<P>
Hi<BR>
<BR>
I run Fedora Core 1 (on a dual boot with Win 98) .. <BR>
<BR>
Recently I attached a cable modem to the m/c and set it up as below :<BR>
<BR>
Settings on eth0: (local n/w)<BR>
eth0 is connected to the local network and runs Samba and DHCPD (on eth0 only).  Set to a static IP of 192.168.1.1<BR>
<BR>
Settings on eth1 : (Motorola 5100 Surfboard cable modem)<BR>
Automatically obtain IP address settings with dhcp<BR>
DHCP Settings : Hostname is empty and Automatically obtain DNS is unchecked and Hardware is bound to the proper MAC address<BR>
<BR>
When I try to activate the eth1 interface it fails.  An ifconfig on eth1 returns the following output :<BR>
<BR>
[root@localhost root]# ifconfig eth1<BR>
eth1      Link encap:Ethernet  HWaddr 00:50:BA:08:43:4C<BR>
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1<BR>
          RX packets:864 errors:0 dropped:0 overruns:0 frame:0<BR>
          TX packets:10 errors:0 dropped:0 overruns:0 carrier:0<BR>
          collisions:0 txqueuelen:1000<BR>
          RX bytes:65356 (63.8 Kb)  TX bytes:3420 (3.3 Kb)<BR>
          Interrupt:11 Base address:0xc400<BR>
<BR>
<< The same cable connection on Win98 works without any hitches and I get connected>><BR>
<BR>
I want to use my Fedora box with the net and hence need help urgently<BR>
<BR>
Thanks in advance<BR>
Regards<BR>
Srini<BR>

</P>
<br><br>
<A target="_blank" HREF="http://clients.rediff.com/signature/track_sig.asp"><IMG SRC="http://ads.rediff.com/RealMedia/ads/adstream_nx.cgi/www.rediffmail.com/inbox.htm@Bottom" BORDER=0 VSPACE=0 HSPACE=0 HEIGHT=74 WIDTH=496></a>