X.Org X Server 1.6.1 Release Date: 2009-4-14 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.18-128.1.6.el5 i686 Current Operating System: Linux mobile 2.6.29.1-102.fc11.i586 #1 SMP Mon Apr 20 15:18:57 EDT 2009 i686 Build Date: 17 April 2009 03:12:26PM Build ID: xorg-x11-server 1.6.1-6.fc11 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 30 23:42:07 2009 (II) Loader magic: 0x3dc0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 1 (--) PCI:*(0@0:2:0) Cirrus Logic GD 5446 rev 0, Mem @ 0xf0000000/33554432, 0xf2000000/4096, BIOS @ 0x????????/131072 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default cirrus Device 0" Driver "cirrus" EndSection Section "Screen" Identifier "Builtin Default cirrus Screen 0" Device "Builtin Default cirrus Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default cirrus Screen 0" Screen "Builtin Default vesa Screen 0" Screen "Builtin Default fbdev Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default cirrus Screen 0" (0) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default cirrus Device 0" (==) No monitor specified for screen "Builtin Default cirrus Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default vesa Screen 0" (1) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default vesa Device 0" (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default fbdev Screen 0" (2) (**) | |-->Monitor "" (**) | |-->Device "Builtin Default fbdev Device 0" (==) No monitor specified for screen "Builtin Default fbdev Screen 0". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) No APM support in BIOS or kernel (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "cirrus" (II) Loading /usr/lib/xorg/modules/drivers//cirrus_drv.so (II) Module cirrus: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.2.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.2.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.6.0, module version = 0.4.0 ABI class: X.Org Video Driver, version 5.0 (II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8, CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD, CL-GD5465, CL-GD7548 (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (II) Primary Device is: PCI 00@00:02:0 (WW) Falling back to old probe method for cirrus (--) Assigning device section with no busID to primary device (--) Chipset CLGD5446 found (II) Loading sub module "cirrus_alpine" (II) LoadModule: "cirrus_alpine" (II) Loading /usr/lib/xorg/modules/drivers//cirrus_alpine.so (II) Module cirrus_alpine: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (WW) Falling back to old probe method for vesa (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.6.1, module version = 0.0.2 ABI class: X.Org Video Driver, version 5.0 (EE) open /dev/fb0: No such file or directory (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) CIRRUS(0): initializing int10 (II) CIRRUS(0): Primary V_BIOS segment is: 0xc000 (II) CIRRUS(0): Creating default Display subsection in Screen section "Builtin Default cirrus Screen 0" for depth/fbbpp 24/24 (--) CIRRUS(0): Depth 24, (==) framebuffer bpp 24 (==) CIRRUS(0): RGB weight 888 (==) CIRRUS(0): Default visual is TrueColor (==) CIRRUS(0): Using SW cursor (--) CIRRUS(0): Linear framebuffer at 0xF0000000 (--) CIRRUS(0): Using MMIO (--) CIRRUS(0): MMIO registers at 0xF2000000 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) CIRRUS(0): I2C bus "I2C bus 1" initialized. (II) CIRRUS(0): I2C bus "I2C bus 2" initialized. (II) CIRRUS(0): I2C device "I2C bus 1:E-EDID segment register" registered at address 0x60. (II) CIRRUS(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0. (==) CIRRUS(0): Using gamma correction (1.0, 1.0, 1.0) (--) CIRRUS(0): Memory Config reg 1 is 0x98 (--) CIRRUS(0): Memory Config reg 2 is 0x20 (--) CIRRUS(0): VideoRAM: 4096 kByte (==) CIRRUS(0): Min pixel clock is 12 MHz (--) CIRRUS(0): Max pixel clock is 85 MHz (II) CIRRUS(0): : Using default hsync range of 31.50-37.90 kHz (II) CIRRUS(0): : Using default vrefresh range of 50.00-70.00 Hz (WW) CIRRUS(0): Unable to estimate virtual size (II) CIRRUS(0): Clock range: 12.00 to 85.50 MHz (II) CIRRUS(0): Not using default mode "640x350" (vrefresh out of range) (II) CIRRUS(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "640x400" (vrefresh out of range) (II) CIRRUS(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "720x400" (vrefresh out of range) (II) CIRRUS(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "640x480" (vrefresh out of range) (II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "640x480" (vrefresh out of range) (II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "640x480" (hsync out of range) (II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "800x600" (hsync out of range) (II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "800x600" (hsync out of range) (II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "800x600" (hsync out of range) (II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1024x768" (hsync out of range) (II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1024x768" (hsync out of range) (II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1024x768" (hsync out of range) (II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "832x624" (hsync out of range) (II) CIRRUS(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode) (II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (--) CIRRUS(0): Virtual size is 800x600 (pitch 1024) (**) CIRRUS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) CIRRUS(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) CIRRUS(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) CIRRUS(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (**) CIRRUS(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz (II) CIRRUS(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (==) CIRRUS(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.2.1 ABI class: X.Org Video Driver, version 5.0 (II) UnloadModule: "vesa" (II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so (II) UnloadModule: "fbdev" (II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so (II) UnloadModule: "fbdevhw" (II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) CIRRUS(0): Using 765 lines for offscreen memory (II) CIRRUS(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid Horizontal and Vertical Lines (==) CIRRUS(0): Silken mouse enabled (II) CIRRUS(0): DPMS enabled (==) RandR enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: Screen 0 is not DRI2 capable (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) config/hal: Adding input device ImExPS/2 Generic Explorer Mouse (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.1, module version = 2.2.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) ImExPS/2 Generic Explorer Mouse: always reports core events (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event3" (II) ImExPS/2 Generic Explorer Mouse: Found 5 mouse buttons (II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes (II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s) (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5 (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE) (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1 (**) ImExPS/2 Generic Explorer Mouse: (accel) filter chain progression: 2.00 (**) ImExPS/2 Generic Explorer Mouse: (accel) filter stage 0: 20.00 ms (**) ImExPS/2 Generic Explorer Mouse: (accel) set acceleration profile 0 (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event1" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00 (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms (**) Macintosh mouse button emulation: (accel) set acceleration profile 0 (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "de" (**) Option "xkb_variant" "nodeadkeys" (**) Option "xkb_options" "terminate:ctrl_alt_bksp" (II) config/hal: Adding input device Power Button (FF) (**) Power Button (FF): always reports core events (**) Power Button (FF): Device: "/dev/input/event0" (II) Power Button (FF): Found keys (II) Power Button (FF): Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button (FF)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us"