<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN"> <HTML> <HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8"> <META NAME="GENERATOR" CONTENT="GtkHTML/1.1.9"> </HEAD> <BODY> Ok. I recommend you to try nothing in Linux until you can get a ping from your modem in windows. Check if you have a modem/router. If that is so, you don't need PPPoE, the modem will NAT your box. Check for the manual, usually those modems have a web server enabled which you can use to configure everything. By the IP you are describing I think it might be one of those. On Tue, 2003-12-16 at 16:52, antonio montagnani wrote: <BLOCKQUOTE TYPE=CITE> <PRE>Hugo Perez Casanova ha scritto: > There are a couple of things you should check: > > 1. Does the modem uses 10.0.0.138 as its IP address? if so, set your > IP to 10.0.0.1 (C mask) and > do a ping, if it works retry with ppp > > 2. Some ADSL modems uses the IANA autoconfiguration address range, > check what IP is getting for > the ethernet from windows, then set it in the Linux box and try again. > > I have worked successfully with a couple of modems that behaves this way. > > Hope this helps. > > At least in Windows, it seems that modem is 192.168.0.1 and card is 192.168.0.14. Didn't try ping tonight, too tired from a good tennis play ;-) Maybe that is it connected to some issue on the card and not on the modem??? how to check if so??? Tnx</PRE> </BLOCKQUOTE> </BODY> </HTML>