[root@localhost ~]# smartctl -a /dev/hda smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: IC25N030ATCS04-0 Serial Number: CSH305DAG9LNRB Firmware Version: CA3OA71A User Capacity: 30,005,821,440 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 3 Local Time is: Sat Mar 26 23:20:33 2005 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 118) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 37) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 095 095 062 Pre-fail Always - 262153 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 152 152 033 Pre-fail Always - 1 4 Start_Stop_Count 0x0012 098 098 000 Old_age Always - 3586 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 082 082 000 Old_age Always - 7956 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1004 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 1 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 59 193 Load_Cycle_Count 0x0012 089 089 000 Old_age Always - 114657 194 Temperature_Celsius 0x0002 125 125 000 Old_age Always - 44 (Lifetime Min/Max 18/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 73 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 62 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 62 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 30 58 e2 7a e1 Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 30 58 e2 7a e1 00 00:13:11.600 READ DMA c8 00 38 50 e2 7a e1 00 00:13:07.300 READ DMA c8 00 40 48 e2 7a e1 00 00:13:03.000 READ DMA c8 00 48 40 e2 7a e1 00 00:12:58.600 READ DMA c8 00 50 38 e2 7a e1 00 00:12:54.200 READ DMA Error 61 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 30 58 e2 7a e1 Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 38 50 e2 7a e1 00 00:13:07.300 READ DMA c8 00 40 48 e2 7a e1 00 00:13:03.000 READ DMA c8 00 48 40 e2 7a e1 00 00:12:58.600 READ DMA c8 00 50 38 e2 7a e1 00 00:12:54.200 READ DMA c8 00 58 30 e2 7a e1 00 00:12:49.900 READ DMA Error 60 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 30 58 e2 7a e1 Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 40 48 e2 7a e1 00 00:13:03.000 READ DMA c8 00 48 40 e2 7a e1 00 00:12:58.600 READ DMA c8 00 50 38 e2 7a e1 00 00:12:54.200 READ DMA c8 00 58 30 e2 7a e1 00 00:12:49.900 READ DMA c8 00 60 28 e2 7a e1 00 00:12:45.600 READ DMA Error 59 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 30 58 e2 7a e1 Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 48 40 e2 7a e1 00 00:12:58.600 READ DMA c8 00 50 38 e2 7a e1 00 00:12:54.200 READ DMA c8 00 58 30 e2 7a e1 00 00:12:49.900 READ DMA c8 00 60 28 e2 7a e1 00 00:12:45.600 READ DMA c8 00 68 20 e2 7a e1 00 00:12:41.200 READ DMA Error 58 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 30 58 e2 7a e1 Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 50 38 e2 7a e1 00 00:12:54.200 READ DMA c8 00 58 30 e2 7a e1 00 00:12:49.900 READ DMA c8 00 60 28 e2 7a e1 00 00:12:45.600 READ DMA c8 00 68 20 e2 7a e1 00 00:12:41.200 READ DMA c8 00 70 18 e2 7a e1 00 00:12:36.800 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 60% 7954 24781646 # 2 Extended offline Completed: read failure 60% 7953 24781646 Device does not support Selective Self Tests/Logging [root@localhost ~]#