X.Org X Server 1.6.1.901 (1.6.2 RC 1) Release Date: 2009-5-8 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.18-128.1.6.el5 i686 Current Operating System: Linux ryuk 2.6.29.5-191.fc11.i686.PAE #1 SMP Tue Jun 16 23:19:53 EDT 2009 i686 Kernel command line: ro vga=791 root=LABEL=/SYS Build Date: 18 May 2009 02:47:59PM Build ID: xorg-x11-server 1.6.1.901-1.fc11 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 29 21:25:24 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (==) Automatically adding devices (==) Automatically enabling devices (**) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins, catalogue:/etc/X11/fontpath.d, built-ins (**) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Mouse0 (WW) Disabling Keyboard0 (II) Loader magic: 0x640 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0@1:0:0) Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter rev 0, Mem @ 0xe8000000/134217728, 0xe2100000/131072, I/O @ 0x00009000/128, BIOS @ 0x????????/131072 (II) No APM support in BIOS or kernel (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded by default. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "sis" (II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so (II) Module sis: vendor="X.Org Foundation" compiled for 1.6.0, module version = 0.10.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620, SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H, SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre), SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX], SIS340 (II) SIS: driver for XGI chipsets: Volari Z7 (XG20), Volari V3XT/V5/V8/Duo (XG40) (II) Primary Device is: PCI 01@00:00:0 (WW) Falling back to old probe method for sis (WW) SIS: No matching Device section for instance (BusID PCI:0@0:0:0) found (WW) SIS: No matching Device section for instance (BusID PCI:0@0:1:0) found (WW) SIS: No matching Device section for instance (BusID PCI:0@0:2:0) found (--) Chipset SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX] found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.6.0.0) (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer and others (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml (II) SIS(0): *** for documentation and updates. (--) SIS(0): sisfb not found (--) SIS(0): Relocated I/O registers at 0x9000 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (**) SIS(0): Depth 16, (--) framebuffer bpp 16 (==) SIS(0): RGB weight 565 (==) SIS(0): Default visual is TrueColor (WW) SIS(0): Could not find/read video BIOS (==) SIS(0): Using XAA acceleration architecture (==) SIS(0): Using HW cursor (==) SIS(0): Color HW cursor is enabled (II) SIS(0): Using VRAM command queue, size 512k (==) SIS(0): Hotkey display switching is enabled (II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless (II) SIS(0): whether enabled or disabled. This is no driver bug. (==) SIS(0): SiSCtrl utility interface is disabled (II) SIS(0): For information on SiSCtrl, see http://www.winischhofer.at/linuxsispart1.shtml#sisctrl (==) SIS(0): DRI disabled (II) SIS(0): Checking OS for SSE support is not supported in this version of X.org (II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on". (--) SIS(0): DIMM0 is DDR SDRAM (--) SIS(0): DIMM1 is not installed (--) SIS(0): DIMM2 is not installed (--) SIS(0): DRAM type: DDR SDRAM (--) SIS(0): Memory clock: 332.892 MHz (--) SIS(0): DRAM bus width: 64 bit (--) SIS(0): Linear framebuffer at 0xE8000000 (--) SIS(0): MMIO registers at 0xE2100000 (size 64K) (--) SIS(0): VideoRAM: 32768 KB (II) SIS(0): Using 32192K of framebuffer memory at offset 0K (--) SIS(0): Hardware supports two video overlays (--) SIS(0): Detected SiS302LV video bridge (Charter/UMC-1, ID 1; Rev 0xe1) (--) SIS(0): No CRT1/VGA detected (--) SIS(0): Detected LCD/plasma panel (1280x800, 11, non-exp., RGB18 [6cc108]) (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0) (II) SIS(0): CRT1 gamma correction is enabled (II) SIS(0): Separate Xv gamma correction for CRT1 is disabled (II) SIS(0): CRT2 gamma correction is enabled (--) SIS(0): Memory bandwidth at 16 bpp is 1331.57 MHz (--) SIS(0): Detected LCD PanelDelayCompensation 0x00 (for LCD=CRT2) (--) SIS(0): Detected LCD PanelDelayCompensation1 0x00 (for LCD=CRT1) (--) SIS(0): 302LV/302ELV: Using EMI 0x600d703f (LCD) (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (--) SIS(0): CRT2 DDC probing failed (==) SIS(0): Min pixel clock is 10 MHz (--) SIS(0): Max pixel clock is 400 MHz (II) SIS(0): Replaced entire mode list with built-in modes (II) SIS(0): Correcting missing CRT2 monitor HSync range (II) SIS(0): Correcting missing CRT2 monitor VRefresh range (II) SIS(0): "Unknown reason" in the following list means that the mode (II) SIS(0): is not supported on the chipset/bridge/current output device. (II) SIS(0): Monitor0: Using hsync range of 30.00-80.00 kHz (II) SIS(0): Monitor0: Using vrefresh range of 59.00-61.00 Hz (II) SIS(0): Monitor0: Using vrefresh value of 71.00 Hz (II) SIS(0): Clock range: 10.00 to 400.00 MHz (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (vrefresh out of range) (II) SIS(0): Not using default mode "800x600" (hsync out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (vrefresh out of range) (II) SIS(0): Not using default mode "640x480" (hsync out of range) (II) SIS(0): Not using default mode "640x480" (hsync out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x768" (hsync out of range) (II) SIS(0): Not using default mode "1024x768" (hsync out of range) (II) SIS(0): Not using default mode "1280x1024" (unknown reason) (II) SIS(0): Not using default mode "1280x1024" (unknown reason) (II) SIS(0): Not using default mode "1280x1024" (unknown reason) (II) SIS(0): Not using default mode "1280x1024" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1600x1200" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "1920x1440" (unknown reason) (II) SIS(0): Not using default mode "2048x1536" (unknown reason) (II) SIS(0): Not using default mode "2048x1536" (unknown reason) (II) SIS(0): Not using default mode "2048x1536" (unknown reason) (II) SIS(0): Not using default mode "2048x1536" (unknown reason) (II) SIS(0): Not using default mode "2048x1536" (unknown reason) (II) SIS(0): Not using default mode "800x480" (vrefresh out of range) (II) SIS(0): Not using default mode "800x480" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x576" (vrefresh out of range) (II) SIS(0): Not using default mode "1024x576" (vrefresh out of range) (II) SIS(0): Not using default mode "1280x720" (vrefresh out of range) (II) SIS(0): Not using default mode "1280x720" (hsync out of range) (II) SIS(0): Not using default mode "1280x960" (unknown reason) (II) SIS(0): Not using default mode "1280x960" (unknown reason) (II) SIS(0): Not using default mode "1280x768" (vrefresh out of range) (II) SIS(0): Not using default mode "1280x768" (hsync out of range) (II) SIS(0): Not using default mode "1400x1050" (unknown reason) (II) SIS(0): Not using default mode "1400x1050" (unknown reason) (II) SIS(0): Not using default mode "1152x864" (unknown reason) (II) SIS(0): Not using default mode "1152x864" (unknown reason) (II) SIS(0): Not using default mode "1152x864" (unknown reason) (II) SIS(0): Not using default mode "848x480" (vrefresh out of range) (II) SIS(0): Not using default mode "856x480" (vrefresh out of range) (II) SIS(0): Not using default mode "1360x768" (unknown reason) (II) SIS(0): Not using default mode "1280x800" (vrefresh out of range) (II) SIS(0): Not using default mode "1280x800" (hsync out of range) (II) SIS(0): Not using default mode "1680x1050" (unknown reason) (II) SIS(0): Not using default mode "1920x1080" (unknown reason) (II) SIS(0): Not using default mode "1280x854" (unknown reason) (II) SIS(0): Not using default mode "1280x854" (unknown reason) (II) SIS(0): Not using default mode "1280x854" (unknown reason) (--) SIS(0): Virtual size is 1280x800 (pitch 1280) (**) SIS(0): *Default mode "1280x800" (1280x800) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz) (**) SIS(0): *Default mode "1024x768" (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz) (**) SIS(0): Default mode "1280x768" (1280x768) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz) (**) SIS(0): Default mode "1280x720" (1280x720) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz) (**) SIS(0): Default mode "1024x576" (1024x576) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz) (**) SIS(0): Default mode "960x600" (960x600) (For CRT device: 41.5 MHz, 37.1 kHz, 60.0 Hz) (**) SIS(0): Default mode "960x540" (960x540) (For CRT device: 37.3 MHz, 33.8 kHz, 60.0 Hz) (**) SIS(0): Default mode "800x600" (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz) (**) SIS(0): Default mode "768x576" (768x576) (For CRT device: 35.0 MHz, 35.9 kHz, 60.1 Hz) (**) SIS(0): Default mode "720x576" (720x576) (For CRT device: 32.7 MHz, 35.9 kHz, 60.1 Hz) (**) SIS(0): Default mode "856x480" (856x480) (For CRT device: 33.9 MHz, 31.7 kHz, 59.8 Hz) (**) SIS(0): Default mode "848x480" (848x480) (For CRT device: 33.7 MHz, 31.0 kHz, 60.0 Hz) (**) SIS(0): Default mode "800x480" (800x480) (For CRT device: 39.8 MHz, 37.7 kHz, 60.0 Hz) (**) SIS(0): Default mode "720x480" (720x480) (For CRT device: 28.3 MHz, 31.6 kHz, 61.0 Hz) (**) SIS(0): Default mode "640x480" (640x480) (For CRT device: 25.1 MHz, 31.3 kHz, 59.7 Hz) (**) SIS(0): Default mode "640x400" (640x400) (For CRT device: 25.1 MHz, 31.6 kHz, 71.6 Hz) (**) SIS(0): Default mode "512x384" (512x384) (For CRT device: 32.6 MHz, 48.5 kHz, 60.1 Hz (D)) (**) SIS(0): Default mode "400x300" (400x300) (For CRT device: 20.0 MHz, 37.9 kHz, 60.3 Hz (D)) (**) SIS(0): Default mode "320x240" (320x240) (For CRT device: 12.5 MHz, 31.3 kHz, 60.7 Hz (D)) (**) SIS(0): Default mode "320x200" (320x200) (For CRT device: 12.5 MHz, 31.3 kHz, 70.9 Hz (D)) (==) SIS(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.2.1 ABI class: X.Org Video Driver, version 5.0 (II) SIS(0): 2D acceleration enabled (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) SIS(0): initializing int10 (II) SIS(0): Primary V_BIOS segment is: 0xc000 (II) SIS(0): VESA BIOS detected (II) SIS(0): VESA VBE Version 3.0 (II) SIS(0): VESA VBE Total Mem: 16384 kB (II) SIS(0): VESA VBE OEM: SiS (II) SIS(0): VESA VBE OEM Software Rev: 1.0 (II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp. (II) SIS(0): VESA VBE OEM Product: 6330 (II) SIS(0): VESA VBE OEM Product Rev: 2.24.4a (II) SIS(0): Setting standard mode 0x15 (II) SIS(0): RENDER acceleration enabled (II) SIS(0): Framebuffer from (0,0) to (1279,12874) (II) SIS(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles 8x8 color pattern filled rectangles Solid Lines Dashed Lines Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots 32 8x8 color pattern slots (--) SIS(0): CPU frequency 1399.97Mhz (II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods: (--) SIS(0): Checked libc memcpy()... 19.9 MiB/s (--) SIS(0): Checked built-in-1 memcpy()... 19.9 MiB/s (--) SIS(0): Checked built-in-2 memcpy()... 16.7 MiB/s (--) SIS(0): Checked MMX memcpy()... 39.7 MiB/s (--) SIS(0): Checked MMX2 memcpy()... 39.9 MiB/s (--) SIS(0): Using MMX2 method for aligned data transfers to video RAM (--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM (==) SIS(0): Backing store disabled (==) SIS(0): Silken mouse enabled (II) SIS(0): DPMS enabled (II) SIS(0): Using SiS300/315/330/340 series HW Xv (II) SIS(0): Default Xv adaptor is Video Overlay (II) SIS(0): Initialized SISCTRL extension version 0.1 (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1 (==) RandR enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: Screen 0 is not DRI2 capable (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) config/hal: Adding input device AT Translated Set 2 keyboard (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.1, module version = 2.2.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event5" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105+inet" (**) Option "xkb_layout" "us" (**) Option "xkb_options" "terminate:ctrl_alt_bksp" (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event4" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00 (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms (**) Macintosh mouse button emulation: (accel) set acceleration profile 0 (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) Synaptics touchpad driver version 1.1.0 (**) Option "Device" "/dev/input/event6" (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0 (II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple (--) SynPS/2 Synaptics TouchPad touchpad found (**) SynPS/2 Synaptics TouchPad: always reports core events (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00 (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0 (--) SynPS/2 Synaptics TouchPad touchpad found (II) config/hal: Adding input device Sleep Button (CM) (**) Sleep Button (CM): always reports core events (**) Sleep Button (CM): Device: "/dev/input/event3" (II) Sleep Button (CM): Found keys (II) Sleep Button (CM): Configuring as keyboard (II) XINPUT: Adding extended input device "Sleep Button (CM)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Power Button (CM) (**) Power Button (CM): always reports core events (**) Power Button (CM): Device: "/dev/input/event2" (II) Power Button (CM): Found keys (II) Power Button (CM): Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button (CM)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Power Button (FF) (**) Power Button (FF): always reports core events (**) Power Button (FF): Device: "/dev/input/event0" (II) Power Button (FF): Found keys (II) Power Button (FF): Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button (FF)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) SIS(0): Restoring by setting old mode 0x4a (II) No APM support in BIOS or kernel (II) SIS(0): Setting standard mode 0x15 (--) SynPS/2 Synaptics TouchPad touchpad found (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Macintosh mouse button emulation: Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) Power Button (FF): Device reopened after 1 attempts. (II) SIS(0): Restoring by setting old mode 0x4a (II) No APM support in BIOS or kernel (II) SIS(0): Setting standard mode 0x15 (--) SynPS/2 Synaptics TouchPad touchpad found (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Macintosh mouse button emulation: Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) Power Button (FF): Device reopened after 1 attempts. (II) SIS(0): Restoring by setting old mode 0x4a (II) No APM support in BIOS or kernel (II) SIS(0): Setting standard mode 0x15 (--) SynPS/2 Synaptics TouchPad touchpad found (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. (II) Macintosh mouse button emulation: Device reopened after 1 attempts. (II) Sleep Button (CM): Device reopened after 1 attempts. (II) Power Button (CM): Device reopened after 1 attempts. (II) Power Button (FF): Device reopened after 1 attempts.