<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN"> <HTML> <HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8"> <META NAME="GENERATOR" CONTENT="GtkHTML/3.0.9"> </HEAD> <BODY> <TT>>Simon Sedgwick wrote: >> I've just installed FC3-test1 on a spare box I've got laying >about. This >> was a clean install onto a disk that previously had FC1 on it and >ran >> fine. I chose a straight workstation install and performance >during the >> install process was okay. >> >> After it had finished installing I rebooted the machine and >everything >> was fine until the kernel had decompressed the it came up with >the >> following error: (dmesg) >> >> agpgart: Detected an Intel i815 Chipset, but could not find the >> secondary device. >> agpgart: Detected an Intel i815 Chipset. >> agpgart: Maximum main memory to use for agp memory: 439M >> agpgart: AGP aperture is 64M @ 0xf8000000 >> >> Anything obvious spring to mind chaps? >> >> Simon >> >> > >What is the second card that you have setup? I have a system with >an >Intel 815 video card that is working fine. > >With another Dell computer with an Intel 828 656 card (810 driver) >I get >2 hours out of X before the following process die. I thought >rd-bomb was >some 2 hr timer before I found out that it was a screensaver. > >This is an agpgart error also. >[drm:i830_wait_ring] *ERROR* space: 131052 wanted 131064 > >Hopefully this problem will be gone for FC3T2. > >Jim Well I don't have a secondary graphics adaptor in it. I tried installing FC2 and that does the same. Install goes fine but on first boot up it runs like a dog. I've just reinstalled FC1 to make sure it's not a hardware problem and thats running sweet. Shame because I was just getting into this whole spacial Nautilus thing :-( Simon</TT> </BODY> </HTML>