<div>Hi Tod, and thanks for the answer, I was hopping someone had a simpler one </div> <div>but I will do what you said. </div> <div>Orlando </div> <div>On 2/12/07, Tod Merley <<a href="mailto:todbot88@gmail.com">todbot88@gmail.com</a>> wrote: <blockquote class="gmail_quote" style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Hi Orlando! I cannot answer this but may be able to point you in a direction which will. When linux boots the bootloader (first sector) loads a "second stage (sometimes stage 1.5) which contains enough information to talk with the disk system. Probably this part goes ok (you do need to consider that when you do load linux on the hard drive you will either need to use it's supplied GRUB bootloader and point it to your XP installation or use the XP bootloader and point it to linux - definitely spend some time googling "Linux XP dual boot"). It then loads an small Kernel and associated RAM disk image into memory and pivots control to there. In order for this to work the RAM disk image must have the drivers for your raid system included. Google "linux RAM disk image driver" possible with the specifics of your hardware and you may well get to where you need to be. Good Hunting! Tod On 2/12/07, Orlando Reis <<a href="mailto:reis.orlando@gmail.com">reis.orlando@gmail.com</a>> wrote: > Hi, I'm having some problems installing Fedora Core 6 on a ULI based raid0 > host. > > Someone told me that the drivers where outdated and not working, that this > was the reason for not being able > to see my raid0 unit when installing? > > This is driving me nuts. I can't install to hardware but i also can't > install it using vmware which doesn't make any sense at all :( > > Motherboard asusp5rd2-vm AliM5229 with uli M1575 raid. > > 2*80G Segate Sata 2 hard disks > > Raid is enabled on BIOS and I currently have XP working on the first > partition with 90G. > > I tried in vain to go to ULI web page and check for drivers but those that > are there also outdated. As anyone else had a similiar problem? > > Orlando > -- > fedora-list mailing list > <a href="mailto:fedora-list@redhat.com">fedora-list@redhat.com</a> > To unsubscribe: > <a href="https://www.redhat.com/mailman/listinfo/fedora-list">https://www.redhat.com/mailman/listinfo/fedora-list </a> > -- fedora-list mailing list <a href="mailto:fedora-list@redhat.com">fedora-list@redhat.com</a> To unsubscribe: <a href="https://www.redhat.com/mailman/listinfo/fedora-list">https://www.redhat.com/mailman/listinfo/fedora-list </a> </blockquote></div>