Linux version 2.6.9-1.681_FC3.stk16 (root@wolf.linuxant.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Mon Nov 22 16:44:32 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002ff60000 (usable) BIOS-e820: 000000002ff60000 - 000000002ff77000 (ACPI data) BIOS-e820: 000000002ff77000 - 000000002ff79000 (ACPI NVS) BIOS-e820: 000000002ff80000 - 0000000030000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 767MB LOWMEM available. zapping low mappings. On node 0 totalpages: 196448 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 192352 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. Built 1 zonelists Kernel command line: ro root=LABEL=/ rhgb quiet acpi=off Initializing CPU#0 CPU 0 irqstacks, hard=c03f4000 soft=c03f0000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1694.794 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 774452k/785792k available (2118k kernel code, 10804k reserved, 660k data, 148k init, 0k highmem) Calibrating delay loop... 3350.52 BogoMIPS (lpj=1675264) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9f1bf 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 387k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Discovered primary peer bus 09 [IRQ] PCI: Using IRQ router PIIX/ICH [8086/24cc] at 0000:00:1f.0 PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 11 for device 0000:00:1f.1 PCI: Sharing IRQ 11 with 0000:00:1d.2 PCI: Sharing IRQ 11 with 0000:02:02.0 IBM machine detected. Enabling interrupts during APM calls. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) audit: initializing netlink socket (disabled) audit(1106493370.4294965785:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 9F28925150E1013C - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: probe of vesafb0 failed with error -6 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: Maximum main memory to use for agp memory: 690M agpgart: AGP aperture is 256M @ 0xd0000000 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled PCI: Found IRQ 11 for device 0000:00:1f.6 PCI: Sharing IRQ 11 with 0000:00:1f.3 PCI: Sharing IRQ 11 with 0000:00:1f.5 PCI: Sharing IRQ 11 with 0000:02:00.1 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) PCI: Found IRQ 11 for device 0000:00:1f.1 PCI: Sharing IRQ 11 with 0000:00:1d.2 PCI: Sharing IRQ 11 with 0000:02:02.0 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: FUJITSU MHT2040AH, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: UJDA755yDVD/CDRW, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1 Firmware: 5.9 Sensor: 44 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection -> pass-through port input: SynPS/2 Synaptics TouchPad on isa0060/serio1 serio: Synaptics pass-through port at isa0060/serio1/input0 input: PS/2 Generic Mouse on synaptics-pt/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 37449) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 speedstep-centrino: no table support for CPU model "Intel(R) Pentium(R) M processor 1.70GHz": speedstep-centrino: try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled Freeing unused kernel memory: 148k freed EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks inserting floppy driver for 2.6.9-1.681_FC3.stk16 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 e1000: Ignoring new-style parameters in presence of obsolete ones Intel(R) PRO/1000 Network Driver - version 5.3.19-k2-NAPI Copyright (c) 1999-2004 Intel Corporation. PCI: Found IRQ 11 for device 0000:02:01.0 PCI: Sharing IRQ 11 with 0000:00:1d.0 PCI: Sharing IRQ 11 with 0000:01:00.0 PCI: Sharing IRQ 11 with 0000:02:00.0 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection divert: allocating divert_blk for eth0 ip_tables: (C) 2000-2002 Netfilter core team PCI: Found IRQ 11 for device 0000:00:1f.5 PCI: Sharing IRQ 11 with 0000:00:1f.3 PCI: Sharing IRQ 11 with 0000:00:1f.6 PCI: Sharing IRQ 11 with 0000:02:00.1 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49438 usecs intel8x0: clocking to 48000 PCI: Found IRQ 11 for device 0000:00:1f.6 PCI: Sharing IRQ 11 with 0000:00:1f.3 PCI: Sharing IRQ 11 with 0000:00:1f.5 PCI: Sharing IRQ 11 with 0000:02:00.1 PCI: Setting latency timer of device 0000:00:1f.6 to 64 MC'97 1 converters and GPIO not ready (0xff00) hw_random hardware driver 1.0.0 loaded PCI: Found IRQ 11 for device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 11, pci mem f08e6000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.2 PCI: Found IRQ 11 for device 0000:00:1d.0 PCI: Sharing IRQ 11 with 0000:01:00.0 PCI: Sharing IRQ 11 with 0000:02:00.0 PCI: Sharing IRQ 11 with 0000:02:01.0 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 11, io base 00001800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:1d.1 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 11, io base 00001820 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:1d.2 PCI: Sharing IRQ 11 with 0000:00:1f.1 PCI: Sharing IRQ 11 with 0000:02:02.0 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 11, io base 00001840 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Linux Kernel Card Services options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 0000:02:00.0 PCI: Sharing IRQ 11 with 0000:00:1d.0 PCI: Sharing IRQ 11 with 0000:01:00.0 PCI: Sharing IRQ 11 with 0000:02:01.0 Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:00.0, mfunc 0x01d21b22, devctl 0x64 Yenta: ISA IRQ mask 0x06b8, PCI irq 11 Socket status: 30000086 PCI: Found IRQ 11 for device 0000:02:00.1 PCI: Sharing IRQ 11 with 0000:00:1f.3 PCI: Sharing IRQ 11 with 0000:00:1f.5 PCI: Sharing IRQ 11 with 0000:00:1f.6 Yenta: CardBus bridge found at 0000:02:00.1 [1014:0552] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:00.1, mfunc 0x01d21b22, devctl 0x64 Yenta: ISA IRQ mask 0x06b8, PCI irq 11 Socket status: 30000086 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET: Registered protocol family 10 Disabled Privacy Extensions on device c0377c20(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ip_tables: (C) 2000-2002 Netfilter core team mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available eth0: no IPv6 routers present EXT3 FS on hda2, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 524152k swap on /dev/hda3. Priority:-1 extents:1 IA-32 Microcode Update Driver: v1.14 microcode: No new microdata for cpu 0 parport0: PC-style at 0x3bc [PCSPP,TRISTATE] ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (6139 buckets, 49112 max) - 356 bytes per conntrack driverloader: module license 'see LICENSE file; Copyright (c)2003-2004 Linuxant inc.' taints kernel. driverloader: stack=16384/76/0 REGPARM usbcore: registered new driver driverloader PCI: Found IRQ 11 for device 0000:02:02.0 PCI: Sharing IRQ 11 with 0000:00:1d.2 PCI: Sharing IRQ 11 with 0000:00:1f.1 divert: allocating divert_blk for eth1 eth1: New link status: Disconnected (0002) eth1: WPA, TKIP, WEP128, WEP64 supported eth1: Intel(R) PRO/Wireless 2200 LAN Card Driver at 0000:02:02.0 (MAC address 00:0E:35:4C:C6:8A) ready eth1: New link status: Connected (0001) cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. i2c /dev entries driver parport0: PC-style at 0x3bc [PCSPP,TRISTATE] lp0: using parport0 (polling). lp0: console ready eth1: no IPv6 routers present mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available eth1: entering sleep mode (state=3) eth1: New link status: Disconnected (0002) eth1: changed to state D3 PCI: Setting latency timer of device 0000:00:1d.0 to 64 PCI: Setting latency timer of device 0000:00:1d.0 to 64 PCI: Setting latency timer of device 0000:00:1d.1 to 64 PCI: Setting latency timer of device 0000:00:1d.1 to 64 PCI: Setting latency timer of device 0000:00:1d.2 to 64 PCI: Setting latency timer of device 0000:00:1d.2 to 64 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PCI: Found IRQ 11 for device 0000:00:1f.1 PCI: Sharing IRQ 11 with 0000:00:1d.2 PCI: Sharing IRQ 11 with 0000:02:02.0 PCI: Found IRQ 11 for device 0000:00:1f.5 PCI: Sharing IRQ 11 with 0000:00:1f.3 PCI: Sharing IRQ 11 with 0000:00:1f.6 PCI: Sharing IRQ 11 with 0000:02:00.1 PCI: Setting latency timer of device 0000:00:1f.5 to 64 PCI: Found IRQ 11 for device 0000:00:1f.6 PCI: Sharing IRQ 11 with 0000:00:1f.3 PCI: Sharing IRQ 11 with 0000:00:1f.5 PCI: Sharing IRQ 11 with 0000:02:00.1 PCI: Setting latency timer of device 0000:00:1f.6 to 64 PCI: Enabling device 0000:02:01.0 (0000 -> 0003) PCI: Found IRQ 11 for device 0000:02:01.0 PCI: Sharing IRQ 11 with 0000:00:1d.0 PCI: Sharing IRQ 11 with 0000:01:00.0 PCI: Sharing IRQ 11 with 0000:02:00.0 eth1: waking up eth1: changed to state D0 hub 1-0:1.0: reactivate --> -22 hub 1-0:1.0: reactivate --> -22 hub 2-0:1.0: reactivate --> -22 hub 3-0:1.0: reactivate --> -22 hub 4-0:1.0: reactivate --> -22 eth1: New link status: Connected (0001) Disabled Privacy Extensions on device c0377c20(lo) eth1: no IPv6 routers present