[Fedora-ia64-list] rawhide install status on HP Integrity for rawhide-20060803
Doug Chapman
dchapman at redhat.com
Fri Aug 4 16:54:53 UTC 2006
Starting with around the 20060803 build things are looking very good on
the installer side for HP Integrity. I imagine other ia64 platforms
should be happier now as well.
The only issue I am still seeing is BZ 195259 where firstboot runs in X
GUI mode after a VNC install even on my headless systems. I am told
that this will be fixed as part of a redesign in this area.
I have attached the full list of recent known issues.
tree: rawhide-20060803
kernel: 2.6.17-1.2510.fc6
anaconda: anaconda-11.1.0.77-1
installation interfaces used:
kickstart PASSED
serial console / text PASSED
VNC PASSED
X window GUI UNTESTED
boot methods:
pxe PASSED
boot.iso PASSED
DVD PASSED
install media used:
NFS mount of a full tree PASSED
DVD PASSED
NFS mount of .iso images UNTESTED
CD UNTESTED
Systems successfully installed on:
rx2600 1CPU
rx2600 2CPU
rx2620 2CPU
rx4600 4CPU
rx8640 6CPU (montecito)
superdome 64CPU (still in progress but booted cleanly)
-------------- next part --------------
--------------------- New issues -----------------------
----------------------- existing issues -----------------------------
195259 ? after doing a VNC install firstboot improperly runs in graphical mode
Workaround: if you have networking enabled you can log in to the system and
touch /etc/sysconfig/firstboot and reboot. This will prevent firstboot from
running the next time.
Status: still broken in rawhide-20060726
------------------------------ resolved issues ---------------------------
200758 ? anaconda VNC install fails: _X11TransSocketINETConnect() can't get
address for localhost:6007
Workaround: cannot use VNC
Status: fix verified in rawhide-20060803
200755 ? anaconda dies with: AttributeError: XSetup instance has no attribute
'xhwstate'
Workaround: only happens with kickstart installs
Status: fix verified in rawhide-20060803
195203 ? anaconda has trouble finding kickstart file
Workaround: when using ks= boot option you must specify the full path
including the name of the kickstart file itself (where you should just
need the path).
Status: still broken as of rawhide-20060802
200582 ? NFS install doesn't work
Workaround: DNS issue, specify the NFS server via ip address instead of by
name.
Status: working as of rawhide-20060801
196701 ? anaconda segv when specifying static ip
Workaround: in the stage1 of anaconda use dhcp instead of specifying the ip
info manually.
Status: verified in rawhide-20060731
197804 ? anaconda dies with: double free or corruption (fasttop): 0x600000000012ec40
Workaround: no known workaround but does not happen on all systems. Might
be related to getting incomplete info from dhcp server so potential workaround
would be to use hard IP address in the setup phase (i.e. before anaconda
starts).
Status: still broken as of rawhide-20060731
199946 ? kickstart install exception: No such file or directory: '/tmp/ks-script.log'
Workaround: this happens at the end when it is running the post-install
scritps and your %post script does an NFS mount. The install works OK otherwise
but any %post scripts don't get run.
Status: fix verified in rawhide-20060727
199138 ? kernel panic during install bootup from create_gate_table
Workaround: none known
Status: fix verified in rawhide-20060723
199143 ? stage1 anaconda w/DHCP: "There was an error configuring your network
interface."
Workaround: use static ip in anaconda stage 1
Status: fix verified in rawhide-20060723
196709 ? anaconda improperly puts console=ttyS0 in elilo.conf
Workaround: when the system first boots up you will have no console unless
your system is one where the console truly is ttyS0. If you have networking
set up you can log in and manually fix elilo.conf.
Status: fix verified in rawhide-20060723
196719 ? selinux blocks NFS, ntp and probably others
Workaround: after installing modify the append= line in elilo.conf to add
selinux=0.
Status: fixed as of rawhide-20060723
195218 ? vnc reports wrong ip address under anaconda vnc install
Workaround: Not seen all the time. anaconda now gives you a shell whiler
vnc is running. You can start the shell to find the actual ip the system
is using. Connecting to that ip works properly.
Status: fix verified in rawhide-20060723
196705 ? anaconda complains with "unknown error" during VNC install
Workaround: just click the "close" button on the error message. The install
appears to continue with no problems.
Status: fix verified in rawhide-20060723
195250 ? anaconda hangs when given eth device that gets no dhcp response
Workaround: don't select the wrong eth device, you will need to hit reset.
Status: fix verified in rawhide-20060626 however timeout is _very_ long
so it may not appear to be fixed at first
196316 ? anaconda exception: iscsi instance has no attribute 'ipaddr'
Workaround: none
Status: fix verified in rawhide-20060626
192014 ? vnc install fails with a BadRequest
Status: Fixed! I was finally able to do a VNC install!!
<bz missing> - corrupted boot.img file
Status: Fixed
195021 ? anaconda asks for network info multiple times
Status: Fixed as of rawhide-20060619
193609 ? Error manually configuring network interface in text-mode install
Workaround: use DHCP when asked for network info to be used by installed
system.
Status: fixed as of rawhide-20060619
More information about the Fedora-ia64-list
mailing list