Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.30.5-43.fc11.i586 (mockbuild@x86-4.fedora.phx.redhat.com) (gcc version 4.4.1 20090725 (Red Hat 4.4.1-2) (GCC) ) #1 SMP Thu Aug 27 21:18:54 EDT 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
 BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
 BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x2fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FE0000000 write-back
  1 base 020000000 mask FF0000000 write-back
  2 base 0E0000000 mask FF8000000 write-combining
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping: 0000000000000000-000000002fff0000
Using x86 segment limits to approximate NX protection
 0000000000 - 0000400000 page 4k
 0000400000 - 002fc00000 page 2M
 002fc00000 - 002fff0000 page 4k
kernel direct mapping tables up to 2fff0000 @ 10000-16000
RAMDISK: 2fcd3000 - 2ffdfe67
ACPI: RSDP 000f70d0 00014 (v00 AWARD )
ACPI: RSDT 2fff3000 0002C (v01 AWARD  AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 2fff3040 00074 (v01 AWARD  AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 2fff30c0 038FA (v01 AWARD  AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 2fff0000 00040
ACPI: APIC 2fff69c0 0005A (v01 AWARD  AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
767MB LOWMEM available.
  mapped low ram: 0 - 2fff0000
  low ram: 0 - 2fff0000
  node 0 low ram: 00000000 - 2fff0000
  node 0 bootmap 00011000 - 00017000
(9 early reservations) ==> bootmem [0000000000 - 002fff0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000400000 - 0000a68e4c]    TEXT DATA BSS ==> [0000400000 - 0000a68e4c]
  #4 [002fcd3000 - 002ffdfe67]          RAMDISK ==> [002fcd3000 - 002ffdfe67]
  #5 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #6 [0000a69000 - 0000a6d082]              BRK ==> [0000a69000 - 0000a6d082]
  #7 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
  #8 [0000011000 - 0000017000]          BOOTMAP ==> [0000011000 - 0000017000]
found SMP MP-table at [c00f5700] f5700
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x0002fff0
  HighMem  0x0002fff0 -> 0x0002fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0002fff0
On node 0 totalpages: 196479
free_area_init_node: node 0, pgdat c08f6540, node_mem_map c1000200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1504 pages used for memmap
  Normal zone: 190992 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 11 pages at c1604000, static data 24508 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 194943
Kernel command line: ro root=UUID=0fd747e4-3fd0-4f01-84d0-718702893430 rhgb quiet 3
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:1280
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1397.633 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 3931520 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Initializing HighMem for node 0 (00000000:00000000)
Memory: 765036k/786368k available (3273k kernel code, 20632k reserved, 2045k data, 400k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffc54000 - 0xfffff000   (3756 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf07f0000 - 0xff3fe000   ( 236 MB)
    lowmem  : 0xc0000000 - 0xefff0000   ( 767 MB)
      .init : 0xc093b000 - 0xc099f000   ( 400 kB)
      .data : 0xc07326d4 - 0xc0931b18   (2045 kB)
      .text : 0xc0400000 - 0xc07326d4   (3273 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.26 BogoMIPS (lpj=1397633)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20090320
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 18709 entries in 37 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Geode NX stepping 01
Brought up 1 CPUs
Total of 1 processors activated (2795.26 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=348 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=504 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=3272 bytes
CPU0 attaching NULL sched-domain.
net_namespace: 1096 bytes
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
Time: 18:07:37  Date: 09/17/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:02.5: reg 18 io port: [0x170-0x177]
pci 0000:00:02.5: reg 1c io port: [0x374-0x377]
pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f]
pci 0000:00:02.5: PME# supported from D3cold
pci 0000:00:02.5: PME# disabled
pci 0000:00:02.7: reg 10 io port: [0xe000-0xe0ff]
pci 0000:00:02.7: reg 14 io port: [0xe400-0xe47f]
pci 0000:00:02.7: supports D1 D2
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:02.7: PME# disabled
pci 0000:00:03.0: reg 10 32bit mmio: [0xeb004000-0xeb004fff]
pci 0000:00:03.1: reg 10 32bit mmio: [0xeb000000-0xeb000fff]
pci 0000:00:03.2: reg 10 32bit mmio: [0xeb001000-0xeb001fff]
pci 0000:00:03.3: reg 10 32bit mmio: [0xeb002000-0xeb002fff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:04.0: reg 10 io port: [0xe800-0xe8ff]
pci 0000:00:04.0: reg 14 32bit mmio: [0xeb003000-0xeb003fff]
pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 14 io port: [0xd000-0xd0ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xe9000000-0xe900ffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xe8000000-0xe9ffffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xd0000-0xd3fff has been reserved
system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
system 00:00: iomem range 0xfc000-0xfffff could not be reserved
system 00:00: iomem range 0x2fff0000-0x2fffffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0x2ffeffff could not be reserved
system 00:00: iomem range 0xffee0000-0xffefffff has been reserved
system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved
system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x805 has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xd000-0xdfff
pci 0000:00:01.0:   MEM window: 0xe8000000-0xe9ffffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xe8000000-0xe9ffffff]
pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3123k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1253210857.311:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1500
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: can't get bus number, assuming 0
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [FUTS]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
processor ACPI_CPU:00: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-sis 0000:00:00.0: SiS chipset [1039/0741]
agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input3
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: cache line size of 64 is not supported
ehci_hcd 0000:00:03.3: irq 23, io mem 0xeb002000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.30.5-43.fc11.i586 ehci_hcd
usb usb1: SerialNumber: 0000:00:03.3
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xeb004000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.30.5-43.fc11.i586 ohci_hcd
usb usb2: SerialNumber: 0000:00:03.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xeb000000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.30.5-43.fc11.i586 ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xeb001000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.30.5-43.fc11.i586 ohci_hcd
usb usb4: SerialNumber: 0000:00:03.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (12287 buckets, 49148 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: Trying ACPI perflib
powernow: ACPI perflib can not be used on this platform
powernow: ACPI and legacy methods failed
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
  Magic number: 9:270:140
block ram5: hash matches
acpi device:11: hash matches
Initalizing network drop monitor service
Freeing unused kernel memory: 400k freed
Write protecting the kernel text: 3276k
Write protecting the kernel read-only data: 1596k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[drm] Initialized drm 1.1.0 20060810
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[drm] Detected VRAM RAM=262144K, accessible=262144K, BAR=262144K
agpgart-sis 0000:00:00.0: AGP 3.5 bridge
agpgart-sis 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
agpgart-sis 0000:00:00.0: putting AGP V2 device into 4x mode
radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] setting agp_base to e0000000
[drm] setting agp_location to e0000000
[drm] Default TV standard: PAL
[drm] 27.000000000 MHz TV ref clk
[drm] DFP table revision: 4
usb 3-2: new low speed USB device using ohci_hcd and address 2
i2c-adapter i2c-1: unable to read EDID block.
radeon 0000:01:00.0: DVI-I-1: no EDID data
allocated ee8ac000 1600x900 fb: 0x00040000, bo ee545180
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
[drm] DAC-5: set mode 1600x900 1b
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] setting agp_base to e0000000
[drm] setting agp_location to e0000000
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
[drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
usb 3-2: New USB device found, idVendor=0461, idProduct=4d03
usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-2: Product: USB Mouse
usb 3-2: configuration #1 chosen from 1 choice
input: USB Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/input/input5
generic-usb 0003:0461:4D03.0001: input,hidraw0: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:03.1-2/input0
pata_sis 0000:00:02.5: version 0.5.2
pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
ata1.00: ATA-6: ST340015A, 3.15, max UDMA/100
ata1.00: 78165360 sectors, multi 16: LBA 
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      ST340015A        3.15 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
 sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: ATAPI: PLEXTOR DVDR   PX-716A, 1.11, max UDMA/66
ata2.00: configured for UDMA/66
scsi 1:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-716A   1.11 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1253210860.918:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 131089 rules.
SELinux: 8192 avtab hash slots, 131089 rules.
SELinux:  8 users, 11 roles, 2862 types, 129 bools, 1 sens, 1024 cats
SELinux:  74 classes, 131089 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1253210861.383:3): policy loaded auid=4294967295 ses=4294967295
udev: starting version 141
sis900.c: v1.08.10 Apr. 2 2006
sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 9.
0000:00:04.0: Using transceiver found at address 9 as default
eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 19, 00:16:ec:3f:11:71
input: PC Speaker as /devices/platform/pcspkr/input/input6
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
intel8x0_measure_ac97_clock: measured 50942 usecs (2451 samples)
intel8x0: clocking to 48000
end_request: I/O error, dev fd0, sector 0
ppdev: user-space parallel port driver
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1020116k swap on /dev/sda3.  Priority:-1 extents:1 across:1020116k 
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
eth0: Media Link On 100mbps full-duplex 
eth0: no IPv6 routers present
