize() failed. agpgart-serverworks: probe of 0000:00:00.1 failed with error -22 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice khelper used greatest stack depth: 2744 bytes left cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 3:19:475 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 568k freed Write protecting the kernel read-only data: 861k USB Universal Host Controller Interface driver v3.0 insmod used greatest stack depth: 2432 bytes left ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:0f.2: OHCI Host Controller ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:0f.2: irq 10, io mem 0xfeafc000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected insmod used greatest stack depth: 1888 bytes left md: raid1 personality registered for level 1 xor: automatically using best checksumming function: pIII_sse pIII_sse : 2192.000 MB/sec xor: using function: pIII_sse (2192.000 MB/sec) async_tx: api initialized (async) raid6: int32x1 312 MB/s raid6: int32x2 328 MB/s raid6: int32x4 332 MB/s raid6: int32x8 324 MB/s raid6: mmxx1 992 MB/s raid6: mmxx2 1234 MB/s raid6: sse1x1 898 MB/s raid6: sse1x2 1226 MB/s raid6: using algorithm sse1x2 (1226 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 SCSI subsystem initialized scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs scsi 1:0:0:0: Direct-Access FUJITSU MAP3735NC 0108 PQ: 0 ANSI: 3 scsi1:A:0:0: Tagged Queuing enabled. Depth 4 target1:0:0: Beginning Domain Validation libata version 2.21 loaded. target1:0:0: wide asynchronous target1:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) scsi2 : pata_serverworks scsi3 : pata_serverworks ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14 target1:0:0: Ending Domain Validation scsi 1:0:1:0: Direct-Access FUJITSU MAP3735NC 5207 PQ: 0 ANSI: 3 scsi1:A:1:0: Tagged Queuing enabled. Depth 4 target1:0:1: Beginning Domain Validation target1:0:1: wide asynchronous target1:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127) target1:0:1: Ending Domain Validation ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 scsi 1:0:6:0: Processor ESG-SHV SCA HSBP M14 0.01 PQ: 0 ANSI: 2 target1:0:6: Beginning Domain Validation target1:0:6: Ending Domain Validation device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com scsi: waiting for bus probes to complete ... sd 1:0:0:0: [sda] 143571316 512-byte hardware sectors (73509 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: b3 00 00 08 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] 143571316 512-byte hardware sectors (73509 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: b3 00 00 08 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 1:0:0:0: [sda] Attached SCSI disk sd 1:0:1:0: [sdb] 143571316 512-byte hardware sectors (73509 MB) sd 1:0:1:0: [sdb] Write Protect is off sd 1:0:1:0: [sdb] Mode Sense: b9 00 00 08 sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:1:0: [sdb] 143571316 512-byte hardware sectors (73509 MB) sd 1:0:1:0: [sdb] Write Protect is off sd 1:0:1:0: [sdb] Mode Sense: b9 00 00 08 sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sd 1:0:1:0: [sdb] Attached SCSI disk scsi_scan_1 used greatest stack depth: 1536 bytes left md: md1 stopped. md: bind md: bind raid1: raid set md1 active with 2 out of 2 mirrors kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1187170151.284:2): selinux=0 auid=4294967295 awk used greatest stack depth: 1500 bytes left sd 1:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:1:0: Attached scsi generic sg1 type 0 scsi 1:0:6:0: Attached scsi generic sg2 type 3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Sleep Button (FF) as /class/input/input2 ACPI: Sleep Button (FF) [SLPF] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100: eth0: e100_probe: addr 0xfeafe000, irq 17, MAC addr 00:02:B3:87:25:EA piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device e100: eth1: e100_probe: addr 0xfeafd000, irq 16, MAC addr 00:02:B3:87:25:EB rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k No dock devices found. md: md0 stopped. md: bind md: bind raid1: raid set md0 active with 2 out of 2 mirrors device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-10, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-11, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-12, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-13, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1028152k swap on /dev/sdb3. Priority:-1 extents:1 across:1028152k Adding 1028152k swap on /dev/sda3. Priority:-2 extents:1 across:1028152k rc.sysinit used greatest stack depth: 1212 bytes left IA-32 Microcode Update Driver: v1.14a NET: Registered protocol family 10 lo: Disabled Privacy Extensions Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007) bonding: MII link monitoring set to 100 ms ADDRCONF(NETDEV_UP): bond0: link is not ready bonding: bond0: Adding slave eth0. e100: eth0: e100_watchdog: link up, 100Mbps, half-duplex bonding: bond0: making interface eth0 the new active one. bonding: bond0: enslaving eth0 as an active interface with an up link. ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready ================================= [ INFO: inconsistent lock state ] 2.6.23-0.104.rc3.fc8 #1 --------------------------------- inconsistent {softirq-on-W} -> {in-softirq-W} usage. events/0/9 [HC0[0]:SC1[2]:HE1:SE0] takes: (&(bond_info->tx_hashtbl_lock)){-+..}, at: [] bond_alb_xmit+0x26a/0x42c [bonding] {softirq-on-W} state was registered at: [] __lock_acquire+0x4ff/0xc67 [] lock_acquire+0x7b/0x9e [] _spin_lock+0x2e/0x58 [] bond_alb_initialize+0x64/0x18e [bonding] [] bond_open+0x33/0x175 [bonding] [] dev_open+0x31/0x6c [] dev_change_flags+0xa3/0x156 [] devinet_ioctl+0x207/0x50e [] inet_ioctl+0x86/0xa4 [] sock_ioctl+0x1ac/0x1c9 [] do_ioctl+0x22/0x68 [] vfs_ioctl+0x249/0x25c [] sys_ioctl+0x49/0x64 [] syscall_call+0x7/0xb [] 0xffffffff irq event stamp: 266326 hardirqs last enabled at (266326): [] local_bh_enable_ip+0xf3/0x106 hardirqs last disabled at (266325): [] local_bh_enable_ip+0x7a/0x106 softirqs last enabled at (266306): [] rt_run_flush+0x6e/0x97 softirqs last disabled at (266309): [] do_softirq+0x74/0xf7 other info that might help us debug this: 3 locks held by events/0/9: #0: (rtnl_mutex){--..}, at: [] mutex_lock+0x21/0x24 #1: (&bond->lock){-.-+}, at: [] bond_alb_xmit+0x38/0x42c [bonding] #2: (&bond->curr_slave_lock){..-+}, at: [] bond_alb_xmit+0x40/0x42c [bonding] stack backtrace: [] show_trace_log_lvl+0x1a/0x2f [] show_trace+0x12/0x14 [] dump_stack+0x16/0x18 [] print_usage_bug+0x141/0x14b [] mark_lock+0x12f/0x472 [] __lock_acquire+0x487/0xc67 [] lock_acquire+0x7b/0x9e [] _spin_lock+0x2e/0x58 [] bond_alb_xmit+0x26a/0x42c [bonding] [] dev_hard_start_xmit+0x21c/0x27a [] dev_queue_xmit+0x1f7/0x2aa [] mld_sendpack+0x210/0x35a [ipv6] [] mld_ifc_timer_expire+0x1e9/0x211 [ipv6] [] run_timer_softirq+0x127/0x18f [] __do_softirq+0x78/0xff [] do_softirq+0x74/0xf7 [] irq_exit+0x44/0x46 [] smp_apic_timer_interrupt+0x74/0x81 [] apic_timer_interrupt+0x33/0x38 [] _spin_unlock_bh+0x25/0x28 [] rt_run_flush+0x6e/0x97 [] rt_cache_flush+0x7c/0xaf [] fib_netdev_event+0x62/0x68 [] notifier_call_chain+0x2b/0x4a [] __raw_notifier_call_chain+0x19/0x1e [] raw_notifier_call_chain+0x1a/0x1c [] netdev_state_change+0x20/0x31 [] __linkwatch_run_queue+0x159/0x183 [] linkwatch_event+0x20/0x27 [] run_workqueue+0x7d/0x129 [] worker_thread+0xbb/0xc8 [] kthread+0x3b/0x64 [] kernel_thread_helper+0x7/0x10 ======================= bonding: bond0: Adding slave eth1. e100: eth1: e100_watchdog: link up, 100Mbps, half-duplex bonding: bond0: enslaving eth1 as an active interface with an up link. audit(1187170179.728:3): audit_pid=1885 old=0 by auid=4294967295 bond0: no IPv6 routers present Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period mount.nfs4 used greatest stack depth: 716 bytes left automount used greatest stack depth: 672 bytes left