Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31-40.fc12.x86_64 (mockbuild@x86-6.fedora.phx.redhat.com) (gcc version 4.4.1 20090918 (Red Hat 4.4.1-15) (GCC) ) #1 SMP Wed Sep 23 17:38:14 EDT 2009 Command line: ro root=UUID=d913938a-974b-4515-9519-8e7fdf6fa8bd SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us 3 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bbfd0000 (usable) BIOS-e820: 00000000bbfd0000 - 00000000bbfde000 (ACPI data) BIOS-e820: 00000000bbfde000 - 00000000bc000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) DMI present. last_pfn = 0xbbfd0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFE0000000 write-back 2 base 00A0000000 mask FFF0000000 write-back 3 base 00B0000000 mask FFF8000000 write-back 4 base 00B8000000 mask FFFC000000 write-back 5 base 00000DC000 mask 0FFFFFE000 write-back 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 ------------[ cut here ]------------ WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:456 generic_get_mtrr+0xdf/0x131() (Not tainted) Hardware name: MS-7252 mtrr: your BIOS has set up an incorrect mask, fixing it up. Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.31-40.fc12.x86_64 #1 Call Trace: [] warn_slowpath_common+0x95/0xc3 [] warn_slowpath_fmt+0x50/0x66 [] ? lock_release_holdtime+0x3f/0x146 [] generic_get_mtrr+0xdf/0x131 [] mtrr_cleanup+0xa1/0x413 [] mtrr_bp_init+0x1b8/0x1f1 [] ? e820_end_pfn.clone.0+0x90/0xae [] setup_arch+0x465/0xa26 [] ? printk+0x50/0x6b [] start_kernel+0xf3/0x44c [] x86_64_start_reservations+0xbb/0xd6 [] x86_64_start_kernel+0x105/0x128 ---[ end trace a7919e7f17c0a725 ]--- initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bbfd0000 0000000000 - 00bbe00000 page 2M 00bbe00000 - 00bbfd0000 page 4k kernel direct mapping tables up to bbfd0000 @ 8000-d000 RAMDISK: 37489000 - 37fef98f ACPI: RSDP 00000000000f8fa0 00014 (v00 ACPIAM) ACPI: RSDT 00000000bbfd0000 00034 (v01 A M I OEMRSDT 09000706 MSFT 00000097) ACPI: FACP 00000000bbfd0200 00084 (v02 A M I OEMFACP 09000706 MSFT 00000097) ACPI: DSDT 00000000bbfd0440 048F3 (v01 1ADIF 1ADIF006 00000006 INTL 20051117) ACPI: FACS 00000000bbfde000 00040 ACPI: APIC 00000000bbfd0390 00070 (v01 A M I OEMAPIC 09000706 MSFT 00000097) ACPI: MCFG 00000000bbfd0400 0003C (v01 A M I OEMMCFG 09000706 MSFT 00000097) ACPI: OEMB 00000000bbfde040 00060 (v01 A M I AMI_OEM 09000706 MSFT 00000097) ACPI: Local APIC address 0xfee00000 Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-00000000bbfd0000 Bootmem setup node 0 0000000000000000-00000000bbfd0000 NODE_DATA [000000000000b000 - 0000000000022fff] bootmap [0000000000023000 - 000000000003a7ff] pages 18 (7 early reservations) ==> bootmem [0000000000 - 00bbfd0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0002662390] TEXT DATA BSS ==> [0001000000 - 0002662390] #3 [0037489000 - 0037fef98f] RAMDISK ==> [0037489000 - 0037fef98f] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0002663000 - 0002663174] BRK ==> [0002663000 - 0002663174] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] found SMP MP-table at [ffff8800000ff780] ff780 [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880002c00000-ffff8800079fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000bbfd0 On node 0 totalpages: 769903 DMA zone: 104 pages used for memmap DMA zone: 102 pages reserved DMA zone: 3793 pages, LIFO batch:0 DMA32 zone: 19447 pages used for memmap DMA32 zone: 746457 pages, LIFO batch:31 Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at bc000000 (gap: bc000000:42c00000) NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 478 pages at ffff880007a00000, static data 1926816 bytes Built 1 zonelists in Node order, mobility grouping on. Total pages: 750250 Policy zone: DMA32 Kernel command line: ro root=UUID=d913938a-974b-4515-9519-8e7fdf6fa8bd SYSFONT=latarcyrheb-sun16 LANG=en_US.UTF-8 KEYTABLE=us 3 PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 8de0000000 size 32 MB Aperture beyond 4GB. Ignoring. Memory: 2960788k/3080000k available (5176k kernel code, 388k absent, 118824k reserved, 3132k data, 3196k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:424 Fast TSC calibration using PIT Detected 2008.797 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 6207 kB per task-struct memory footprint: 2688 bytes allocated 31457280 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups ODEBUG: 10 of 10 active objects replaced Calibrating delay loop (skipped), value calculated using timer frequency.. 4017.59 BogoMIPS (lpj=2008797) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Counters: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic counters: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose counters: 0 ... counter mask: 000000000000000f ACPI: Core revision 20090521 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 21032 entries in 83 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found apic 0 pin 0) ... ....... failed. ...trying to set up timer as Virtual Wire IRQ... ..... failed. ...trying to set up timer as ExtINT IRQ... ..... works. CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 lockdep: fixing up alternatives. Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4005.52 BogoMIPS (lpj=2002760) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 5 MCE banks x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Brought up 2 CPUs Total of 2 processors activated (8023.11 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=104 bytes sizeof(inode)=1168 bytes sizeof(dentry)=256 bytes sizeof(ext3inode)=1584 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=248 bytes sizeof(task_struct)=9304 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Booting paravirtualized kernel on bare hardware regulator: core version 0.5 Time: 12:36:22 Date: 09/25/09 NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, fe0bffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [c0000000, fcffffffff] bus: 00 index 2 mmio: [a0000, bffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI Warning: Incorrect checksum in table [OEMB] - 1F, should be 1E 20090521 tbutils-246 ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:05.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] pci 0000:00:05.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:05.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff] pci 0000:00:05.0: reg 30 32bit mmio: [0xfebe0000-0xfebfffff] pci 0000:00:0a.1: reg 20 io port: [0x5000-0x503f] pci 0000:00:0a.1: reg 24 io port: [0x6000-0x603f] pci 0000:00:0a.1: PME# supported from D3hot D3cold pci 0000:00:0a.1: PME# disabled pci 0000:00:0b.0: reg 10 32bit mmio: [0xfebde000-0xfebdefff] pci 0000:00:0b.0: supports D1 D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0b.1: reg 10 32bit mmio: [0xfebdfc00-0xfebdfcff] pci 0000:00:0b.1: supports D1 D2 pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.1: PME# disabled pci 0000:00:0d.0: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:0e.0: reg 10 io port: [0xe800-0xe807] pci 0000:00:0e.0: reg 14 io port: [0xe480-0xe483] pci 0000:00:0e.0: reg 18 io port: [0xe400-0xe407] pci 0000:00:0e.0: reg 1c io port: [0xe080-0xe083] pci 0000:00:0e.0: reg 20 io port: [0xe000-0xe00f] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfebdd000-0xfebddfff] pci 0000:00:10.1: reg 10 32bit mmio: [0xfebd8000-0xfebdbfff] pci 0000:00:10.1: PME# supported from D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:14.0: reg 10 32bit mmio: [0xfebdc000-0xfebdcfff] pci 0000:00:14.0: reg 14 io port: [0xdc00-0xdc07] pci 0000:00:14.0: supports D1 D2 pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.0: PME# disabled pci 0000:00:10.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LUB0] (IRQs 21) *10 ACPI: PCI Interrupt Link [LUB2] (IRQs 23) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10 ACPI: PCI Interrupt Link [LAZA] (IRQs 22) *11 ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LSA0] (IRQs 22) *7 ACPI: PCI Interrupt Link [LSA1] (IRQs 23) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x800-0x80f has been reserved system 00:07: ioport range 0x4000-0x407f has been reserved system 00:07: ioport range 0x4080-0x40ff has been reserved system 00:07: ioport range 0x4400-0x447f has been reserved system 00:07: ioport range 0x4480-0x44ff has been reserved system 00:07: ioport range 0x4800-0x487f has been reserved system 00:07: ioport range 0x4880-0x48ff has been reserved system 00:07: ioport range 0x2000-0x207f has been reserved system 00:07: ioport range 0x2080-0x20ff has been reserved system 00:07: iomem range 0xfeb80000-0xfebbffff has been reserved system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0b: ioport range 0xa00-0xa0f has been reserved system 00:0b: ioport range 0xa10-0xa1f has been reserved system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0xc0000-0xcffff has been reserved system 00:0d: iomem range 0xe0000-0xfffff could not be reserved system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 pci 0000:00:03.0: IO window: disabled pci 0000:00:03.0: MEM window: disabled Switched to high resolution mode on CPU 0 pci 0000:00:03.0: PREFETCH window: disabled pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 Switched to high resolution mode on CPU 1 pci 0000:00:04.0: IO window: disabled pci 0000:00:04.0: MEM window: disabled pci 0000:00:04.0: PREFETCH window: disabled pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 pci 0000:00:10.0: IO window: disabled pci 0000:00:10.0: MEM window: disabled pci 0000:00:10.0: PREFETCH window: disabled pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:10.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:03: resource 3 io: [0x00-0xffff] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 10, 4718592 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 11674k freed audit: initializing netlink socket (disabled) type=2000 audit(1253882182.304:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 5805 SELinux: Registering netfilter hooks cryptomgr_test used greatest stack depth: 5728 bytes left cryptomgr_test used greatest stack depth: 5520 bytes left alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:00.0: Found enabled HT MSI Mapping pci 0000:00:05.0: Boot video device pci 0000:00:09.0: Found enabled HT MSI Mapping pci 0000:00:09.0: Found enabled HT MSI Mapping pci 0000:00:09.0: Found enabled HT MSI Mapping alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:03.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:03.0: setting latency timer to 64 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:04.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:04.0: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 ACPI Warning: \_TZ_.THRM._TZD: Return Package type mismatch at index 0 - found Processor, expected Reference 20090521 nspredef-946 ACPI: Expecting a [Reference] package element, found type C thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (80 C) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23 alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:0b.1: setting latency timer to 64 ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: debug port 1 ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported ehci_hcd 0000:00:0b.1: irq 23, io mem 0xfebdfc00 ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31-40.fc12.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:0b.1 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected work_for_cpu used greatest stack depth: 3856 bytes left ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21 alloc irq_desc for 21 on node 0 alloc kstat_irqs on node 0 ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21 ohci_hcd 0000:00:0b.0: setting latency timer to 64 ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 21, io mem 0xfebde000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31-40.fc12.x86_64 ohci_hcd usb usb2: SerialNumber: 0000:00:0b.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 9:749:633 rtc_cmos 00:02: setting system clock to 2009-09-25 12:36:23 UTC (1253882183) Initalizing network drop monitor service Freeing unused kernel memory: 3196k freed NX-protecting the kernel data: ffffffff8150e000, 4469 pages Write protecting the kernel read-only data: 7392k dracut: dracut-002-7.gitb9c4654a.fc12 udev: starting version 145 ------------[ cut here ]------------ WARNING: at kernel/trace/ftrace.c:1003 ftrace_bug+0x198/0x27e() (Tainted: G W ) Hardware name: MS-7252 Modules linked in: i2c_core(+) Pid: 85, comm: modprobe Tainted: G W 2.6.31-40.fc12.x86_64 #1 Call Trace: [] warn_slowpath_common+0x95/0xc3 [] ? i2c_new_dummy+0x8/0x5e [i2c_core] [] warn_slowpath_null+0x27/0x3d [] ftrace_bug+0x198/0x27e [] ? i2c_new_dummy+0x8/0x5e [i2c_core] [] ftrace_convert_nops+0x201/0x2b9 [] ? i2c_new_dummy+0x8/0x5e [i2c_core] [] ftrace_module_notify+0x4c/0x7f [] notifier_call_chain+0x72/0xba [] ? __blocking_notifier_call_chain+0x4c/0x8e [] __blocking_notifier_call_chain+0x63/0x8e [] blocking_notifier_call_chain+0x27/0x3d [] sys_init_module+0xb7/0x249 [] system_call_fastpath+0x16/0x1b ---[ end trace a7919e7f17c0a727 ]--- ftrace faulted on writing [] i2c_new_dummy+0x8/0x5e [i2c_core] [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 nouveau 0000:00:05.0: PCI INT A -> Link[LNEC] -> GSI 19 (level, low) -> IRQ 19 nouveau 0000:00:05.0: setting latency timer to 64 nvidia-control: failed to evaluate _DSM: 5 nouveau 0000:00:05.0: Detected an NV40 generation card (0x04e000a2) nouveau 0000:00:05.0: Attempting to load BIOS image from PROM nouveau 0000:00:05.0: ... BIOS signature not found nouveau 0000:00:05.0: Attempting to load BIOS image from PRAMIN nouveau 0000:00:05.0: ... appears to be valid nouveau 0000:00:05.0: BIT BIOS found nouveau 0000:00:05.0: Bios version 05.51.28.45 nouveau 0000:00:05.0: TMDS table script pointers not stubbed nouveau 0000:00:05.0: Found Display Configuration Block version 3.0 nouveau 0000:00:05.0: Raw DCB entry 0: 02000300 00000023 nouveau 0000:00:05.0: Parsing VBIOS init table 0 at offset 0xCF25 nouveau 0000:00:05.0: Parsing VBIOS init table 1 at offset 0xD07F nouveau 0000:00:05.0: Parsing VBIOS init table 2 at offset 0xD080 nouveau 0000:00:05.0: Parsing VBIOS init table 3 at offset 0xD202 nouveau 0000:00:05.0: Parsing VBIOS init table 4 at offset 0xD24E usb 2-1: new low speed USB device using ohci_hcd and address 2 [TTM] Zone kernel: Available graphics memory: 1487830 kiB. nouveau 0000:00:05.0: Allocating FIFO number 0 nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 0 nouveau 0000:00:05.0: Initial CRTC_OWNER is 0 nouveau 0000:00:05.0: Detected a VGA connector nouveau 0000:00:05.0: Saving VGA fonts usb 2-1: New USB device found, idVendor=045e, idProduct=00dd usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: Comfort Curve Keyboard 2000 usb 2-1: Manufacturer: Microsoft usb 2-1: configuration #1 chosen from 1 choice input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.0/input/input3 generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:0b.0-1/input0 allocated 1280x1024 fb: 0x49000, bo ffff8800b434d5a0 nouveau 0000:00:05.0: Setting dpms mode 3 on vga encoder (output 0) input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.1/input/input4 generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:0b.0-1/input1 nouveau 0000:00:05.0: Setting dpms mode 3 on CRTC 0 nouveau 0000:00:05.0: vpll: n 13 m 3 log2p 0 [drm] DAC-7: set mode 1280x1024 19 nouveau 0000:00:05.0: nv04_dac_mode_set called for encoder 0 nouveau 0000:00:05.0: Setting dpms mode 0 on CRTC 0 nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0) nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B nouveau 0000:00:05.0: Setting dpms mode 3 on CRTC 1 nouveau 0000:00:05.0: GPU lockup - switching to software fbcon Console: switching to colour frame buffer device 160x64 fb0: nouveaufb frame buffer device registered panic notifier [drm] Initialized nouveau 0.0.15 20090420 for 0000:00:05.0 on minor 0 work_for_cpu used greatest stack depth: 3152 bytes left dracut: Starting plymouth daemon usb 2-2: new low speed USB device using ohci_hcd and address 3 sata_nv 0000:00:0e.0: version 3.5 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 alloc irq_desc for 22 on node 0 alloc kstat_irqs on node 0 sata_nv 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22 sata_nv 0000:00:0e.0: Using SWNCQ mode sata_nv 0000:00:0e.0: setting latency timer to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe000 irq 22 ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 22 ata1: SATA link down (SStatus 0 SControl 300) pata_amd 0000:00:0d.0: version 0.4.1 pata_amd 0000:00:0d.0: setting latency timer to 64 scsi2 : pata_amd scsi3 : pata_amd usb 2-2: New USB device found, idVendor=0458, idProduct=0056 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: 4D Scroll Mouse usb 2-2: Manufacturer: Genius usb 2-2: configuration #1 chosen from 1 choice input: Genius 4D Scroll Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input5 generic-usb 0003:0458:0056.0003: input,hidraw2: USB HID v1.10 Mouse [Genius 4D Scroll Mouse] on usb-0000:00:0b.0-2/input0 ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7: Hitachi HDS721616PLA380, P22OA70A, max UDMA/133 ata2.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 sd 1:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 ata3.00: ATA-7: WDC WD1600JB-00REA0, 20.00K20, max UDMA/100 sda6 > ata3.00: 312581808 sectors, multi 16: LBA48 ata3: nv_mode_filter: 0x3f39f&0x3f01f->0x3f01f, BIOS=0x3f000 (0xc6000000) ACPI=0x3f01f (20:900:0x11) ata3.00: configured for UDMA/100 scsi 2:0:0:0: Direct-Access ATA WDC WD1600JB-00R 20.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sda] Attached SCSI disk sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 < sdb5 sdb6 > sdb3 sd 2:0:0:0: [sdb] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. dracut: Mounted root filesystem /dev/sda2 dracut: Loading SELinux policy SELinux: 8192 avtab hash slots, 140102 rules. SELinux: 8192 avtab hash slots, 140102 rules. SELinux: 8 users, 12 roles, 2955 types, 129 bools, 1 sens, 1024 cats SELinux: 75 classes, 140102 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda2, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1253882187.126:2): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root udev: starting version 145 EDAC MC: Ver: 2.1.0 Sep 23 2009 EDAC amd64_edac: Ver: 3.2.0 Sep 23 2009 EDAC amd64: This node reports that Memory ECC is currently disabled. EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. Might be a BIOS bug, if BIOS says ECC is enabled Use of the override can cause unknown side effects. amd64_edac: probe of 0000:00:18.2 failed with error -22 forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 alloc irq_desc for 20 on node 0 alloc kstat_irqs on node 0 forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20 forcedeth 0000:00:14.0: setting latency timer to 64 nv_probe: set workaround bit for reversed mac addr forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 66:77:44:22:33:11 forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5000 i2c-adapter i2c-2: nForce2 SMBus adapter at 0x6000 k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:10.1: setting latency timer to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) ALSA sound/pci/hda/hda_codec.c:3866: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3870: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3871: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3874: dig-out=0x1e/0x0 ALSA sound/pci/hda/hda_codec.c:3882: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0 ALSA sound/pci/hda/hda_codec.c:3884: dig-in=0x1f ALSA sound/pci/hda/patch_realtek.c:1197: realtek: Enabling init ASM_ID=0xe603 CODEC_ID=10ec0883 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input6 ip used greatest stack depth: 3064 bytes left device-mapper: multipath: version 1.1.0 loaded EXT3 FS on sda2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb3, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2048276k swap on /dev/sda3. Priority:-1 extents:1 across:2048276k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [Firmware Bug]: powernow-k8: Try again with latest BIOS. NET: Registered protocol family 10 lo: Disabled Privacy Extensions SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bridge firewalling registered virbr0: starting userspace STP failed, starting kernel STP qemu-system-mip used greatest stack depth: 2824 bytes left SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs lo: Disabled Privacy Extensions SELinux: initialized (dev proc, type proc), uses genfs_contexts eth0: no IPv6 routers present