<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.0.9">
</HEAD>
<BODY>
<BLOCKQUOTE TYPE=CITE>
<FONT COLOR="#737373"><I>I have downloaded from two separate sites disk 3 of the 4 set Fedore Core 2. I have tried four times, using 2 different types of CDs, to burn disk 3 to CD and have failed with a write error as described below.<BR>
<BR>
/home/cgar/perm/inssu cdrecord -v speed=52 dev=0,0,0 -data FC2-i386-disc3.iso<BR>
Cdrecord-Clone 2.01a19 (i686-redhat-linux-gnu)<BR>
TOC Type: 1 = CD-ROM<BR>
scsidev: '0,0,0'<BR>
scsibus: 0 target: 0 lun: 0<BR>
Linux sg driver version: 3.1.25<BR>
Using libscg version 'schily-0.7'<BR>
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling').<BR>
SCSI buffer size: 64512<BR>
atapi: 1<BR>
Device type : Removable CD-ROM<BR>
Version : 0<BR>
Response Format: 1<BR>
Vendor_info : 'ARTEC '<BR>
Identifikation : 'WRR-52Z '<BR>
Revision : '1.25'<BR>
Device seems to be: Generic mmc CD-RW.<BR>
Current: 0x0009<BR>
Profile: 0x0008<BR>
Profile: 0x0009 (current)<BR>
Profile: 0x000A<BR>
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).<BR>
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED<BR>
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R<BR>
Drive buf size : 1359872 = 1328 KB<BR>
FIFO size : 4194304 = 4096 KB<BR>
Track 01: data 638 MB<BR>
Total size: 732 MB (72:35.60) = 326670 sectors<BR>
Lout start: 733 MB (72:37/45) = 326670 sectors<BR>
Current Secsize: 2048<BR>
ATIP info from disk:<BR>
Indicated writing power: 5<BR>
Is not unrestricted<BR>
Is not erasable<BR>
Disk sub type: Medium Type A, high Beta category (A+) (3)<BR>
ATIP start of lead in: -11634 (97:26/66)<BR>
ATIP start of lead out: 359846 (79:59/71)<BR>
Disk type: Short strategy type (Phthalocyanine or similar)<BR>
Manuf. index: 3<BR>
Manufacturer: CMC Magnetics Corporation<BR>
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 33176<BR>
Forcespeed is OFF.<BR>
Starting to write CD/DVD at speed 48 in real TAO mode for single session.<BR>
Last chance to quit, starting real write 0 seconds. Operation starts.<BR>
Waiting for reader process to fill input buffer ... input buffer ready.<BR>
BURN-Free is OFF.<BR>
Performing OPC...<BR>
Starting new track at sector: 0<BR>
Track 01: 211 of 638 MB written (fifo 95%) [buf 2%] 33.3x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error<BR>
CDB: 2A 00 00 01 A6 03 00 00 1F 00<BR>
status: 0x2 (CHECK CONDITION)<BR>
Sense Bytes: F0 00 05 00 01 A6 0B 0C 00 00 00 00 10 02 00 00<BR>
Sense Key: 0x5 Illegal Request, Segment 0<BR>
Sense Code: 0x10 Qual 0x02 (id crc or ecc error) [No matching qualifier] Fru 0x0Sense flags: Blk 108043 (valid)<BR>
cmd finished after 0.015s timeout 40s<BR>
<BR>
write track data: error after 221255680 bytes<BR>
cdrecord: A write error occured.<BR>
cdrecord: Please properly read the error message above.<BR>
Writing time: 64.839s<BR>
Average write speed 76.1x.<BR>
Min drive buffer fill was 2%<BR>
Total of 1 possible drive buffer underruns predicted.<BR>
Fixating...<BR>
Fixating time: 15.748s<BR>
cdrecord: fifo had 3549 puts and 3486 gets.<BR>
cdrecord: fifo was 0 times empty and 1261 times full, min fill was 14%.<BR>
</I></FONT><BR>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
<BR>
</TD>
</TR>
</TABLE>
</BLOCKQUOTE>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
<HR SIZE="3" LENGTH="60%">
Clair Garman 301-270-2248 Takoma Park, MD <BR>
<BR>
The remarkable thing about my mother is that for thirty years she served <BR>
us nothing but leftovers. The original meal has never been found.
</TD>
</TR>
</TABLE>
</BODY>
</HTML>