Linux version 2.6.23-0.222.rc9.git4.fc8 (kojibuilder@) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-31)) #1 SMP Sat Oct 6 13:53:58 EDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffae000 (usable) BIOS-e820: 000000001ffae000 - 0000000020000000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 130990) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 130990 HighMem 130990 -> 130990 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 130990 On node 0 totalpages: 130990 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4040 pages, LIFO batch:0 Normal zone: 1734 pages used for memmap Normal zone: 125160 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap DMI 2.3 present. Using APIC driver default ACPI: RSDP 000FDF00, 0014 (r0 DELL ) ACPI: RSDT 1FFF0000, 0028 (r1 DELL CPi R 27D5061E ASL 61) ACPI: FACP 1FFF0400, 0074 (r1 DELL CPi R 27D5061E ASL 61) ACPI: DSDT 1FFF0C00, 2E13 (r1 INT430 SYSFexxx 1001 MSFT 100000E) ACPI: FACS 1FFFF800, 0040 ACPI: PM-Timer IO Port: 0x808 Allocating PCI resources starting at 30000000 (gap: 20000000:deda0000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 129200 Kernel command line: ro root=LABEL=/1 rhgb quiet Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffb000 (01758000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0814000 soft=c07f4000 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1398.831 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1024 kB per task-struct memory footprint: 1680 bytes Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 505632k/523960k available (2271k kernel code, 17784k reserved, 1175k data, 568k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xdffae000 ( 511 MB) .init : 0xc0763000 - 0xc07f1000 ( 568 kB) .data : 0xc0637dd7 - 0xc075da44 (1175 kB) .text : 0xc0400000 - 0xc0637dd7 (2271 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 2800.16 BogoMIPS (lpj=1400083) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f1bf 00000000 00000000 00002040 00000180 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0800) CPU0: Intel(R) Pentium(R) M processor 1400MHz stepping 05 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=56 bytes sizeof(inode)=604 bytes sizeof(dentry)=160 bytes sizeof(ext3inode)=856 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=180 bytes sizeof(task_struct)=3376 bytes khelper used greatest stack depth: 3160 bytes left Booting paravirtualized kernel on bare hardware khelper used greatest stack depth: 3084 bytes left Time: 11:25:21 Date: 09/08/107 NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) Force enabled HPET at base address 0xfed00000 PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0880-08bf claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Time: tsc clocksource has been installed. pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:02: ioport range 0x800-0x805 has been reserved pnp: 00:02: ioport range 0x808-0x80f has been reserved pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved pnp: 00:03: ioport range 0x806-0x807 has been reserved pnp: 00:03: ioport range 0x810-0x85f has been reserved pnp: 00:03: ioport range 0x860-0x87f has been reserved pnp: 00:03: ioport range 0x880-0x8bf has been reserved pnp: 00:03: ioport range 0x8c0-0x8df has been reserved pnp: 00:08: ioport range 0x900-0x97f has been reserved PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: fc000000-fdffffff PREFETCH window: d0000000-dfffffff PCI: Bus 3, cardbus bridge: 0000:02:01.0 IO window: 0000d000-0000d0ff IO window: 0000d400-0000d4ff PREFETCH window: 30000000-33ffffff MEM window: 38000000-3bffffff PCI: Bridge: 0000:00:1e.0 IO window: d000-efff MEM window: f6000000-fbffffff PREFETCH window: 30000000-33ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:02:01.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 7, 655360 bytes) TCP bind hash table entries: 16384 (order: 7, 589824 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs... it is Switched to high resolution mode on CPU 0 Freeing initrd memory: 2916k freed khelper used greatest stack depth: 2956 bytes left apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1191842720.968:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 4961170A4469D9B5 - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THM] (53 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 agpgart: Detected an Intel 855PM Chipset. agpgart: AGP aperture is 128M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt for device 0000:00:1f.6 disabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Yenta: CardBus bridge found at 0000:02:01.0 [1028:016a] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:01.0, mfunc 0x012c1202, devctl 0x64 Yenta: ISA IRQ mask 0x04d8, PCI irq 11 Socket status: 30000086 Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff cs: IO port probe 0xd000-0xefff: clean. pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 11:165:428 Freeing unused kernel memory: 568k freed Write protecting the kernel read-only data: 877k Marking TSC unstable due to: TSC halts in idle. Time: hpet clocksource has been installed. ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected insmod used greatest stack depth: 1876 bytes left ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected input: PS/2 Mouse as /class/input/input2 input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected SCSI subsystem initialized usb 3-1: new low speed USB device using uhci_hcd and address 2 libata version 2.21 loaded. ata_piix 0000:00:1f.1: version 2.12 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15 usb 3-1: configuration #1 chosen from 1 choice input: Microsoft Microsoft USB Mouse as /class/input/input4 input: USB HID v1.10 Mouse [Microsoft Microsoft USB Mouse] on usb-0000:00:1d.1-1 ata1.00: ATA-6: TOSHIBA MK4025GAS, KA100A, max UDMA/100 ata1.00: 78140160 sectors, multi 8: LBA ata1.00: configured for UDMA/100 ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4241N, A100, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK4025GA KA10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4241N A100 PQ: 0 ANSI: 5 insmod used greatest stack depth: 760 bytes left kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 5 users, 11 roles, 2284 types, 107 bools, 1 sens, 1024 cats security: 67 classes, 227364 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1191842728.467:2): policy loaded auid=4294967295 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. intel_rng: FWH not detected ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) input: Lid Switch as /class/input/input5 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input6 ACPI: Power Button (CM) [PBTN] input: Sleep Button (CM) as /class/input/input7 ACPI: Sleep Button (CM) [SBTN] iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0 b44.c:v2.0 eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0d:56:36:9e:58 ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 ipw2100: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 ipw2100: Detected Intel PRO/Wireless 2100 Network Connection input: Video Bus as /class/input/input8 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) parport_pc 00:0c: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 firewire_ohci: Added fw-ohci device 0000:02:01.1, OHCI version 1.10 ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.5 to 64 firewire_core: created new fw device fw0 (0 config rom retries, S400) intel8x0_measure_ac97_clock: measured 50820 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1f.6 to 64 MC'97 1 converters and GPIO not ready (0xff00) audit(1191842739.681:3): avc: denied { read } for pid=1262 comm="salsa" name="asound.state" dev=sda1 ino=482591 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:var_lib_t:s0 tclass=file audit(1191842739.681:4): avc: denied { getattr } for pid=1262 comm="salsa" path="/var/lib/alsa/asound.state" dev=sda1 ino=482591 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:var_lib_t:s0 tclass=file SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions floppy0: no floppy controllers found ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda1, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda2, type ext3), uses xattr Adding 610460k swap on /dev/sda3. Priority:-1 extents:1 across:610460k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14a Clocksource tsc unstable (delta = -137031157 ns) ADDRCONF(NETDEV_UP): eth0: link is not ready audit(1191842761.673:5): avc: denied { read write } for pid=1745 comm="consoletype" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:consoletype_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file audit(1191842761.675:6): avc: denied { getattr } for pid=1745 comm="consoletype" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:consoletype_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready audit(1191842765.313:7): audit_pid=1873 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 eth0: no IPv6 routers present SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts usb 2-1: new full speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x1453 pid 0x2000 usbcore: registered new interface driver usblp usblp0: nonzero read bulk status received: -84 usblp0: nonzero write bulk status received: -71 usblp0: error -71 reading printer status usb 2-1: USB disconnect, address 2 usblp0: removed usb 3-1: USB disconnect, address 2 b44: eth0: Link is down. firewire_core: created new fw device fw1 (0 config rom retries, S400) firewire_core: phy config: card 0, new root=ffc1, gap_count=5 ============================================= [ INFO: possible recursive locking detected ] 2.6.23-0.222.rc9.git4.fc8 #1 --------------------------------------------- X/2522 is trying to acquire lock: (&q->lock){++..}, at: [] __wake_up+0x15/0x42 but task is already holding lock: (&q->lock){++..}, at: [] __wake_up+0x15/0x42 other info that might help us debug this: 2 locks held by X/2522: #0: (&client->lock){.+..}, at: [] queue_event+0x2b/0x68 [firewire_core] #1: (&q->lock){++..}, at: [] __wake_up+0x15/0x42 stack backtrace: [] show_trace_log_lvl+0x1a/0x2f [] show_trace+0x12/0x14 [] dump_stack+0x16/0x18 [] __lock_acquire+0x189/0xc67 [] lock_acquire+0x7b/0x9e [] _spin_lock_irqsave+0x4a/0x77 [] __wake_up+0x15/0x42 [] ep_poll_safewake+0x86/0xa8 [] ep_poll_callback+0x9f/0xaa [] __wake_up_common+0x32/0x55 [] __wake_up+0x31/0x42 [] queue_event+0x57/0x68 [firewire_core] [] handle_request+0xd8/0xe0 [firewire_core] [] fw_core_handle_request+0x215/0x23c [firewire_core] [] handle_ar_packet+0xd7/0xeb [firewire_ohci] [] ar_context_tasklet+0xb6/0xc4 [firewire_ohci] [] tasklet_action+0x68/0xd3 [] __do_softirq+0x78/0xff [] do_softirq+0x74/0xf7 =======================