[root@localhost ~]# smartctl -t long /dev/hdX
smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

Smartctl open device: /dev/hdX failed: No such file or directory
[root@localhost ~]# smartctl -t long /dev/hda
smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 37 minutes for test to complete.
Test will complete after Sat Mar 26 21:30:11 2005

Use smartctl -X to abort test.
[root@localhost ~]# smartctl -a /dev/hda
smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     IC25N030ATCS04-0
Serial Number:    CSH305DAG9LNRB
Firmware Version: CA3OA71A
User Capacity:    30,005,821,440 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   5
ATA Standard is:  ATA/ATAPI-5 T13 1321D revision 3
Local Time is:    Sat Mar 26 20:53:46 2005 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 249) Self-test routine in progress...
                                        90% of test remaining.
Total time to complete Offline
data collection:                 ( 645) seconds.
Offline data collection
capabilities:                    (0x1b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        No Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  37) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   096   096   062    Pre-fail  Always       -       9
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   152   152   033    Pre-fail  Always       -       1
  4 Start_Stop_Count        0x0012   098   098   000    Old_age   Always       -       3586
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   082   082   000    Old_age   Always       -       7953
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1004
191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       65536
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       59
193 Load_Cycle_Count        0x0012   089   089   000    Old_age   Always       -       114657
194 Temperature_Celsius     0x0002   119   119   000    Old_age   Always       -       46 (Lifetime Min/Max 18/57)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       73
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 62 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 62 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 30 58 e2 7a e1  Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 30 58 e2 7a e1 00      00:13:11.600  READ DMA
  c8 00 38 50 e2 7a e1 00      00:13:07.300  READ DMA
  c8 00 40 48 e2 7a e1 00      00:13:03.000  READ DMA
  c8 00 48 40 e2 7a e1 00      00:12:58.600  READ DMA
  c8 00 50 38 e2 7a e1 00      00:12:54.200  READ DMA

Error 61 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 30 58 e2 7a e1  Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 38 50 e2 7a e1 00      00:13:07.300  READ DMA
  c8 00 40 48 e2 7a e1 00      00:13:03.000  READ DMA
  c8 00 48 40 e2 7a e1 00      00:12:58.600  READ DMA
  c8 00 50 38 e2 7a e1 00      00:12:54.200  READ DMA
  c8 00 58 30 e2 7a e1 00      00:12:49.900  READ DMA

Error 60 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 30 58 e2 7a e1  Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 40 48 e2 7a e1 00      00:13:03.000  READ DMA
  c8 00 48 40 e2 7a e1 00      00:12:58.600  READ DMA
  c8 00 50 38 e2 7a e1 00      00:12:54.200  READ DMA
  c8 00 58 30 e2 7a e1 00      00:12:49.900  READ DMA
  c8 00 60 28 e2 7a e1 00      00:12:45.600  READ DMA

Error 59 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 30 58 e2 7a e1  Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 48 40 e2 7a e1 00      00:12:58.600  READ DMA
  c8 00 50 38 e2 7a e1 00      00:12:54.200  READ DMA
  c8 00 58 30 e2 7a e1 00      00:12:49.900  READ DMA
  c8 00 60 28 e2 7a e1 00      00:12:45.600  READ DMA
  c8 00 68 20 e2 7a e1 00      00:12:41.200  READ DMA

Error 58 occurred at disk power-on lifetime: 7952 hours (331 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 30 58 e2 7a e1  Error: UNC 48 sectors at LBA = 0x017ae258 = 24830552

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 50 38 e2 7a e1 00      00:12:54.200  READ DMA
  c8 00 58 30 e2 7a e1 00      00:12:49.900  READ DMA
  c8 00 60 28 e2 7a e1 00      00:12:45.600  READ DMA
  c8 00 68 20 e2 7a e1 00      00:12:41.200  READ DMA
  c8 00 70 18 e2 7a e1 00      00:12:36.800  READ DMA

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Device does not support Selective Self Tests/Logging
[root@localhost ~]#

