<p></p><p>Hello</p><p>On a linux box, I use an added card to provide sata
connexions. This card is an ALI card, the M5281 Serial
ATA.</p><p>On this card, I connected a 500Go hard disk sata II with no problem:
the disk is recognize, no errors in the messages log file. hdparm -tT works well
with this hard disk</p><p>on this card, on the second port, I connected a 1To
hard disk: WDC 10EACS. the disk is recognized well but a lot of errors are
written on the messages log file when I try to write a large file (36M) or to do
simply a hdparm -tT on this device. The problem is the same with FC7/ FC8 and
FC9.</p><p># cat /proc/version <br />Linux version 2.6.25-14.fc9.i686
(mockbuild@)
(gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Thu May 1
06:28:41 EDT 2008<br />cat /etc/redhat-release <br />Fedora release 9
(Sulphur)</p><p></p><p>The error generated are :</p><p>kernel: ata3.00:
exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x2<br /> kernel: ata3.00:
(BMDMA stat 0x85)<br /> kernel: ata3.00: cmd c8/00:f8:08:0e:00/00:00:00:00:00/e0
tag 0 cdb 0x0 data 126976 in <br /> kernel:          res
51/84:57:a9:0e:00/84:00:00:00:00/e0 Emask 0x10 (ATA bus error)<br /> kernel:
ata3: soft resetting port<br /> kernel: ata3: SATA link up 1.5 Gbps (SStatus 113
SControl 300)<br /> kernel: ata3.00: ata_hpa_resize 1: sectors = 1953525168,
hpa_sectors = 1953525168<br /> kernel: ata3.00: ata_hpa_resize 1: sectors =
1953525168, hpa_sectors = 1953525168<br /> kernel: ata3.00: configured for
UDMA/33 <br /> kernel: ata3: EH complete<br /> kernel: sd 2:0:0:0: [sdc]
1953525168 512-byte hardware sectors (1000205 MB)<br /> kernel: sd 2:0:0:0:
[sdc] Write Protect is off<br /> kernel: sd 2:0:0:0: [sdc] Write cache: enabled,
read cache: enabled, doesn't support DPO or FUA<br /> kernel: ata3.00: exception
Emask 0x0 SAct 0x0 SErr 0x280000 action 0x2<br /> kernel: ata3.00: (BMDMA stat
0x85)<br /> kernel: ata3.00: cmd c8/00:70:00:0f:00/00:00:00:00:00/e0 tag 0 cdb
0x0 data 57344 in<br /> kernel:          res 51/84:5f:11:0f:00/84:00:00:00:00/e0
Emask 0x10 (ATA bus error)<br /> kernel: ata3: soft resetting port<br /> kernel:
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)<br /> kernel: ata3.00:
ata_hpa_resize 1: sectors = 1953525168, hpa_sectors = 1953525168<br /> kernel:
ata3.00: ata_hpa_resize 1: sectors = 1953525168, hpa_sectors = 1953525168<br />
kernel: ata3.00: configured for UDMA/33 <br /> kernel: ata3: EH complete<br />
kernel: sd 2:0:0:0: [sdc] 1953525168 512-byte hardware sectors (1000205 MB)<br
/> kernel: sd 2:0:0:0: [sdc] Write Protect is off<br /> kernel: sd 2:0:0:0:
[sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or
FUA</p><p>The problem is the same if I have only one partition (1To ext3) or two
500go ext3 .</p><p><br />Is there a problem with my WD hard disk ? or is it a
problem with 1To hard disk sata III ?</p><p>what about 1 To hard disk and Fedora
?</p><p>Thanks in advance for your help </p><p>Cheers</p><p>Jean-Philippe
Battu</p>