Linux neo 2.6.24.3-12.fc8 #1 SMP Tue Feb 26 14:58:29 EST 2008 i686 i686 i386 GNU/Linux Initializing cgroup subsys cpuset Linux version 2.6.24.3-12.fc8 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Feb 26 14:58:29 EST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001eff0000 (usable) BIOS-e820: 000000001eff0000 - 000000001effffc0 (ACPI data) BIOS-e820: 000000001effffc0 - 000000001f000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 495MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 126960) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 126960 HighMem 126960 -> 126960 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 126960 On node 0 totalpages: 126960 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 959 pages used for memmap Normal zone: 121905 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap DMI 2.3 present. Using APIC driver default ACPI: RSDP 000E5010, 0014 (r0 OID_00) ACPI: RSDT 1EFFFBC0, 0030 (r1 INSYDE RSDT_000 1 & 10007) ACPI: FACP 1EFFFAC0, 0084 (r3 INSYDE FACP_000 100 & 10007) ACPI: DSDT 1EFFB5C0, 44FA (r1 INSYDE VT8603 1000 INTL 2002025) ACPI: FACS 1EFFFFC0, 0040 ACPI: BOOT 1EFFFB50, 0028 (r1 INSYDE SYS_BOOT 100 & 10007) ACPI: DBGP 1EFFFB80, 0034 (r1 INSYDE DBGP_000 1 & 10007) ACPI: DMI detected: Hewlett-Packard ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 20000000 (gap: 1f000000:e0f80000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125969 Kernel command line: ro root=LABEL=/1 rhgb quiet Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffb000 (013ed000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07ba000 soft=c079a000 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1133.188 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 495268k/507840k available (2238k kernel code, 11904k reserved, 1131k data, 284k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xdf800000 - 0xff7fe000 ( 511 MB) lowmem : 0xc0000000 - 0xdeff0000 ( 495 MB) .init : 0xc0750000 - 0xc0797000 ( 284 kB) .data : 0xc062fa09 - 0xc074a724 (1131 kB) .text : 0xc0400000 - 0xc062fa09 (2238 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 2267.68 BogoMIPS (lpj=1133843) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0c00) CPU0: Intel(R) Pentium(R) III Mobile CPU 1133MHz stepping 01 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=1680 bytes CPU0 attaching sched-domain: domain 0: span 00000001 groups: 00000001 net_namespace: 64 bytes Booting paravirtualized kernel on bare hardware Time: 11:13:35 Date: 03/08/08 NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xe8a74, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 9 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered PCI: setting IRQ 13 as level-triggered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Time: tsc clocksource has been installed. system 00:03: iomem range 0xfff80000-0xffffffff could not be reserved system 00:05: ioport range 0x4d0-0x4d1 has been reserved system 00:05: ioport range 0x3f0-0x3f1 has been reserved system 00:05: ioport range 0x1000-0x107f has been reserved system 00:05: ioport range 0x1400-0x147f has been reserved system 00:05: ioport range 0x1600-0x167f has been reserved PCI: Bridge: 0000:00:01.0 IO window: c000-dfff MEM window: e0000000-efffffff PREFETCH window: 90000000-9fffffff PCI: Bus 2, cardbus bridge: 0000:00:04.0 IO window: 00001800-000018ff IO window: 00001c00-00001cff PREFETCH window: 20000000-23ffffff MEM window: 24000000-27ffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs... it is Switched to high resolution mode on CPU 0 Freeing initrd memory: 2975k freed Simple Boot Flag at 0x37 set to 0x1 cpufreq: change failed with new_state 2 and result 0 cpufreq: change failed with new_state 2 and result 0 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1204974817.226:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key FF572035AA99318 - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: VIA PCI bridge detected. Disabling DAC. Boot video device is 0000:01:00.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Thermal Zone [THRM] (59 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart: Detected VIA ProSavage PM133/PL133/PN133 chipset agpgart: AGP aperture is 64M @ 0xa0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /devices/virtual/input/input0 Yenta: CardBus bridge found at 0000:00:04.0 [103c:0020] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.0, mfunc 0x018c1882, devctl 0x44 Yenta: ISA IRQ mask 0x0000, PCI irq 11 Socket status: 30000006 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 0:913:225 Freeing unused kernel memory: 284k freed Write protecting the kernel read-only data: 894k Marking TSC unstable due to: TSC halts in idle. Time: acpi_pm clocksource has been installed. Synaptics Touchpad, model: 1, fw: 5.8, id: 0x2348b3, caps: 0x904713/0x10008 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input2 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:11.2: UHCI Host Controller uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:11.2: irq 10, io base 0x00001200 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:11.3: UHCI Host Controller uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:11.3: irq 10, io base 0x00001300 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. pata_via 0000:00:11.1: version 0.3.3 scsi0 : pata_via scsi1 : pata_via ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 ata1.00: ATA-6: IC25N040ATMR04-0, MO2OAD4A, max UDMA/100 ata1.00: 78140160 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2.00: ATAPI: UJDA720 DVD/CDRW, 1.00, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA IC25N040ATMR04-0 MO2O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM MATSHITA UJDA720 DVD/CDRW 1.00 PQ: 0 ANSI: 5 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. audit(1204974829.833:2): enforcing=1 old_enforcing=0 auid=4294967295 SELinux:8192 avtab hash slots allocated.Num of rules:217156 SELinux:8192 avtab hash slots allocated.Num of rules:217156 security: 8 users, 12 roles, 2363 types, 114 bools, 1 sens, 1024 cats security: 67 classes, 217156 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda6, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: policy loaded with handle_unknown=allow audit(1204974831.027:3): policy loaded auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. 8139too Fast Ethernet driver 0.9.28 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:0d.0 to 64 eth0: RealTek RTL8139 at 0xdf836000, 00:02:3f:36:58:67, IRQ 10 eth0: Identified 8139 chip type 'RTL-8100' NET: Registered protocol family 23 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:0e.0 to 64 firewire_ohci: Added fw-ohci device 0000:00:0e.0, OHCI version 1.0 via-ircc: dongle probing not supported, please specify dongle_id module parameter. IrDA: Registered device irda0 (via-ircc) parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] parport_pc: VIA parallel port: io=0x378, irq=7 firewire_core: created device fw0: GUID 00023f220b00440a, S400 vt8231 0000:00:11.4: base address not set - upgrade BIOS or use force_addr=0xaddr input: Power Button (FF) as /devices/virtual/input/input3 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/virtual/input/input4 ACPI: Lid Switch [LID] input: Power Button (CM) as /devices/virtual/input/input5 ACPI: Power Button (CM) [PWBN] ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input6 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) input: PC Speaker as /devices/platform/pcspkr/input/input7 ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:11.5 to 64 SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda6, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda3, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 1012052k swap on /dev/sda5. Priority:-1 extents:1 across:1012052k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14a warning: process `kudzu' used the deprecated sysctl system call with 1.23. ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (8192 buckets, 32768 max) ip_tables: (C) 2000-2006 Netfilter Core Team RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts audit(1204971278.175:4): audit_pid=1606 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bridge firewalling registered virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. virbr0: starting userspace STP failed, starting kernel STP eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready virbr0: no IPv6 routers present [drm] Initialized drm 1.1.0 20060810 [drm] Initialized savage 2.4.1 20050313 on minor 0 mtrr: base(0x92000000) is not aligned on a size(0x5000000) boundary agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode pccard: CardBus card inserted into slot 0 yenta EnE: chaning testregister 0xC9, 44 -> 44 PCI: Enabling device 0000:02:00.0 (0000 -> 0002) ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:02:00.0 to 64 phy0: Selected rate control algorithm 'pid' Registered led device: rt61pci-phy0:radio Registered led device: rt61pci-phy0:assoc udev: renamed network interface wlan0 to wlan3 ADDRCONF(NETDEV_UP): wlan3: link is not ready eth0: link down ADDRCONF(NETDEV_UP): eth0: link is not ready BUG: unable to handle kernel NULL pointer dereference at virtual address 00000004 printing eip: dfc9d77a *pde = 1d472067 *pte = 00000000 Oops: 0000 [#1] SMP Modules linked in: arc4 ecb blkcipher rt61pci rt2x00pci rt2x00lib rfkill input_polldev mac80211 cfg80211 eeprom_93cx6 savage drm ipt_MASQUERADE iptable_nat nf_nat bridge rfcomm l2cap bluetooth sunrpc nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand acpi_cpufreq dm_mirror dm_multipath dm_mod ipv6 snd_via82xx gameport snd_ac97_codec ac97_bus snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq pcspkr joydev serio_raw snd_pcm_oss snd_mixer_oss snd_pcm video output snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi battery ac snd_seq_device button vt8231 hwmon parport_pc snd parport i2c_viapro via_ircc soundcore firewire_ohci 8139cp firewire_core i2c_core irda 8139too crc_ccitt mii crc_itu_t sr_mod sg cdrom pata_acpi ata_generic pata_via libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd Pid: 1988, comm: NetworkManager Not tainted (2.6.24.3-12.fc8 #1) EIP: 0060:[] EFLAGS: 00210202 CPU: 0 EIP is at rt61pci_init_txentry+0x20/0x82 [rt61pci] EAX: 20000000 EBX: d03b46c0 ECX: 0000001d EDX: d03b3400 ESI: 00000004 EDI: 00000014 EBP: 00000001 ESP: deb68b70 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process NetworkManager (pid: 1988, ti=deb68000 task=dde84690 task.ti=deb68000) Stack: d03b9060 de2d6750 00000014 00000001 dfc93cb9 d03b9060 00000000 d03bb480 00000000 dfc922e5 d03b9060 00000000 dfc923b6 d03bb000 d03b8180 dfcb9e99 000040d0 00000001 c1207a00 00200246 00000001 d03bb000 00000006 d03bb15c Call Trace: [] rt2x00queue_init_tx+0x3b/0x62 [rt2x00lib] [] rt2x00lib_enable_radio+0x26/0x61 [rt2x00lib] [] rt2x00lib_start+0x96/0xa3 [rt2x00lib] [] ieee80211_open+0x1ba/0x3df [mac80211] [] dev_open+0x42/0x77 [] dev_change_flags+0x9d/0x149 [] do_setlink+0x212/0x2c5 [] rtnl_setlink+0xdb/0xf7 [] rtnl_setlink+0x0/0xf7 [] rtnetlink_rcv_msg+0x19a/0x1b4 [] rtnetlink_rcv_msg+0x0/0x1b4 [] netlink_rcv_skb+0x2d/0x7e [] rtnetlink_rcv+0x14/0x1a [] netlink_unicast+0x19c/0x1f7 [] copy_from_user+0x32/0x5e [] netlink_sendmsg+0x27c/0x288 [] sock_sendmsg+0xc9/0xe4 [] autoremove_wake_function+0x0/0x35 [] autoremove_wake_function+0x0/0x35 [] autoremove_wake_function+0x0/0x35 [] copy_from_user+0x32/0x5e [] copy_from_user+0x32/0x5e [] sys_sendmsg+0x192/0x1f7 [] sys_recvmsg+0x14e/0x1d0 [] sys_sendto+0x118/0x138 [] copy_to_user+0x34/0x48 [] cp_new_stat64+0xfc/0x10e [] sched_clock+0x8/0x18 [] __update_rq_clock+0x19/0x15f [] __switch_to+0xcb/0x147 [] sys_socketcall+0x240/0x261 [] syscall_call+0x7/0xb ======================= Code: 8b 13 83 e2 fe 09 d0 89 03 5b c3 55 b8 01 00 00 00 57 b9 00 00 00 e0 56 53 8b 5a 10 0f bc c9 d3 e0 25 00 00 00 e0 8b 33 83 c6 04 <8b> 0e 81 e1 ff ff ff 1f 09 c8 b9 00 e0 00 00 89 06 b8 00 1f 00 EIP: [] rt61pci_init_txentry+0x20/0x82 [rt61pci] SS:ESP 0068:deb68b70 ---[ end trace ada021b99c612404 ]---