<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> </head> <body bgcolor="#ffffff" text="#000000"> Mark Bidewell wrote: <blockquote cite="midbfdeacfa0805081703j5d7b5097paa08d76e0d295b6@mail.gmail.com" type="cite"> <blockquote type="cite"> <pre wrap="">I'm still stuck with this guest networking problem. I have br0 defined on the host with a static IP on the lan. I have eth0 on the host that points to the bridge br0. When I created the vm I selected shared network br0(eth0). In the guest I have ifcfg-eth0 that has: BOOTPROTO=dhcp. But when you do ifup eth0 it just sits there trying to determine IP and eventually it pings 192.168.122.1 which to me looks like it thinks its in a NAT environment rather than bridged networking. Regards, Gerry </pre> </blockquote> <pre wrap=""> have you looked here? <a class="moz-txt-link-freetext" href="http://kvm.qumranet.com/kvmwiki/Networking">http://kvm.qumranet.com/kvmwiki/Networking</a> Mark Bidewell </pre> </blockquote> <tt>Yes, but that is for doing everything from the command line. I was expecting that virt-manager was setting all that up. I mean I see vnet0 and vnet1 for my VM's on the host. This has all been created by virt-manager and virsh define. I didn't set any of that up manually except for setting up the host bridge br0. So how much of this networking setup is virt-manager actually doing if not all of it? The picture with virt-manager and networking is not exactly clear. Regards, Gerry </tt> </body> </html>