<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN"> <HTML> <HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8"> <META NAME="GENERATOR" CONTENT="GtkHTML/3.0.10"> </HEAD> <BODY> Forget gnome toaster, it's obsolete. It simply won't work with the 2.6 kernels if you're using an IDE CD writer. Use K3b (it's in the distro) or burn CDs manually with cdrecord. See this bugzilla report and the explanation for more details: <A HREF="http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=120492">http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=120492</A> On Wed, 2004-07-14 at 23:47, francesco wrote: <BLOCKQUOTE TYPE=CITE> <PRE>>Date: Wed, 14 Jul 2004 23:10:13 +0200 >From: antonio montagnani > > >Subject: Re: Gnome toaster doesn't works > > >francesco wrote/ha scritto, On/il 14/07/2004 21:00: Hi Antonio, here is my etc/cdrecord.conf file, thanks Francesco #ident @(#)cdrecord.dfl 1.4 02/07/07 Copyr 1998 J. Schilling # # This file is /etc/cdrecord.conf # It contains defaults that are used if no command line option # or environment is present. # # The default device, if not specified elswhere # CDR_DEVICE=yamaha # # The default speed, if not specified elswhere # # Note that newer cdrecord versions do not default # to speed=1. For MMC compliant drives, the default # is to write at maximum speed, so it in general does # not make sense to set up a default speed in /etc/cdrecord.conf # #CDR_SPEED=40 # # The default FIFO size if, not specified elswhere # CDR_FIFOSIZE=4m # # The following definitions allow abstract device names. # They are used if the device name does not contain the # the characters ',', ':', '/' and '@' # # Unless you have a good reason, use speed == -1 and let # cdrecord use it's intercal drive specific defaults. # # drive name device speed fifosize driveropts # teac= 1,3,0 -1 -1 "" panasonic= 1,4,0 -1 -1 "" plextor= 1,4,0 -1 -1 "" sanyo= 1,4,0 -1 -1 burnfree yamaha= 1,5,0 -1 -1 "" cdrom= 0,6,0 2 1m "" -- Francesco </PRE> </BLOCKQUOTE> </BODY> </HTML>