<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> <title></title> </head> <body bgcolor="#ffffff" text="#000000"> That worked... I did get an IPv6 when I allowed that to function, but since I don't have any other IPv6 machines on my home network I was never able to really test if IPv6 functioned correctly. But the noapic at boot time did the trick! Now my 2.6.xSMP kernel allows IPv4 traffic. Thank you very much. You get a gold-star. So what else can you tell me about my NIC (netgear FA311) and 2.6.xSMP and IPv4 not working, but IPv4 working in a non-SMP kernel? Thanks, again -Maurice Bas Vermeulen wrote: <blockquote cite="mid1091795215.1824.46.camel@laptop.blackstar.nl" type="cite"> <pre wrap="">On Fri, 2004-08-06 at 14:16, Maurice wrote: </pre> <blockquote type="cite"> <pre wrap="">Note: I've posted this to the Kernel-SMP list, already... FYI, I'm unable to get IPv4 running correctly when using a 2.6.xSMP kernel, but the "same" 2.6.x non-SMP kernel will allown IPv4 to function. </pre> </blockquote> <pre wrap=""> Are you able to make an IPv6 connection? If not, try 'noapic' when booting, as your interrupt could very well be non-functioning. It's one of the things I would try first, before swapping out your NIC for a different one (Intel E100 usually work fine). Bas Vermeulen </pre> <blockquote type="cite"> <pre wrap="">I have tried a short list of the basics and searched google for help, I also posted to my local LUG and tried a few additional things. The hardware this is happening on is; motherboard: ECS (elitegroup) D6VAA NIC: netgear FA311 DHCP server: Coyote Linux, has run for about two years. Below is the posting, two parts, to my local LUG; Part I I have a box at home that's ran RH9 for about two years (or when ever RH9 first came out plus a month) and I've done regular RHN updates as time went by. About a week ago I used some very good online directions to take my RH9 box to Fedora C1 (using some basic RPM's and YUM) and eventhing went fairly well, just had to make a few adjustments... Then a week after the now FC1 box proved to be stable and correctly operational I used the directions from the same site to update the FC1 to FC2, and that seemed to go well -- better than the RH9 to FC1, or so it seemed. I re-booted to see what, if anything, would fail on start-up. I did have a failure, the FA311 NIC card could no longer get an address from the DHCP server??? Seems that the NIC now only "runs" IPv6, and the info I've gathered from the Net isn't helping me correct this -- I must be searching the wrong phrase(s). Has anyone else followed this upgrade path and had the same problem? Has anyone else moved to the 2.6 kernel and had IPv4 problems? I've poked around and added line to certain system files and even gave the card a static IPv4 number -- but nothing has corrected this problem. -------- -Maurice "Linux -- it not just for breakfast anymore..." -Moe Part II After a lot of off-list help from Phillip, the SMP kernel still wouldn't allow IPv4 activity... Thanks for all your help Phillip. I then did a fresh install of FC2, just to see, and guess what -- nope -- the SMP kernel still wouldn't allow IPv4 traffic, but the non-SMP kernel worked fine. So then I installed SuSE 9.1 PRO, same deal, the SMP kernel would not allow IPv4 traffic. I then tested several LiveCD's; Knoppix 3.3 , Kernel 2.4.24-xfs #1 smp (NO) LindowsOS 4.5.212, Kernel 2.4.24 (YES) Morphix KDE 0.4.1, Kernel 2.4.21-xfs #13 smp (NO) SLAX 4.0.4, Kernel 2.4.25 (YES) The past kernel's used on the SMP box were; RH 9, Kernel 2.4.20-31.9 (YES) RH 9, Kernel 2.4.20-31.9smp (YES) FC1, Kernel 2.4.22-1.2197.nptl (YES) FC1, Kernel 2.4.22-1.2197.nptlsmp (YES) FC2, Kernel 2.6.6-1.435.2.3smp (NO) FC2, Kernel 2.6.6-1.4352.2.3 (YES) SuSE 9.1 PRO, Kernel 2.6.4-52-smp (NO) So there seems to be some issue with the 2.6 kernel and SMP, maybe based on my motherboard and/or NIC combination??? -------- -Maurice "Linux -- it not just for breakfast anymore..." -Moe -- fedora-legacy-list mailing list <a class="moz-txt-link-abbreviated" href="mailto:fedora-legacy-list@redhat.com">fedora-legacy-list@redhat.com</a> <a class="moz-txt-link-freetext" href="http://www.redhat.com/mailman/listinfo/fedora-legacy-list">http://www.redhat.com/mailman/listinfo/fedora-legacy-list</a> </pre> </blockquote> <pre wrap=""> -- fedora-legacy-list mailing list <a class="moz-txt-link-abbreviated" href="mailto:fedora-legacy-list@redhat.com">fedora-legacy-list@redhat.com</a> <a class="moz-txt-link-freetext" href="http://www.redhat.com/mailman/listinfo/fedora-legacy-list">http://www.redhat.com/mailman/listinfo/fedora-legacy-list</a> </pre> </blockquote> <pre class="moz-signature" cols="72"> </pre> </body> </html>