Anyone , Any idea ? <div class="gmail_quote">On Wed, Apr 2, 2008 at 1:06 AM, Nicolae Ghimbovschi <<a href="mailto:xfreebird@gmail.com">xfreebird@gmail.com</a>> wrote: <blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"> Hello, Starting with kernel 2.6.24.3-34.fc8 Fedora fails to boot. It works well with 2.6.23.15-137.fc8 and lower versions. The error messages are listed below: ... Loading pata_via.ko module ACPI: Unable to derive IRQ for device 0000:00:11.1 scsi0: pata_via scsi1: pata_via ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmda 0xfc00 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmda 0xfc08 irq 14 ata1.00 ATA-7: Maxtor 6Y80L0, YAR41BW0, max UDMA/133 ata1.00: 160086528 sectors, multi 16: LBA48 ata1.00: configured for UDMA/133 ata2.00: ATAPI: ASUS CRW-5232AS, 1.03, max UDMA/33 ata2.01: ATAPI: CDU5211, YYS7, max UDMA/33 ata2.00: configured for UDMA/33 ata2.01: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y80L0 YAR4 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB) sd 0:0:0:0: [sda] Write protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x24 ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1.00: status: { DRDY ERR } ata1.00: error: { ICRC ABRT } ata1: soft resetting link ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x24 ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1.00: status: { DRDY ERR } ata1.00: error: { ICRC ABRT } ata1: soft resetting link ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: limiting speed to UDMA/100:PI04 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x24 ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1.00: status: { DRDY ERR } ata1.00: error: { ICRC ABRT } ata1: soft resetting link ata1.00: configured for UDMA/100 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x24 ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in res 51/84:00:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1.00: status: { DRDY ERR } ata1.00: error: { ICRC ABRT } ata1: soft resetting link ata1.00: configured for UDMA/100 sd 0:0:0:0 [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 0:0:0:0 [sda] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptor (in hex): 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 00 00 sd 0:0:0: [sda] Add. Sense: Scsi parity error end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 ata1: EH complete ..... Dev sda: unable to read RDB block 0 unable to read partition table ..... Unable to access resume device (LABEL=SWAP-sda3) mount: could not find filesystem '/dev/root' setuproot: moving /dev/failed: No such file or directory setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory switchroot: mount failed: No such file or directory Boot has failed. ******************************************************************* My system: 00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) Kernel driver in use: pata_via Kernel modules: pata_via /dev/sda: ATA device, with non-removable media Model Number: Maxtor 6Y080L0 Serial Number: Y26DPFZE Firmware Revision: YAR41BW0 Standards: Used: ATA/ATAPI-7 T13 1532D revision 0 Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 4047 heads 16 16 sectors/track 63 255 -- CHS current addressable sectors: 16511760 LBA user addressable sectors: 160086528 LBA48 user addressable sectors: 160086528 device size with M = 1024*1024: 78167 MBytes device size with M = 1000*1000: 81964 MBytes (81 GB) Capabilities: LBA, IORDY(can be disabled) Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: unknown setting (0x0000) Recommended acoustic management value: 192, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_VERIFY command * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE Advanced Power Management feature set SET_MAX security extension * Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count not supported: enhanced erase HW reset results: CBLID- above Vih Device num = 0 determined by the jumper Checksum: correct *********************************************************** dmesg from the working kernel : Linux version 2.6.23.15-137.fc8 (<a href="mailto:mockbuild@xenbuilder2.fedora.redhat.com" target="_blank">mockbuild@xenbuilder2.fedora.redhat.com</a>) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Sun Feb 10 17:48:34 EST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. found SMP MP-table at 000fb820 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 131056) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 131056 HighMem 131056 -> 131056 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 131056 On node 0 totalpages: 131056 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 991 pages used for memmap Normal zone: 125969 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap DMI 2.3 present. Using APIC driver default ACPI: RSDP 000FA4A0, 0014 (r0 AMI ) ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7 10 MSFT 97) ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7 11 MSFT 97) ACPI: DSDT 1FFF0120, 30F2 (r1 VIA VIA_K7 1000 MSFT 100000D) ACPI: FACS 1FFF8000, 0040 ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7 9 MSFT 97) ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 130033 Kernel command line: ro root=LABEL=/1 rhgb quiet mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07a9000 soft=c0789000 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1666.449 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 511596k/524224k available (2187k kernel code, 11944k reserved, 1118k data, 280k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) .init : 0xc0740000 - 0xc0786000 ( 280 kB) .data : 0xc0622d15 - 0xc073a544 (1118 kB) .text : 0xc0400000 - 0xc0622d15 (2187 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 3335.44 BogoMIPS (lpj=1667720) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383f3ff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed ACPI: Core revision 20070126 CPU0: AMD Athlon(tm) XP 2000+ stepping 01 Total of 1 processors activated (3335.44 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=180 bytes sizeof(task_struct)=1552 bytes Booting paravirtualized kernel on bare hardware Time: 0:19:32 Date: 04/02/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 0800-087f claimed by vt8235 PM PCI quirk: region 0400-040f claimed by vt8235 SMB ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Time: tsc clocksource has been installed. pnp: 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: dde00000-dfefffff PREFETCH window: cdd00000-ddcfffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 196608 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2963k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1207095572.455:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 433CDEB37FB53040 - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: VIA PCI bridge detected. Disabling DAC. Boot video device is 0000:01:00.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU1] (supports 16 throttling states) isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 agpgart: Detected VIA KM400/KM400A chipset agpgart: AGP aperture is 64M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Processor cpuid 681 not supported Using IPI No-Shortcut mode Magic number: 4:403:303 hash matches device tty32 Freeing unused kernel memory: 280k freed Write protecting the kernel read-only data: 850k input: GenPS/2 Genius Mouse as /class/input/input2 ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 16 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.3: irq 16, io mem 0xdffff700 ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 16 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 16, io base 0x0000e000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 16 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 16, io base 0x0000e400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 16 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 16, io base 0x0000e800 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected SCSI subsystem initialized libata version 2.21 loaded. pata_via 0000:00:11.1: version 0.3.2 ACPI: Unable to derive IRQ for device 0000:00:11.1 scsi0 : pata_via scsi1 : pata_via ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14 ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15 usb 2-2: new full speed USB device using uhci_hcd and address 2 ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 ata1.00: 160086528 sectors, multi 16: LBA48 ata1.00: limited to UDMA/33 due to 40-wire cable ata1.00: configured for UDMA/33 usb 2-2: configuration #1 chosen from 1 choice ata2.00: ATAPI: ASUS CRW-5232AS, 1.03, max UDMA/33 ata2.01: ATAPI: CDU5211, YYS7, max UDMA/33 ata2.00: configured for UDMA/33 ata2.01: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM ASUS CRW-5232AS 1.03 PQ: 0 ANSI: 5 scsi 1:0:1:0: CD-ROM SONY CD-ROM CDU5211 YYS7 PQ: 0 ANSI: 5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1207095578.532:2): selinux=0 auid=4294967295 sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray sr 1:0:1:0: Attached scsi CD-ROM sr1 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sr 1:0:1:0: Attached scsi generic sg2 type 5 usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC302 usbcore: registered new interface driver usblp input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /class/input/input5 ACPI: Sleep Button (CM) [SLPB] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 17 eth0: VIA Rhine II at 0xdffff600, 00:30:1b:2b:a1:c1, IRQ 17. eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. input: PC Speaker as /class/input/input6 NET: Registered protocol family 23 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 nvidia: module license 'NVIDIA' taints kernel. parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18 NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.05 Tue Jan 22 19:36:58 PST 2008 ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:11.5 to 64 NET: Registered protocol family 10 lo: Disabled Privacy Extensions agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: BIOS bug. AGP bridge claims to only support x4 rateFixing up support for x2 & x1 agpgart: Device is in legacy mode, falling back to 2.x agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: <a href="mailto:dm-devel@redhat.com" target="_blank">dm-devel@redhat.com</a> device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda2, internal journal Adding 1020116k swap on /dev/sda3. Priority:-1 extents:1 across:1020116k ip6_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 32768 max) ip_tables: (C) 2000-2006 Netfilter Core Team eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 fuse init (API version 7.8) audit(1207084803.854:3): audit_pid=1749 old=0 by auid=4294967295 Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 eth0: no IPv6 routers present agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: BIOS bug. AGP bridge claims to only support x4 rateFixing up support for x2 & x1 agpgart: Device is in legacy mode, falling back to 2.x agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 ISO 9660 Extensions: Microsoft Joliet Level 1 ISOFS: changing to secondary root eth0: no IPv6 routers present -- Be the change you want to see in the world ! </blockquote></div> -- Be the change you want to see in the world !