nit
<6>pnp: PnP ACPI: found 14 devices
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
<6>NetLabel: Initializing
<6>NetLabel:  domain hash size = 128
<6>NetLabel:  protocols = UNLABELED CIPSOv4
<6>NetLabel:  unlabeled traffic allowed by default
<6>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
<6>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
<6>pnp: 00:00: iomem range 0x100000-0x3e7fffff could not be reserved
<6>Time: tsc clocksource has been installed.
<6>Switched to high resolution mode on CPU 0
<6>pnp: 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
<6>pnp: 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
<6>pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
<6>pnp: 00:0c: ioport range 0x2f8-0x2ff has been reserved
<6>pnp: 00:0c: ioport range 0x3f8-0x3ff has been reserved
<6>pnp: 00:0c: ioport range 0x1000-0x107f has been reserved
<6>Switched to high resolution mode on CPU 1
<6>pnp: 00:0c: ioport range 0x1100-0x113f has been reserved
<6>pnp: 00:0c: ioport range 0x1200-0x121f has been reserved
<6>pnp: 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
<6>pnp: 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved
<6>pnp: 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved
<6>pnp: 00:0c: iomem range 0xfed45000-0xfed8ffff could not be reserved
<6>pnp: 00:0d: iomem range 0xcee00-0xcffff has been reserved
<6>pnp: 00:0d: iomem range 0xd2000-0xd3fff has been reserved
<6>pnp: 00:0d: iomem range 0xfeda0000-0xfedbffff could not be reserved
<6>pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
<4>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
<6>PCI: Bridge: 0000:00:1c.0
<6>  IO window: disabled.
<6>  MEM window: disabled.
<6>  PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:1c.1
<6>  IO window: disabled.
<6>  MEM window: e0000000-e00fffff
<6>  PREFETCH window: disabled.
<4>PCI: Bus 3, cardbus bridge: 0000:02:06.0
<4>  IO window: 00003000-000030ff
<4>  IO window: 00003400-000034ff
<4>  PREFETCH window: 40000000-43ffffff
<4>  MEM window: 44000000-47ffffff
<6>PCI: Bridge: 0000:00:1e.0
<6>  IO window: 3000-3fff
<6>  MEM window: e0100000-e03fffff
<6>  PREFETCH window: 40000000-43ffffff
<6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<6>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
<4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 6493k freed
<6>apm: BIOS not found.
<6>audit: initializing netlink socket (disabled)
<5>audit(1190130987.657:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<7>SELinux:  Registering netfilter hooks
<4>ksign: Installing public key data
<4>Loading keyring
<4>- Added public key C3680E46D35DB7E1
<4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.0:pcie00]
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.1:pcie00]
<4>ACPI: Transitioning device [C3B9] to D3
<4>ACPI: Transitioning device [C3B9] to D3
<6>ACPI: Fan [C3B9] (off)
<4>ACPI: Transitioning device [C3BA] to D3
<4>ACPI: Transitioning device [C3BA] to D3
<6>ACPI: Fan [C3BA] (off)
<4>ACPI: Transitioning device [C3BB] to D3
<4>ACPI: Transitioning device [C3BB] to D3
<6>ACPI: Fan [C3BB] (off)
<4>ACPI: Transitioning device [C3BC] to D3
<4>ACPI: Transitioning device [C3BC] to D3
<6>ACPI: Fan [C3BC] (off)
<4>ACPI: Transitioning device [C3BD] to D3
<4>ACPI: Transitioning device [C3BD] to D3
<6>ACPI: Fan [C3BD] (off)
<4>ACPI: SSDT 3E7DB3CF, 01FB (r1 HP      Cpu0Ist     3000 INTL 20060317)
<4>ACPI: SSDT 3E7DB64F, 04BA (r1 HP      Cpu0Cst     3001 INTL 20060317)
<7>Monitor-Mwait will be used to enter C-1 state
<7>Monitor-Mwait will be used to enter C-2 state
<7>Monitor-Mwait will be used to enter C-3 state
<6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
<6>ACPI: Processor [CPU0] (supports 8 throttling states)
<4>ACPI: SSDT 3E7DB307, 00C8 (r1 HP      Cpu1Ist     3000 INTL 20060317)
<4>ACPI: SSDT 3E7DB5CA, 0085 (r1 HP      Cpu1Cst     3000 INTL 20060317)
<6>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
<6>ACPI: Processor [CPU1] (supports 8 throttling states)
<6>Time: hpet clocksource has been installed.
<6>ACPI: Thermal Zone [TZ0] (54 C)
<6>ACPI: Thermal Zone [TZ1] (57 C)
<6>ACPI: Thermal Zone [TZ3] (45 C)
<6>ACPI: Thermal Zone [TZ4] (30 C)
<6>ACPI: Thermal Zone [TZ5] (30 C)
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<7>hpet_resources: 0xfed00000 is busy
<6>Non-volatile memory driver v1.2
<6>Linux agpgart interface v0.102 (c) Dave Jones
<6>agpgart: Detected an Intel 965GM Chipset.
<6>agpgart: Detected 7676K stolen memory.
<6>agpgart: AGP aperture is 256M @ 0xd0000000
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 16 (level, low) -> IRQ 16
<6>0000:00:03.3: ttyS0 at I/O 0x2040 (irq = 16) is a 16550A
<4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
<6>input: Macintosh mouse button emulation as /class/input/input0
<6>Yenta: CardBus bridge found at 0000:02:06.0 [103c:30c9]
<6>Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
<6>Socket status: 30000006
<6>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
<6>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
<6>cs: IO port probe 0x3000-0x3fff: clean.
<6>pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe03fffff
<6>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
<6>usbcore: registered new interface driver libusual
<6>usbcore: registered new interface driver hiddev
<6>usbcore: registered new interface driver usbhid
<6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
<6>PNP: PS/2 Controller [PNP0303:C29A,PNP0f13:C29B] at 0x60,0x64 irq 1,12
<6>i8042.c: Detected active multiplexing controller, rev 1.1.
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
<6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>TCP bic registered
<6>Initializing XFRM netlink socket
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<4>Using IPI No-Shortcut mode
<4>  Magic number: 7:851:942
<4>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>Freeing unused kernel memory: 236k freed
<4>Write protecting the kernel read-only data: 803k
<3>synaptics reset failed
<3>synaptics reset failed
<3>synaptics reset failed
<6>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
<6>input: SynPS/2 Synaptics TouchPad as /class/input/input1
<6>input: AT Translated Set 2 keyboard as /class/input/input2
<6>input: PS/2 Generic Mouse as /class/input/input3
<6>loop: loaded (max 8 devices)
<6>Floppy drive(s): fd0 is 1.44M
<4>Clocksource tsc unstable (delta = -363578371 ns)
<4>floppy0: no floppy controllers found
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<6>input: PC Speaker as /class/input/input4
<6>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
<6>NET: Registered protocol family 10
<6>lo: Disabled Privacy Extensions
<6>Mobile IPv6
<5>SCSI subsystem initialized
<6>Loading iSCSI transport class v2.0-724.
<5>iscsi: registered transport (tcp)
<6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
<6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
<6>ehci_hcd 0000:00:1a.7: debug port 1
<7>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
<6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0641000
<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 4 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
<6>ehci_hcd 0000:00:1d.7: debug port 1
<7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
<6>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe0648000
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 6 ports detected
<6>USB Universal Host Controller Interface driver v3.0
<6>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 19 (level, low) -> IRQ 20
<7>PCI: Setting latency timer of device 0000:00:1a.0 to 64
<6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
<6>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002080
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
<7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
<6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:1a.1: irq 17, io base 0x000020a0
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:1d.0: irq 19, io base 0x000020c0
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 2 ports detected
<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 21
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
<6>uhci_hcd 0000:00:1d.1: irq 21, io base 0x000020e0
<6>usb usb6: configuration #1 chosen from 1 choice
<6>hub 6-0:1.0: USB hub found
<6>hub 6-0:1.0: 2 ports detected
<6>usb 3-1: new full speed USB device using uhci_hcd and address 2
<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
<6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002100
<6>usb usb7: configuration #1 chosen from 1 choice
<6>hub 7-0:1.0: USB hub found
<6>hub 7-0:1.0: 2 ports detected
<6>usb 3-1: configuration #1 chosen from 1 choice
<6>usb 5-2: new full speed USB device using uhci_hcd and address 2
<6>usb 5-2: configuration #1 chosen from 1 choice
<6>ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 20
<5>fw_ohci: Added fw-ohci device 0000:02:06.1, OHCI version 1.10
<5>fw_core: created new fw device fw0 (0 config rom retries)
<6>cs: IO port probe 0x100-0x3af: clean.
<6>Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI
<6>Copyright (c) 1999-2007 Intel Corporation.
<6>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 22 (level, low) -> IRQ 21
<7>PCI: Setting latency timer of device 0000:00:19.0 to 64
<6>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1b:24:1b:b4:10
<6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
<6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>Unable to identify CD-ROM format.
<4>VFS: Can't find an ext2 filesystem on dev loop0.
<7>security:  3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats
<7>security:  60 classes, 65638 rules
<7>SELinux:  Completing initialization.
<7>SELinux:  Setting up existing superblocks.
<7>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
<7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
<7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
<7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
<7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
<7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
<7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
<7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
<7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
<7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
<7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>audit(1190131023.178:2): policy loaded auid=4294967295
<6>md: raid0 personality registered for level 0
<6>md: raid1 personality registered for level 1
<6>raid5: automatically using best checksumming function: pIII_sse
<4>   pIII_sse  :  4292.000 MB/sec
<4>raid5: using function: pIII_sse (4292.000 MB/sec)
<4>raid6: int32x1    433 MB/s
<4>raid6: int32x2    484 MB/s
<4>raid6: int32x4    449 MB/s
<4>raid6: int32x8    398 MB/s
<4>raid6: mmxx1     1539 MB/s
<4>raid6: mmxx2     1714 MB/s
<4>raid6: sse1x1    1046 MB/s
<4>raid6: sse1x2    1355 MB/s
<4>raid6: sse2x1    1925 MB/s
<4>raid6: sse2x2    2128 MB/s
<4>raid6: using algorithm sse2x2 (2128 MB/s)
<6>md: raid6 personality registered for level 6
<6>md: raid5 personality registered for level 5
<6>md: raid4 personality registered for level 4
<6>md: raid10 personality registered for level 10
<4>GFS2 (built May 23 2007 22:13:32) installed
<6>Lock_Nolock (built May 23 2007 22:13:44) installed
<6>JFS: nTxBlock = 7894, nTxLock = 63153
<6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
<6>SGI XFS Quota Management subsystem
<6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
<6>device-mapper: multipath: version 1.0.5 loaded
<6>device-mapper: multipath round-robin: version 1.0.0 loaded
<6>device-mapper: multipath emc: version 0.0.3 loaded
<5>audit(1190131027.178:3): audit_pid=786 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0