Hi, I am currently using a compaq nx7010 laptop with FC5. I seem to be having trouble with the wirless configuration. I have a ipw2200 card built in, I have used livna to install the latest drivers but can not get fedora to use it can someone please help. ipw2200-firmware-3.0-1.lvn5 kernel2.6.17-1.2139_FC5 ifcfg-eth1 # Intel Corp.|PRO/Wireless LAN 2200 3B Mini PCI Adapter DEVICE=eth1 ONBOOT=yes BOOTPROTO=dhcp MODE=Managed ESSID=HOME-NET #lspci |grep ipw I get nothing back #rmmod ipw2100 again nothing back #modprobe ipw2200 nothing #cat /var/log/dmesg |grep ipw ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 ipw2100: Copyright(c) 2003-2006 Intel Corporation ipw2100: Detected Intel PRO/Wireless 2100 Network Connection ipw2100: eth0: Firmware 'ipw2100-1.3.fw' not available or load failed. ipw2100: eth0: ipw2100_get_firmware failed: -2 ipw2100: eth0: Failed to power on the adapter. ipw2100: eth0: Failed to start the firmware. ipw2100Error calling register_netdev. ipw2100: probe of 0000:02:02.0 failed with error -5 #ifup eth1 ipw2100 device eth1 does not seem to be present, delaying initialization. I have tried to rpm -qa | grep ipw but only the ipw2200 driver shows up How do I remove ipw2100 and configure it to use the ipw2200 driver? (I think I installed this once a long time ago.) As it looks like this is the cause. Paul