Initializing cgroup subsys cpuset Linux version 2.6.24.7-92.fc8 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Wed May 7 16:50:09 EDT 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e9800 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000020000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) 0MB HIGHMEM available. 512MB LOWMEM available. found SMP MP-table at 000f6930 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 131072) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 131072 HighMem 131072 -> 131072 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 131072 On node 0 totalpages: 131072 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 992 pages used for memmap Normal zone: 125984 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap DMI not present or invalid. Using APIC driver default ACPI: no DMI BIOS year, acpi=force is required to enable ACPI ACPI: Disabling ACPI support Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: FSCD1031 Product ID: PRIMERGY APIC at: 0xFEE00000 Processor #1 6:7 APIC version 17 Processor #0 6:7 APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000 swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ea000 swsusp: Registered nosave memory region: 00000000000ea000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07bb000 soft=c079b000 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 496.044 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 510868k/524288k available (2238k kernel code, 12760k reserved, 1131k data, 288k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) .init : 0xc0750000 - 0xc0798000 ( 288 kB) .data : 0xc062fa15 - 0xc074a724 (1131 kB) .text : 0xc0400000 - 0xc062fa15 (2238 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 993.02 BogoMIPS (lpj=496511) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU serial number disabled. CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code CPU0: Intel Pentium III (Katmai) stepping 03 SMP alternatives: switching to SMP code Booting processor 1/0 eip 3000 CPU 1 irqstacks, hard=c07bc000 soft=c079c000 Initializing CPU#1 Calibrating delay using timer specific routine.. 991.96 BogoMIPS (lpj=495983) CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU serial number disabled. CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Katmai) stepping 03 Total of 2 processors activated (1984.98 BogoMIPS). ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=1680 bytes CPU0 attaching sched-domain: domain 0: span 00000003 groups: 00000001 00000002 CPU1 attaching sched-domain: domain 0: span 00000003 groups: 00000002 00000001 net_namespace: 64 bytes Booting paravirtualized kernel on bare hardware Time: 17:00:15 Date: 05/21/08 NET: Registered protocol family 16 ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread DF820000 could not acquire Mutex [1] [20070126] No dock devices found. PCI: PCI BIOS revision 2.10 entry at 0xfd8ea, last bus=3 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources PCI quirk: region f0c0-f0ff claimed by PIIX4 ACPI PCI quirk: region f0b0-f0bf claimed by PIIX4 SMB PCI: Using IRQ router default [110a/0015] at 0000:00:02.0 PCI: Cannot allocate resource region 0 of device 0000:00:02.0 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:09.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: 2000-2fff MEM window: f4200000-f43fffff PREFETCH window: f4400000-f7ffffff NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3661k freed apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1211389216.811:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 30F2BA378A37FED9 - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:02:00.0 PCI: Firmware left 0000:02:0a.0 e100 interrupts enabled, disabling pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 agpgart: Detected an Intel 440GX Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 8:336:37 Freeing unused kernel memory: 288k freed Write protecting the kernel read-only data: 894k ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 5, io base 0x00001400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com input: PS/2 Generic Mouse as /class/input/input2 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods sym0: <895> rev 0x1 at pci 0000:02:01.0 irq 9 sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: SCSI BUS has been reset. scsi0 : sym-2.2.3 DAC960: ***** DAC960 RAID Driver Version 2.5.49 of 21 Aug 2007 ***** DAC960: Copyright 1998-2001 by Leonard N. Zubkoff DAC960#0: Configuring Mylex DAC960PRL PCI RAID Controller DAC960#0: Firmware Version: 4.07-0-29, Channels: 1, Memory Size: 4MB DAC960#0: PCI Bus: 2, Device: 9, Function: 1, I/O Address: Unassigned DAC960#0: PCI Address: 0xF4400000 mapped at 0xE0878000, IRQ Channel: 11 DAC960#0: Controller Queue Depth: 124, Maximum Blocks per Command: 128 DAC960#0: Driver Queue Depth: 123, Scatter/Gather Limit: 33 of 33 Segments DAC960#0: Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 DAC960#0: Physical Devices: DAC960#0: 0:0 Vendor: SEAGATE Model: ST39175LC Revision: 0359 DAC960#0: Serial Number: 3AL1D3WF00007052LMMW DAC960#0: Disk Status: Online, 17782784 blocks DAC960#0: 0:1 Vendor: SEAGATE Model: ST39175LC Revision: 0359 DAC960#0: Serial Number: 3AL12G8600007022HWK2 DAC960#0: Disk Status: Online, 17782784 blocks DAC960#0: 0:2 Vendor: SEAGATE Model: ST39175LC Revision: 0359 DAC960#0: Serial Number: 3AL1DA6D00007052LPHY DAC960#0: Disk Status: Online, 17782784 blocks DAC960#0: 0:3 Vendor: SEAGATE Model: ST39175LC Revision: 0359 DAC960#0: Serial Number: 3AL1D9YN00007101D44R DAC960#0: Disk Status: Online, 17782784 blocks DAC960#0: Logical Drives: DAC960#0: /dev/rd/c0d0: RAID-1, Online, 35565568 blocks, Write Thru rd/c0d0: p1 p2 libata version 3.00 loaded. ata_piix 0000:00:07.1: version 2.12 scsi1 : ata_piix scsi2 : ata_piix ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1800 irq 14 ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1808 irq 15 ata2: port disabled. ignoring. scsi 0:0:5:0: CD-ROM NEC CD-ROM DRIVE:466 1.17 PQ: 0 ANSI: 2 target0:0:5: Beginning Domain Validation target0:0:5: asynchronous target0:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) target0:0:5: Domain Validation skipping write tests target0:0:5: Ending Domain Validation scsi 0:0:6:0: CD-ROM NEC CD-ROM DRIVE:466 1.17 PQ: 0 ANSI: 2 target0:0:6: Beginning Domain Validation target0:0:6: asynchronous target0:0:6: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) target0:0:6: Domain Validation skipping write tests target0:0:6: Ending Domain Validation scsi: waiting for bus probes to complete ... kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1211389240.052:2): enforcing=1 old_enforcing=0 auid=4294967295 SELinux:8192 avtab hash slots allocated.Num of rules:219453 SELinux:8192 avtab hash slots allocated.Num of rules:219453 security: 8 users, 12 roles, 2390 types, 115 bools, 1 sens, 1024 cats security: 67 classes, 219453 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: policy loaded with handle_unknown=allow audit(1211389240.998:3): policy loaded auid=4294967295 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:5:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 17x/40x cd/rw xa/form2 cdda tray sr 0:0:6:0: Attached scsi CD-ROM sr1 sr 0:0:5:0: Attached scsi generic sg0 type 5 sr 0:0:6:0: Attached scsi generic sg1 type 5 input: PC Speaker as /class/input/input3 piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100: eth0: e100_probe: addr 0xf4302000, irq 15, MAC addr 00:90:27:fd:34:69 SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions device-mapper: multipath: version 1.0.5 loaded loop: module loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on rd/c0d0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev rd/c0d0p1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 1048568k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:1048568k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14a warning: process `kudzu' used the deprecated sysctl system call with 1.23. ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (8192 buckets, 32768 max) ip_tables: (C) 2000-2006 Netfilter Core Team ADDRCONF(NETDEV_UP): eth0: link is not ready audit(1211389281.665:4): audit_pid=1739 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts fuse init (API version 7.9) SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present