<br><br><div class="gmail_quote">2008/2/22 Mikkel L. Ellertson <<a href="mailto:mikkel@infinity-ltd.com">mikkel@infinity-ltd.com</a>>:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div><div></div><div class="Wj3C7c">max bianco wrote:<br>
> Can someone point me to a good modem how to? I am trying to setup a<br>
> dial-in server and I cannot detect my modem but it is listed in lspci.<br>
> When i run wvdialconf i get no modem detected. I have tried several<br>
> different modems, lspci lists them but my configuration is obviously<br>
> lacking somewhere, i have used the setserial command but apparently not<br>
> correctly. i have read and followed several how to's but none by itself<br>
> seems complete. Can anyone help by pointing me to a good source for<br>
> modem config on  Redhat and clones. I know not all modems are compatible<br>
> so a suggestion for an internal modem that is know to work is also<br>
> welcome. I have a lot of old internal modems lying around so one is<br>
> bound to be compatible. I have tried conextant, agere, ESS, and<br>
> smartlink internal modems. From what I understand I'd have better luck<br>
> with an external modem but I don't have one lying around so.....<br>
><br>
> Thanks,<br>
><br>
> Max<br>
><br>
</div></div>Let me make sure I understand what you are trying to do. If I am<br>
reading things right, you want people to be able to dial into your<br>
machine, and log in (or make a ppp connection). If this is the case,<br>
you need to configure mgetty for the ports you want. You then need<br>
to create entries for each line in /etc/inittab. They used to<br>
include examples in inittab, but they do not any more. There are<br>
examples in the inittab man page. There is also a fair amount of<br>
documentation included in the gmetty package.<br>
</blockquote><div><br>Yes I want to be able to dial in and access the network. However I am having  trouble dialing out from my f8 box as it does not detect the modem. The dial-in server is centos actually but it has the same problem, it cannot detect the modem that is installed. So I figure these as my first two hurdles, getting both boxes to recognize that they have modems then setting up the stuff you suggest with mgetty or do i have to configure mgetty to get my modem recognized in the first place? The mgetty config would only be needed on the machine i dial in to right?<br>
<br>Thanks, <br><br>Max<br></div></div><br>