<div>I do the mkfs again and here is the result of mkfs</div>
<div>-------------------------------------------</div>
<div>[root@web ~]# umount /backup<br>[root@web ~]# mkfs -V -t ext3 /dev/hdd1<br>mkfs version 2.12a (Oct 19 2004)<br>mkfs.ext3 /dev/hdd1 <br>mke2fs 1.35 (28-Feb-2004)<br>max_blocks 4294967295, rsv_groups = 0, rsv_gdb = 1024
<br>Filesystem label=<br>OS type: Linux<br>Block size=4096 (log=2)<br>Fragment size=4096 (log=2)<br>24428544 inodes, 48839600 blocks<br>2441980 blocks (5.00%) reserved for the super user<br>First data block=0<br>Maximum filesystem blocks=50331648
<br>1491 block groups<br>32768 blocks per group, 32768 fragments per group<br>16384 inodes per group<br>Superblock backups stored on blocks: <br> 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
<br> 4096000, 7962624, 11239424, 20480000, 23887872</div>
<div><br>Writing inode tables: done <br>ext2fs_mkdir: Attempt to read block from filesystem resulted in short read while creating root dir</div>
<div> </div>
<div>-----------------------</div>
<div>After I do this I cannot mount or fdisk the /dev/hdd1.</div>
<div> </div>
<div>
<p>[root@web /]# mount -t ext3 /dev/hdd1 /backup1<br>mount: mount point /backup1 does not exist<br>[root@web /]# mount -t ext3 /dev/hdd1 /backup<br>mount: wrong fs type, bad option, bad superblock on /dev/hdd1,<br> or too many mounted file systems
<br>[root@web /]# fdisk /dev/hdd</p>
<p>Unable to read /dev/hdd<br>[root@web /]# </p>
<p>------------------------------------</p>
<p>What happen to me? Any suggestion.</p>
<p>Amrit</p>
<p> </p></div>
<p>Writing inode tables: done <br>ext2fs_mkdir: Attempt to read block from filesystem resulted in short read while creating root dir<br>[root@web ~]# </p><br><br>
<div><span class="gmail_quote">2006/2/21, Amrit Angsusingh <<a href="mailto:amritangs@gmail.com">amritangs@gmail.com</a>>:</span>
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<div>Although I certainly sure that I do already use the fdisk and mkfs on Hdd , I will do it again. But is there any other reason for that for ex. setting jumper on hdd?</div>
<div> </div>
<div>After I do 'mkfs' it and set the fstab to ext3 then I reboot the system , the FC3 cannot mount the /dev/hdd1 and the system hang up for a long time [more than 1/2 hour] and it asked for root password to enter the system to recover and I must marked the fstab /dev/hdd1 and then reboot , the server will boot properly but the fstab will then automatically create the line
</div><span class="q">
<div>dev/hdd1 /mnt/idedisk1 auto amconsole,exec,noauto,managed 0 0</div></span>
<div>and the fourth system will be read only and could not be unmount.<br>Amrit<br> </div>
<div><span class="gmail_quote">2006/2/21, Bruno Wolff III <<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:bruno@wolff.to" target="_blank">bruno@wolff.to</a>>:</span>
<div><span class="e" id="q_1098ac4b5fa7c414_3">
<blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">On Mon, Feb 20, 2006 at 23:53:47 +0700,<br>Amrit Angsusingh <<a onclick="return top.js.OpenExtLink(window,event,this)" href="mailto:amritangs@gmail.com" target="_blank">
amritangs@gmail.com </a>> wrote:<br>> I used pentium 4 mechine with 256 Mb ram and fedora core 3 for web server<br>> and four IDE HDDs [160 Gbx4] on both primary ans secondary IDE. The bios<br>> also detected all 4 HDD but after starting FC3 the system mount secondary
<br>> slave HDD /dev/hdd1 as /mnt/idedisk1<br>> /dev/hda1 / ext3 defaults 1 1<br>> none /dev/pts devpts gid=5,mode=620 0 0<br>> none /dev/shm tmpfs defaults 0 0
<br>> /dev/hdc1 /mec ext3 defaults 1 2<br>> none /proc proc defaults 0 0<br>> none /sys sysfs defaults 0 0
<br>> /dev/hdb1 /var ext3 defaults 1 2<br>> /dev/hda2 swap swap defaults 0 0<br>><br>> /dev/hdd1 /mnt/idedisk1 auto amconsole,exec,noauto,managed 0 0
<br>><br>> which appeared to be the read only device. I cannot umount this device and<br>> mount it to /dev/hdd1 ext3 . I would like to use this HDD to store the<br>> nackup data. Does any one tell me how to do this?
<br><br>Have you put a file system on it yet? If not you can use mkfs to do that.<br></blockquote></span></div></div><span class="sg"><br><br clear="all"><br>-- <br>Amrit Angsusingh<br><br>Thailand </span></blockquote></div>
<br><br clear="all"><br>-- <br>Amrit Angsusingh<br>Thailand