<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN"> <HTML> <HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8"> <META NAME="GENERATOR" CONTENT="GtkHTML/3.1.17"> </HEAD> <BODY> Well, the jumper change didn't help. I may have needed to reset the bus? Anyway, the solution to the _other_ problem was my scsi ordering. I needed to specify in grub which drivers to load with the simple 'scsihost' option. <A HREF="http://www.torque.net/scsi/scsihosts.html">http://www.torque.net/scsi/scsihosts.html</A> While I'm here, anybody know where to purchase scsi Y-cables so I can maintain termination when machines are off? -n. On Tue, 2004-07-20 at 17:22 +0900, Naoki wrote: <BLOCKQUOTE TYPE=CITE> And lo, yes there is a solution ( though I've not yet tested it ).. <A HREF="http://milano.usal.es/afzazo/iat2/scsi.htm">http://milano.usal.es/afzazo/iat2/scsi.htm</A> Tells all about jumper 4, which you should close in order to manually terminate. -n. On Fri, 2004-07-16 at 14:59 +0900, Naoki wrote: <BLOCKQUOTE TYPE=CITE> Termination, that was the problem.. Seems when the other machine connected to the array is off there is no termination, which stands to reasons but why no auto termination? Once properly terminated all problems are solved. Except if the other machine ever goes down I get scsi bus problems which will pretty much kill the other machine. doh. </BLOCKQUOTE> </BLOCKQUOTE> </BODY> </HTML>