Hello, I am trying to get the Netgear WAG511v2 wireless pcmcia card to work on my Dell Desktop. Configration:::::::::::: fedora core 3 2.6.15 pcmcia-cs-3.2.8 madwifi-ng-r1454 CBS52U Cardbus PC Card Adapter I am doing the following:::::::::: modprobe ath_pci iwconfig I dont see any error messages but nothing seems to be working. I am new to this pcmcia stuff so any pointers will be much appriciated. Outputs:::::::::: ________iwconfig: lo no wireless extensions. eth0 no wireless extensions. sit0 no wireless extensions. ___________lspci -v: 03:02.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 82) Flags: bus master, medium devsel, latency 168, IRQ 177 Memory at dfc00000 (32-bit, non-prefetchable) [size=4K] Bus: primary=03, secondary=04, subordinate=07, sec-latency=176 Memory window 0: 30000000-31fff000 (prefetchable) Memory window 1: 34000000-35fff000 I/O window 0: 0000d000-0000d0ff I/O window 1: 0000d400-0000d4ff 16-bit legacy interface ports at 0001 03:02.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 82) Flags: bus master, medium devsel, latency 168, IRQ 185 Memory at dfc01000 (32-bit, non-prefetchable) [size=4K] Bus: primary=03, secondary=08, subordinate=0b, sec-latency=176 Memory window 0: 32000000-33fff000 (prefetchable) Memory window 1: 36000000-37fff000 I/O window 0: 0000d800-0000d8ff I/O window 1: 00001000-000010ff 16-bit legacy interface ports at 0001 ____________cardctl info: PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 ________dmesg: PCI: Calling quirk c0287eca for 0000:03:08.0 PCI: Calling quirk c0288019 for 0000:03:08.0 PCI: Fixups for bus 0000:03 PCI: Transparent bridge - 0000:00:1e.0 PCI: Scanning behind PCI bridge 0000:03: 02.0, config 000000, pass 0 PCI: Scanning behind PCI bridge 0000:03:02.1, config 000000, pass 0 PCI: Scanning behind PCI bridge 0000:03:02.0, config 000000, pass 1 PCI: Scanning behind PCI bridge 0000:03:02.1, config 000000, pass 1 PCI: Bus scan for 0000:03 returning with max=0b PCI: Scanning behind PCI bridge 0000:00:1c.0, config 010100, pass 1 PCI: Scanning behind PCI bridge 0000:00:1c.1, config 020200, pass 1 PCI: Scanning behind PCI bridge 0000:00: 1e.0, config 030300, pass 1 PCI: Bus scan for 0000:00 returning with max=0b PCI: Using IRQ router PIIX/ICH [8086/2640] at 0000:00:1f.0 PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 201 PCI->APIC IRQ transform: 0000:00: 1d.1[B] -> IRQ 209 PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 177 PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 217 PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 201 PCI->APIC IRQ transform: 0000:00: 1f.1[A] -> IRQ 161 PCI->APIC IRQ transform: 0000:00:1f.2[C] -> IRQ 193 PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 169 PCI->APIC IRQ transform: 0000:03:02.0[A] -> IRQ 177 PCI->APIC IRQ transform: 0000:03: 02.1[B] -> IRQ 185 PCI: using PPB 0000:00:1e.0[A] to get irq 23 PCI->APIC IRQ transform: 0000:03:08.0[A] -> IRQ 217 PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: dfe00000-dfefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: dfd00000-dfdfffff PREFETCH window: disabled. got res [dfc00000:dfc00fff] bus [dfc00000:dfc00fff] flags 200 for BAR 0 of 0000:03: 02.0 PCI: moved device 0000:03:02.0 resource 0 (200) to dfc00000 got res [dfc01000:dfc01fff] bus [dfc01000:dfc01fff] flags 200 for BAR 0 of 0000:03:02.1 PCI: moved device 0000:03:02.1 resource 0 (200) to dfc01000 PCI: Bus 4, cardbus bridge: 0000:03:02.0 IO window: 0000d000-0000d0ff IO window: 0000d400-0000d4ff PREFETCH window: 30000000-31ffffff MEM window: 34000000-35ffffff PCI: Bus 8, cardbus bridge: 0000:03: 02.1 IO window: 0000d800-0000d8ff IO window: 00001000-000010ff PREFETCH window: 32000000-33ffffff MEM window: 36000000-37ffffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: dfc00000-dfcfffff PREFETCH window: 30000000-33ffffff PCI: No IRQ known for interrupt pin A of device 0000:00:1c.0. Probably buggy MP table. PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: No IRQ known for interrupt pin B of device 0000:00: 1c.1. Probably buggy MP table. <...snip...> PCI: Calling quirk c01c9091 for 0000:03:08.0 PCI: Calling quirk c01c925f for 0000:03:08.0 PCI: Calling quirk c026d520 for 0000:03:08.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Yenta: CardBus bridge found at 0000:03:02.0 [0000:0000] Yenta: ISA IRQ mask 0x0000, PCI irq 177 Socket status: 30000820 pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff cs: IO port probe 0xd000-0xdfff: clean. pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff Yenta: CardBus bridge found at 0000:03: 02.1 [0000:0000] Yenta: ISA IRQ mask 0x0000, PCI irq 185 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff cs: IO port probe 0xd000-0xdfff: clean. pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff ds: ds_open(socket 0) pcmcia: Detected deprecated PCMCIA ioctl usage. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see <a href="http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html </a> for details. cs: IO port probe 0xc00-0xcff: excluding 0xc00-0xc7f cs: IO port probe 0xc00-0xcff: excluding 0xc00-0xc7f cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0xa00-0xaff: clean. ds: ds_open(socket 1) ds: ds_open(socket 2) ds: ds_release(socket 0) ds: ds_release(socket 1) ds: ds_open(socket 0) ds: ds_open(socket 1) ds: ds_open(socket 2) ds: ds_open(socket 2) lp: driver loaded but no devices found [drm] Initialized i915 1.1.0 20040405 on minor 0: mtrr: base(0xc0020000) is not aligned on a size(0x258000) boundary ds: ds_open(socket 0) ds: ds_open(socket 1) ds: ds_open(socket 2) ath_hal: module license 'Proprietary' taints kernel. ath_hal: <a href="http://0.9.16.16/" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">0.9.16.16</a> (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) wlan: <a href="http://0.8.4.2/" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)"> 0.8.4.2</a> (svn 1454) ath_rate_sample: 1.2 (svn 1454) ath_pci: <a href="http://0.9.4.5/" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)"> 0.9.4.5</a> (svn 1454) -- First they ignore you, then they laugh at you, then they fight you, then you win. Mohandas Gandhi