[Fedora-users-br] Modem 3G ZTE MF 636 (Brasiltelecom)
André Maurício
ammvaz em gmail.com
Seg Mar 30 13:20:42 UTC 2009
Isamar,
Obrigado, com os passos indicados consegui detectar o modem.
Agora estou brigando para fazer ele conectar.
André
2009/3/27 Isamar Maia <isamar em gmail.com>:
> Seu modem eh este daqui:
>
>> usb 2-2: New USB device found, idVendor=19d2, idProduct=2000
>> usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
>> usb 2-2: Product: ZTE CDMA Technologies MSM
>> usb 2-2: Manufacturer: ZTE,Incorporated
>> usb 2-2: SerialNumber: 1234567890ABCDEF
>
> Teste abri-lo com o wvdial ou gnome-ppp atraves da porta /dev/ttyUSB4
>
> Se nao funcionar, tente abri-lo com o "minicom" na mesma porta e rode
> o comando padrao "HAYES":
>
> AT+ZCDRUN=8 <ENTER>
>
>
> Caso nao consiga abri-lo via "minicom" , abra-o usando Hyperterminal
> numa maquina Windows e dispare o comando acima.
>
> Em seguida, crie um regra de HAL para ele ser carregado automagicamente.
> Coloque o conteudo abaixo em um novo arquivo de nome
> /etc/udev/rules.d/90-zte.rules
>
> ACTION!="add", GOTO="ZTE_End"
> #
> SUBSYSTEM=="usb", SYSFS{idProduct}=="0031",
> SYSFS{idVendor}=="19d2", GOTO="ZTE_Modem"
> #
> LABEL="ZTE_Modem"
> RUN+="/sbin/modprobe usbserial vendor=0x19d2 product=0x0031",
> MODE="660", GROUP="dialout"
> #
> LABEL="ZTE_End"
>
>
> Veja o posting do "GeorgeVita" em
> http://ubuntuforums.org/archive/index.php/t-1065934.html
>
> Isamar
>
>
>
> 2009/3/27 André Maurício <ammvaz em gmail.com>:
>> Caro Isamar, segue abaixo:
>>
>> Saida do lsusb
>>
>> Bus 002 Device 003: ID 19d2:2000 ONDA Communication S.p.A.
>> Bus 002 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 006 Device 002: ID 04f3:0210 Elan Microelectronics Corp. AM-400
>> Hama Optical Mouse
>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 001 Device 002: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B
>> Wireless 802.11g 54Mbps Network Adapter
>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>
>> saida do dmesg:
>>
>> Initializing cgroup subsys cpuset
>> Initializing cgroup subsys cpu
>> Linux version 2.6.27.19-170.2.35.fc10.x86_64
>> (mockbuild em xenbuilder2.fedora.redhat.com) (gcc version 4.3.2 20081105
>> (Red Hat 4.3.2-7) (GCC) ) #1 SMP Mon Feb 23 13:00:23 EST 2009
>> Command line: ro root=UUID=e308f504-77cc-4600-b01d-bccc02c28262 rhgb
>> quiet vga=791
>> KERNEL supported cpus:
>> Intel GenuineIntel
>> AMD AuthenticAMD
>> Centaur CentaurHauls
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
>> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
>> BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI NVS)
>> BIOS-e820: 000000007f6df000 - 0000000080000000 (reserved)
>> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
>> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
>> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
>> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
>> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>> DMI present.
>> last_pfn = 0x7f6d0 max_arch_pfn = 0x3ffffffff
>> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>> init_memory_mapping
>> 0000000000 - 007f600000 page 2M
>> 007f600000 - 007f6d0000 page 4k
>> kernel direct mapping tables up to 7f6d0000 @ 8000-c000
>> last_map_addr: 7f6d0000 end: 7f6d0000
>> RAMDISK: 37c75000 - 37fefbbf
>> ACPI: RSDP 000F79D0, 0024 (r2 PTLTD )
>> ACPI: XSDT 7F6D41B9, 008C (r1 ITINFO 6040000 LTP 0)
>> ACPI: FACP 7F6DBD48, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
>> ACPI: DSDT 7F6D577B, 6559 (r2 INTEL CRESTLNE 6040000 INTL 20050624)
>> ACPI: FACS 7F6DEFC0, 0040
>> ACPI: APIC 7F6DBE3C, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
>> ACPI: HPET 7F6DBEA4, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
>> ACPI: MCFG 7F6DBEDC, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
>> ACPI: TCPA 7F6DBF18, 0032 (r1 Intel CRESTLN 6040000 5A52)
>> ACPI: TMOR 7F6DBF4A, 0026 (r1 PTLTD 6040000 PTL 3)
>> ACPI: APIC 7F6DBF70, 0068 (r1 PTLTD APIC 6040000 LTP
>> 0)
>> ACPI: BOOT 7F6DBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
>> ACPI: SSDT 7F6D54CE, 02AD (r1 SataRe SataAhci 1000 INTL 20050624)
>> ACPI: SSDT 7F6D5455, 0079 (r1 BrtRef DD01BRT 1000 INTL 20050624)
>> ACPI: SSDT 7F6D47D1, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
>> ACPI: SSDT 7F6D472B, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
>> ACPI: SSDT 7F6D4245, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
>> ACPI: BIOS bug: multiple APIC/MADT found, using 0
>> ACPI: If "acpi_apic_instance=2" works better, notify
>> linux-acpi em vger.kernel.org
>> No NUMA configuration found
>> Faking a node at 0000000000000000-000000007f6d0000
>> Bootmem setup node 0 0000000000000000-000000007f6d0000
>> NODE_DATA [000000000000a000 - 000000000001efff]
>> bootmap [000000000001f000 - 000000000002eedf] pages 10
>> (6 early reservations) ==> bootmem [0000000000 - 007f6d0000]
>> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
>> 0000001000]
>> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
>> 0000008000]
>> #2 [0000200000 - 0000a2f0cc] TEXT DATA BSS ==> [0000200000 -
>> 0000a2f0cc]
>> #3 [0037c75000 - 0037fefbbf] RAMDISK ==> [0037c75000 -
>> 0037fefbbf]
>> #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 -
>> 0000100000]
>> #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 -
>> 000000a000]
>> found SMP MP-table at [ffff8800000f7a50] 000f7a50
>> [ffffe20000000000-ffffe20001bfffff] PMD ->
>> [ffff880001200000-ffff880002dfffff] on node 0
>> Zone PFN ranges:
>> DMA 0x00000000 -> 0x00001000
>> DMA32 0x00001000 -> 0x00100000
>> Normal 0x00100000 -> 0x00100000
>> Movable zone start PFN for each node
>> early_node_map[2] active PFN ranges
>> 0: 0x00000000 -> 0x0000009f
>> 0: 0x00000100 -> 0x0007f6d0
>> On node 0 totalpages: 521839
>> DMA zone: 1745 pages, LIFO batch:0
>> DMA32 zone: 510760 pages, LIFO batch:31
>> ACPI: PM-Timer IO Port: 0x1008
>> ACPI: Local APIC address 0xfee00000
>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>> IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>> ACPI: IRQ0 used by override.
>> ACPI: IRQ2 used by override.
>> ACPI: IRQ9 used by override.
>> Setting APIC routing to flat
>> ACPI: HPET id: 0x8086a201 base: 0xfed00000
>> Using ACPI (MADT) for SMP configuration information
>> SMP: Allowing 2 CPUs, 0 hotplug CPUs
>> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>> PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>> PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>> Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>> PERCPU: Allocating 65184 bytes of per cpu data
>> NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
>> Built 1 zonelists in Node order, mobility grouping on. Total pages:
>> 512505
>> Policy zone: DMA32
>> Kernel command line: ro root=UUID=e308f504-77cc-4600-b01d-bccc02c28262
>> rhgb quiet vga=791
>> Initializing CPU#0
>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>> Extended CMOS year: 2000
>> TSC: PIT calibration confirmed by PMTIMER.
>> TSC: using PMTIMER calibration value
>> Detected 1861.989 MHz processor.
>> Console: colour dummy device 80x25
>> console [tty0] enabled
>> Checking aperture...
>> No AGP bridge found
>> Calgary: detecting Calgary via BIOS EBDA area
>> Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>> Memory: 2046372k/2087744k available (3307k kernel code, 40984k
>> reserved, 1840k data, 1296k init)
>> CPA: page pool initialized 1 of 1 pages preallocated
>> SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
>> Nodes=1
>> hpet clockevent registered
>> Calibrating delay loop (skipped), value calculated using timer
>> frequency.. 3723.97 BogoMIPS (lpj=1861989)
>> Security Framework initialized
>> SELinux: Initializing.
>> SELinux: Starting in permissive mode
>> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>> Mount-cache hash table entries: 256
>> Initializing cgroup subsys ns
>> Initializing cgroup subsys cpuacct
>> Initializing cgroup subsys devices
>> CPU: L1 I cache: 32K, L1 D cache: 32K
>> CPU: L2 cache: 1024K
>> CPU 0/0 -> Node 0
>> CPU: Physical Processor ID: 0
>> CPU: Processor Core ID: 0
>> CPU0: Thermal monitoring enabled (TM2)
>> using mwait in idle threads.
>> ACPI: Core revision 20080609
>> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> CPU0: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
>> Using local APIC timer interrupts.
>> APIC timer calibration result 8312466
>> Detected 8.312 MHz APIC timer.
>> Booting processor 1/1 ip 6000
>> Initializing CPU#1
>> Calibrating delay using timer specific routine.. 3723.91 BogoMIPS
>> (lpj=1861955)
>> CPU: L1 I cache: 32K, L1 D cache: 32K
>> CPU: L2 cache: 1024K
>> CPU 1/1 -> Node 0
>> CPU: Physical Processor ID: 0
>> CPU: Processor Core ID: 1
>> CPU1: Thermal monitoring enabled (TM2)
>> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>> CPU1: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
>> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>> Brought up 2 CPUs
>> Total of 2 processors activated (7447.88 BogoMIPS).
>> sizeof(vma)=176 bytes
>> sizeof(page)=56 bytes
>> sizeof(inode)=560 bytes
>> sizeof(dentry)=208 bytes
>> sizeof(ext3inode)=760 bytes
>> sizeof(buffer_head)=104 bytes
>> sizeof(skbuff)=232 bytes
>> sizeof(task_struct)=5904 bytes
>> CPU0 attaching sched-domain:
>> domain 0: span 0-1 level MC
>> groups: 0 1
>> domain 1: span 0-1 level NODE
>> groups: 0-1
>> CPU1 attaching sched-domain:
>> domain 0: span 0-1 level MC
>> groups: 1 0
>> domain 1: span 0-1 level NODE
>> groups: 0-1
>> net_namespace: 1552 bytes
>> Booting paravirtualized kernel on bare hardware
>> Time: 17:24:02 Date: 03/27/09
>> NET: Registered protocol family 16
>> No dock devices found.
>> ACPI: bus type pci registered
>> PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>> PCI: MCFG area at e0000000 reserved in E820
>> PCI: Using MMCONFIG at e0000000 - efffffff
>> PCI: Using configuration type 1 for base access
>> ACPI: EC: Look up EC in DSDT
>> ACPI: BIOS _OSI(Linux) query ignored
>> ACPI: If "acpi_osi=Linux" works better, please notify
>> linux-acpi em vger.kernel.org
>> ACPI: Interpreter enabled
>> ACPI: (supports S0 S3 S4 S5)
>> ACPI: Using IOAPIC for interrupt routing
>> ACPI: EC: GPE = 0x1a, I/O: command/status = 0x66, data = 0x62
>> ACPI: EC: driver started in poll mode
>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>> PCI: 0000:00:02.0 reg 10 64bit mmio: [f4000000, f40fffff]
>> PCI: 0000:00:02.0 reg 18 64bit mmio: [d0000000, dfffffff]
>> PCI: 0000:00:02.0 reg 20 io port: [1800, 1807]
>> PCI: 0000:00:02.1 reg 10 64bit mmio: [f4100000, f41fffff]
>> PCI: 0000:00:1a.0 reg 20 io port: [1820, 183f]
>> PCI: 0000:00:1a.1 reg 20 io port: [1840, 185f]
>> PCI: 0000:00:1a.7 reg 10 32bit mmio: [f4504800, f4504bff]
>> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>> pci 0000:00:1a.7: PME# disabled
>> PCI: 0000:00:1b.0 reg 10 64bit mmio: [f4500000, f4503fff]
>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>> pci 0000:00:1b.0: PME# disabled
>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>> pci 0000:00:1c.0: PME# disabled
>> pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>> pci 0000:00:1c.5: PME# disabled
>> PCI: 0000:00:1d.0 reg 20 io port: [1860, 187f]
>> PCI: 0000:00:1d.1 reg 20 io port: [1880, 189f]
>> PCI: 0000:00:1d.2 reg 20 io port: [18a0, 18bf]
>> PCI: 0000:00:1d.7 reg 10 32bit mmio: [f4504c00, f4504fff]
>> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>> pci 0000:00:1d.7: PME# disabled
>> pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6
>> ACPI/GPIO/TCO
>> pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>> PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
>> PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
>> PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
>> PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
>> PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f]
>> PCI: 0000:00:1f.2 reg 10 io port: [1c00, 1c07]
>> PCI: 0000:00:1f.2 reg 14 io port: [18d4, 18d7]
>> PCI: 0000:00:1f.2 reg 18 io port: [18d8, 18df]
>> PCI: 0000:00:1f.2 reg 1c io port: [18d0, 18d3]
>> PCI: 0000:00:1f.2 reg 20 io port: [18e0, 18ff]
>> PCI: 0000:00:1f.2 reg 24 32bit mmio: [f4504000, f45047ff]
>> pci 0000:00:1f.2: PME# supported from D3hot
>> pci 0000:00:1f.2: PME# disabled
>> PCI: 0000:00:1f.3 reg 10 32bit mmio: [0, ff]
>> PCI: 0000:00:1f.3 reg 20 io port: [1c20, 1c3f]
>> PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
>> PCI: bridge 0000:00:1c.0 32bit mmio: [f2000000, f3ffffff]
>> PCI: bridge 0000:00:1c.0 64bit mmio pref: [f0000000, f1ffffff]
>> PCI: 0000:04:00.0 reg 10 64bit mmio: [f4200000, f4203fff]
>> PCI: 0000:04:00.0 reg 18 io port: [3000, 30ff]
>> PCI: 0000:04:00.0 reg 30 32bit mmio: [0, 1ffff]
>> pci 0000:04:00.0: supports D1
>> pci 0000:04:00.0: supports D2
>> pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>> pci 0000:04:00.0: PME# disabled
>> PCI: bridge 0000:00:1c.5 io port: [3000, 3fff]
>> PCI: bridge 0000:00:1c.5 32bit mmio: [f4200000, f42fffff]
>> pci 0000:00:1e.0: transparent bridge
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>> ACPI Error (uteval-0243): No object was returned from
>> [\_SB_.PCI0.PCIB._PRT] (Node ffff88007f34c360), AE_NOT_EXIST
>> ACPI Exception (pci_irq-0290): AE_NOT_EXIST, Evaluating _PRT
>> [AE_NOT_EXIST] [20080609]
>> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
>> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>> ACPI: Power Resource [FN00] (off)
>> ACPI: Power Resource [FN01] (off)
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI init
>> ACPI: bus type pnp registered
>> pnp: PnP ACPI: found 10 devices
>> ACPI: ACPI bus type pnp unregistered
>> SCSI subsystem initialized
>> libata version 3.00 loaded.
>> usbcore: registered new interface driver usbfs
>> usbcore: registered new interface driver hub
>> usbcore: registered new device driver usb
>> PCI: Using ACPI for IRQ routing
>> NetLabel: Initializing
>> NetLabel: domain hash size = 128
>> NetLabel: protocols = UNLABELED CIPSOv4
>> NetLabel: unlabeled traffic allowed by default
>> PCI-GART: No AMD northbridge found.
>> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>> hpet0: 3 64-bit timers, 14318180 Hz
>> tracer: 1286 pages allocated for 65536 entries of 80 bytes
>> actual entries 65586
>> ACPI: RTC can wake from S4
>> system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>> system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>> system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>> system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>> system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>> system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
>> system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
>> system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
>> system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
>> system 00:06: ioport range 0x680-0x69f has been reserved
>> system 00:06: ioport range 0x800-0x80f has been reserved
>> system 00:06: ioport range 0x1000-0x107f has been reserved
>> system 00:06: ioport range 0x1180-0x11bf has been reserved
>> system 00:06: ioport range 0x1640-0x164f has been reserved
>> system 00:06: ioport range 0xfe00-0xfe00 has been reserved
>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>> pci 0000:00:1c.0: IO window: 0x2000-0x2fff
>> pci 0000:00:1c.0: MEM window: 0xf2000000-0xf3ffffff
>> pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
>> pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
>> pci 0000:00:1c.5: IO window: 0x3000-0x3fff
>> pci 0000:00:1c.5: MEM window: 0xf4200000-0xf42fffff
>> pci 0000:00:1c.5: PREFETCH window: 0x00000088000000-0x000000880fffff
>> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
>> pci 0000:00:1e.0: IO window: disabled
>> pci 0000:00:1e.0: MEM window: disabled
>> pci 0000:00:1e.0: PREFETCH window: disabled
>> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>> pci 0000:00:1c.0: setting latency timer to 64
>> pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>> pci 0000:00:1c.5: setting latency timer to 64
>> pci 0000:00:1e.0: setting latency timer to 64
>> bus: 00 index 0 io port: [0, ffff]
>> bus: 00 index 1 mmio: [0, ffffffffffffffff]
>> bus: 02 index 0 io port: [2000, 2fff]
>> bus: 02 index 1 mmio: [f2000000, f3ffffff]
>> bus: 02 index 2 mmio: [f0000000, f1ffffff]
>> bus: 02 index 3 mmio: [0, 0]
>> bus: 04 index 0 io port: [3000, 3fff]
>> bus: 04 index 1 mmio: [f4200000, f42fffff]
>> bus: 04 index 2 mmio: [88000000, 880fffff]
>> bus: 04 index 3 mmio: [0, 0]
>> bus: 05 index 0 mmio: [0, 0]
>> bus: 05 index 1 mmio: [0, 0]
>> bus: 05 index 2 mmio: [0, 0]
>> bus: 05 index 3 io port: [0, ffff]
>> bus: 05 index 4 mmio: [0, ffffffffffffffff]
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> TCP: Hash tables configured (established 262144 bind 65536)
>> TCP reno registered
>> NET: Registered protocol family 1
>> checking if image is initramfs...<7>Switched to high resolution mode
>> on CPU 1
>> Switched to high resolution mode on CPU 0
>> it is
>> Freeing initrd memory: 3562k freed
>> Simple Boot Flag at 0x36 set to 0x80
>> audit: initializing netlink socket (disabled)
>> type=2000 audit(1238174642.893:1): initialized
>> HugeTLB registered 2 MB page size, pre-allocated 0 pages
>> VFS: Disk quotas dquot_6.5.1
>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> msgmni has been set to 4003
>> SELinux: Registering netfilter hooks
>> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> pci 0000:00:02.0: Boot video device
>> pcieport-driver 0000:00:1c.0: setting latency timer to 64
>> pcieport-driver 0000:00:1c.0: found MSI capability
>> pci_express 0000:00:1c.0:pcie00: allocate port service
>> pci_express 0000:00:1c.0:pcie02: allocate port service
>> pci_express 0000:00:1c.0:pcie03: allocate port service
>> pcieport-driver 0000:00:1c.5: setting latency timer to 64
>> pcieport-driver 0000:00:1c.5: found MSI capability
>> pci_express 0000:00:1c.5:pcie00: allocate port service
>> pci_express 0000:00:1c.5:pcie02: allocate port service
>> pci_express 0000:00:1c.5:pcie03: allocate port service
>> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>> acpiphp_glue: can't get bus number, assuming 0
>> vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010980000, using
>> 3072k, total 7616k
>> vesafb: mode is 1024x768x16, linelength=2048, pages=3
>> vesafb: scrolling: redraw
>> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>> Console: switching to colour frame buffer device 128x48
>> fb0: VESA VGA frame buffer device
>> input: Power Button (FF) as
>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>> ACPI: Power Button (FF) [PWRF]
>> input: Lid Switch as
>> /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>> ACPI: Lid Switch [LID]
>> input: Power Button (CM) as
>> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>> ACPI: Power Button (CM) [PWRB]
>> input: Sleep Button (CM) as
>> /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>> ACPI: Sleep Button (CM) [SLPB]
>> ACPI: Transitioning device [FAN0] to D3
>> fan PNP0C0B:00: registered as cooling_device0
>> ACPI: Fan [FAN0] (off)
>> ACPI: Transitioning device [FAN1] to D3
>> fan PNP0C0B:01: registered as cooling_device1
>> ACPI: Fan [FAN1] (off)
>> ACPI: SSDT 7F6D5113, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624)
>> ACPI: SSDT 7F6D4A30, 065E (r1 PmRef Cpu0Cst 3001 INTL 20050624)
>> Monitor-Mwait will be used to enter C-1 state
>> Monitor-Mwait will be used to enter C-2 state
>> Monitor-Mwait will be used to enter C-3 state
>> ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>> processor ACPI0007:00: registered as cooling_device2
>> ACPI: Processor [CPU0] (supports 8 throttling states)
>> ACPI: SSDT 7F6D538D, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
>> ACPI: SSDT 7F6D508E, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
>> ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>> processor ACPI0007:01: registered as cooling_device3
>> ACPI: Processor [CPU1] (supports 8 throttling states)
>> thermal LNXTHERM:01: registered as thermal_zone0
>> ACPI: Thermal Zone [TZ00] (31 C)
>> thermal LNXTHERM:02: registered as thermal_zone1
>> ACPI: Thermal Zone [TZ01] (27 C)
>> hpet_resources: 0xfed00000 is busy
>> Non-volatile memory driver v1.2
>> Linux agpgart interface v0.103
>> agpgart-intel 0000:00:00.0: Intel 965GM Chipset
>> agpgart-intel 0000:00:00.0: detected 7676K stolen memory
>> agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>> Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>> brd: module loaded
>> loop: module loaded
>> input: Macintosh mouse button emulation as
>> /devices/virtual/input/input4
>> Driver 'sd' needs updating - please use bus_type methods
>> Driver 'sr' needs updating - please use bus_type methods
>> ahci 0000:00:1f.2: version 3.0
>> ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>> ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl
>> SATA mode
>> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
>> ahci 0000:00:1f.2: setting latency timer to 64
>> scsi0 : ahci
>> scsi1 : ahci
>> scsi2 : ahci
>> ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed
>> irq 19
>> ata2: SATA max UDMA/133 abar m2048 em 0xf4504000 port 0xf4504180 irq 19
>> ata3: SATA max UDMA/133 abar m2048 em 0xf4504000 port 0xf4504200 irq 19
>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> ata1.00: _GTF unexpected object type 0x1
>> ata1.00: ATA-8: SAMSUNG HM251JI, 2SS00_01, max UDMA7
>> ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>> ata1.00: _GTF unexpected object type 0x1
>> ata1.00: configured for UDMA/133
>> ata2: SATA link down (SStatus 0 SControl 300)
>> ata3: SATA link down (SStatus 0 SControl 300)
>> scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM251JI 2SS0 PQ: 0
>> ANSI: 5
>> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>> sd 0:0:0:0: [sda] Write Protect is off
>> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
>> support DPO or FUA
>> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>> sd 0:0:0:0: [sda] Write Protect is off
>> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
>> support DPO or FUA
>> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>> sd 0:0:0:0: [sda] Attached SCSI disk
>> sd 0:0:0:0: Attached scsi generic sg0 type 0
>> ata_piix 0000:00:1f.1: version 2.12
>> ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>> ata_piix 0000:00:1f.1: setting latency timer to 64
>> scsi3 : ata_piix
>> scsi4 : ata_piix
>> ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>> ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>> ata4.00: ATAPI: Optiarc DVD RW AD-7530B, NX09, max UDMA/33
>> ata4.00: configured for UDMA/33
>> isa bounce pool size: 16 pages
>> scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NX09 PQ: 0
>> ANSI: 5
>> sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>> Uniform CD-ROM driver Revision: 3.20
>> sr 3:0:0:0: Attached scsi CD-ROM sr0
>> sr 3:0:0:0: Attached scsi generic sg1 type 5
>> ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>> ehci_hcd 0000:00:1a.7: setting latency timer to 64
>> ehci_hcd 0000:00:1a.7: EHCI Host Controller
>> ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>> ehci_hcd 0000:00:1a.7: debug port 1
>> ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>> ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4504800
>> ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>> usb usb1: configuration #1 chosen from 1 choice
>> hub 1-0:1.0: USB hub found
>> hub 1-0:1.0: 4 ports detected
>> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> usb usb1: Product: EHCI Host Controller
>> usb usb1: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 ehci_hcd
>> usb usb1: SerialNumber: 0000:00:1a.7
>> ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>> ehci_hcd 0000:00:1d.7: setting latency timer to 64
>> ehci_hcd 0000:00:1d.7: EHCI Host Controller
>> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>> ehci_hcd 0000:00:1d.7: debug port 1
>> ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>> ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4504c00
>> usb 1-1: new high speed USB device using ehci_hcd and address 2
>> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>> usb usb2: configuration #1 chosen from 1 choice
>> hub 2-0:1.0: USB hub found
>> hub 2-0:1.0: 6 ports detected
>> usb 1-1: configuration #1 chosen from 1 choice
>> usb 1-1: New USB device found, idVendor=0bda, idProduct=8189
>> usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> usb 1-1: Product: RTL8187B_WLAN_Adapter
>> usb 1-1: Manufacturer: Manufacturer_Realtek
>> usb 1-1: SerialNumber: 00e04c000001
>> usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> usb usb2: Product: EHCI Host Controller
>> usb usb2: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 ehci_hcd
>> usb usb2: SerialNumber: 0000:00:1d.7
>> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>> USB Universal Host Controller Interface driver v3.0
>> uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> uhci_hcd 0000:00:1a.0: setting latency timer to 64
>> uhci_hcd 0000:00:1a.0: UHCI Host Controller
>> uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>> uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
>> usb usb3: configuration #1 chosen from 1 choice
>> hub 3-0:1.0: USB hub found
>> hub 3-0:1.0: 2 ports detected
>> usb 2-3: new high speed USB device using ehci_hcd and address 2
>> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> usb usb3: Product: UHCI Host Controller
>> usb usb3: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
>> usb usb3: SerialNumber: 0000:00:1a.0
>> uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>> uhci_hcd 0000:00:1a.1: setting latency timer to 64
>> uhci_hcd 0000:00:1a.1: UHCI Host Controller
>> uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>> uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
>> usb usb4: configuration #1 chosen from 1 choice
>> hub 4-0:1.0: USB hub found
>> hub 4-0:1.0: 2 ports detected
>> usb 2-3: configuration #1 chosen from 1 choice
>> usb 2-3: New USB device found, idVendor=0bda, idProduct=0158
>> usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> usb 2-3: Product: USB2.0-CRW
>> usb 2-3: Manufacturer: Generic
>> usb 2-3: SerialNumber: 20060413092100000
>> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> usb usb4: Product: UHCI Host Controller
>> usb usb4: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
>> usb usb4: SerialNumber: 0000:00:1a.1
>> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>> uhci_hcd 0000:00:1d.0: setting latency timer to 64
>> uhci_hcd 0000:00:1d.0: UHCI Host Controller
>> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>> uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
>> usb usb5: configuration #1 chosen from 1 choice
>> hub 5-0:1.0: USB hub found
>> hub 5-0:1.0: 2 ports detected
>> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> usb usb5: Product: UHCI Host Controller
>> usb usb5: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
>> usb usb5: SerialNumber: 0000:00:1d.0
>> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>> uhci_hcd 0000:00:1d.1: setting latency timer to 64
>> uhci_hcd 0000:00:1d.1: UHCI Host Controller
>> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>> uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
>> usb usb6: configuration #1 chosen from 1 choice
>> hub 6-0:1.0: USB hub found
>> hub 6-0:1.0: 2 ports detected
>> usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>> usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> usb usb6: Product: UHCI Host Controller
>> usb usb6: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
>> usb usb6: SerialNumber: 0000:00:1d.1
>> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>> uhci_hcd 0000:00:1d.2: setting latency timer to 64
>> uhci_hcd 0000:00:1d.2: UHCI Host Controller
>> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>> uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
>> usb usb7: configuration #1 chosen from 1 choice
>> hub 7-0:1.0: USB hub found
>> hub 7-0:1.0: 2 ports detected
>> usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>> usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>> usb usb7: Product: UHCI Host Controller
>> usb usb7: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
>> usb usb7: SerialNumber: 0000:00:1d.2
>> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>> i8042.c: Detected active multiplexing controller, rev 1.1.
>> serio: i8042 KBD port at 0x60,0x64 irq 1
>> serio: i8042 AUX0 port at 0x60,0x64 irq 12
>> serio: i8042 AUX1 port at 0x60,0x64 irq 12
>> serio: i8042 AUX2 port at 0x60,0x64 irq 12
>> serio: i8042 AUX3 port at 0x60,0x64 irq 12
>> mice: PS/2 mouse device common for all mice
>> input: AT Translated Set 2 keyboard as
>> /devices/platform/i8042/serio0/input/input5
>> rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>> rtc0: alarms up to one month, y3k, hpet irqs
>> device-mapper: uevent: version 1.0.3
>> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
>> dm-devel em redhat.com
>> cpuidle: using governor ladder
>> cpuidle: using governor menu
>> Marking TSC unstable due to TSC halts in idle
>> usbcore: registered new interface driver hiddev
>> usbcore: registered new interface driver usbhid
>> usbhid: v2.6:USB HID core driver
>> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>> CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>> nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module
>> option or
>> sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>> ip_tables: (C) 2000-2006 Netfilter Core Team
>> TCP cubic registered
>> Initializing XFRM netlink socket
>> NET: Registered protocol family 17
>> registered taskstats version 1
>> Magic number: 1:189:442
>> Freeing unused kernel memory: 1296k freed
>> Write protecting the kernel read-only data: 4752k
>> input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6
>> input: AlpsPS/2 ALPS GlidePoint as
>> /devices/platform/i8042/serio4/input/input7
>> SGI XFS with ACLs, security attributes, large block/inode numbers, no
>> debug enabled
>> SGI XFS Quota Management subsystem
>> Clocksource tsc unstable (delta = -138901743 ns)
>> XFS mounting filesystem sda3
>> Ending clean XFS mount for filesystem: sda3
>> SELinux: 8192 avtab hash slots, 112805 rules.
>> SELinux: 8192 avtab hash slots, 112805 rules.
>> SELinux: 8 users, 11 roles, 2589 types, 121 bools, 1 sens, 1024 cats
>> SELinux: 73 classes, 112805 rules
>> SELinux: Completing initialization.
>> SELinux: Setting up existing superblocks.
>> SELinux: initialized (dev sda3, type xfs), uses xattr
>> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>> SELinux: initialized (dev selinuxfs, type selinuxfs), uses
>> genfs_contexts
>> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses
>> genfs_contexts
>> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>> SELinux: initialized (dev inotifyfs, type inotifyfs), uses
>> genfs_contexts
>> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>> SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
>> genfs_contexts
>> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>> SELinux: initialized (dev proc, type proc), uses genfs_contexts
>> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>> type=1403 audit(1238174648.220:2): policy loaded auid=4294967295
>> ses=4294967295
>> udevd version 127 started
>> usbcore: registered new interface driver usbserial
>> usbserial: USB Serial support registered for generic
>> usbcore: registered new interface driver usbserial_generic
>> usbserial: USB Serial Driver core
>> ACPI: AC Adapter [ACAD] (off-line)
>> ACPI: Battery Slot [BAT0] (battery present)
>> sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>> sky2 0000:04:00.0: setting latency timer to 64
>> sky2 0000:04:00.0: v1.22 addr 0xf4200000 irq 17 Yukon-2 EC Ultra rev 3
>> sky2 eth0: addr 00:14:0b:4d:d4:ae
>> acpi device:05: registered as cooling_device4
>> input: Video Bus as
>> /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input8
>> ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
>> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>> HDA Intel 0000:00:1b.0: setting latency timer to 64
>> hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
>> ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1
>> (0x14/0x0/0x0/0x0/0x0)
>> ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0
>> (0x0/0x0/0x0/0x0/0x0)
>> ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1
>> (0x15/0x0/0x0/0x0/0x0)
>> ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0
>> ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x0,
>> line=0x0, fline=0x0, cd=0x0, aux=0x0
>> iTCO_vendor_support: vendor-support=0
>> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>> iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>> Initializing USB Mass Storage driver...
>> i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>> ACPI: I/O resource 0000:00:1f.3 [0x1c20-0x1c3f] conflicts with ACPI
>> region SMBI [0x1c20-0x1c2f]
>> ACPI: Device needs an ACPI driver
>> input: PC Speaker as /devices/platform/pcspkr/input/input9
>> rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could
>> damage your
>> hardware, use at your own risk
>> phy0: Selected rate control algorithm 'pid'
>> phy0: hwaddr 00:22:43:27:b8:4c, RTL8187BvE V0 + rtl8225z2
>> usbcore: registered new interface driver rtl8187
>> scsi5 : SCSI emulation for USB Mass Storage devices
>> usb-storage: device found at 2
>> usb-storage: waiting for device to settle before scanning
>> usbcore: registered new interface driver usb-storage
>> USB Mass Storage support registered.
>> device-mapper: multipath: version 1.0.5 loaded
>> XFS mounting filesystem sda6
>> Ending clean XFS mount for filesystem: sda6
>> SELinux: initialized (dev sda6, type xfs), uses xattr
>> kjournald starting. Commit interval 5 seconds
>> EXT3 FS on sda2, internal journal
>> EXT3-fs: mounted filesystem with ordered data mode.
>> SELinux: initialized (dev sda2, type ext3), uses xattr
>> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>> usb-storage: device scan complete
>> scsi 5:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0
>> ANSI: 0 CCS
>> sd 5:0:0:0: [sdb] Attached SCSI removable disk
>> sd 5:0:0:0: Attached scsi generic sg2 type 0
>> Adding 2048248k swap on /dev/sda5. Priority:-1 extents:1
>> across:2048248k
>> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
>> genfs_contexts
>> IA-32 Microcode Update Driver: v1.14a <tigran em aivazian.fsnet.co.uk>
>> firmware: requesting intel-ucode/06-0f-0d
>> firmware: requesting intel-ucode/06-0f-0d
>> NET: Registered protocol family 10
>> lo: Disabled Privacy Extensions
>> ip6_tables: (C) 2000-2006 Netfilter Core Team
>> RPC: Registered udp transport module.
>> RPC: Registered tcp transport module.
>> SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses
>> genfs_contexts
>> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>> Bluetooth: Core ver 2.13
>> NET: Registered protocol family 31
>> Bluetooth: HCI device and connection manager initialized
>> Bluetooth: HCI socket layer initialized
>> Bluetooth: L2CAP ver 2.11
>> Bluetooth: L2CAP socket layer initialized
>> Bluetooth: SCO (Voice Link) ver 0.6
>> Bluetooth: SCO socket layer initialized
>> Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>> Bluetooth: BNEP filters: protocol multicast
>> Bridge firewalling registered
>> sky2 eth0: enabling interface
>> ADDRCONF(NETDEV_UP): eth0: link is not ready
>> ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> virbr0: starting userspace STP failed, starting kernel STP
>> SELinux: initialized (dev proc, type proc), uses genfs_contexts
>> Not cloning cgroup for unused subsystem ns
>> usbcore: deregistering interface driver usb-storage
>> usbcore: deregistering interface driver usbserial_generic
>> usbserial: USB Serial deregistering driver generic
>> usbcore: deregistering interface driver usbserial
>> usbcore: registered new interface driver usbserial
>> usbserial: USB Serial support registered for generic
>> usbcore: registered new interface driver usbserial_generic
>> usbserial: USB Serial Driver core
>> usbserial: USB Serial support registered for GSM modem (1-port)
>> usbcore: registered new interface driver option
>> option: USB Driver for GSM modems: v0.7.2
>> Initializing USB Mass Storage driver...
>> scsi6 : SCSI emulation for USB Mass Storage devices
>> usbcore: registered new interface driver usb-storage
>> USB Mass Storage support registered.
>> usb-storage: device found at 2
>> usb-storage: waiting for device to settle before scanning
>> [drm] Initialized drm 1.1.0 20060810
>> pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> pci 0000:00:02.0: setting latency timer to 64
>> [drm] Initialized i915 1.6.0 20080730 on minor 0
>> usb-storage: device scan complete
>> virbr0: no IPv6 routers present
>> usb 2-3: reset high speed USB device using ehci_hcd and address 2
>> scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0
>> ANSI: 0 CCS
>> sd 6:0:0:0: [sdb] Attached SCSI removable disk
>> sd 6:0:0:0: Attached scsi generic sg2 type 0
>> CPU0 attaching NULL sched-domain.
>> CPU1 attaching NULL sched-domain.
>> CPU0 attaching sched-domain:
>> domain 0: span 0-1 level MC
>> groups: 0 1
>> domain 1: span 0-1 level CPU
>> groups: 0-1
>> domain 2: span 0-1 level NODE
>> groups: 0-1
>> CPU1 attaching sched-domain:
>> domain 0: span 0-1 level MC
>> groups: 1 0
>> domain 1: span 0-1 level CPU
>> groups: 0-1
>> domain 2: span 0-1 level NODE
>> groups: 0-1
>> fuse init (API version 7.9)
>> SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>> CPU0 attaching NULL sched-domain.
>> CPU1 attaching NULL sched-domain.
>> CPU0 attaching sched-domain:
>> domain 0: span 0-1 level MC
>> groups: 0 1
>> domain 1: span 0-1 level CPU
>> groups: 0-1
>> domain 2: span 0-1 level NODE
>> groups: 0-1
>> CPU1 attaching sched-domain:
>> domain 0: span 0-1 level MC
>> groups: 1 0
>> domain 1: span 0-1 level CPU
>> groups: 0-1
>> domain 2: span 0-1 level NODE
>> groups: 0-1
>> usb 2-2: new high speed USB device using ehci_hcd and address 3
>> usb 2-2: configuration #1 chosen from 1 choice
>> usb-storage: device ignored
>> usb 2-2: New USB device found, idVendor=19d2, idProduct=2000
>> usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
>> usb 2-2: Product: ZTE CDMA Technologies MSM
>> usb 2-2: Manufacturer: ZTE,Incorporated
>> usb 2-2: SerialNumber: 1234567890ABCDEF
>> usb 6-2: new low speed USB device using uhci_hcd and address 2
>> usb 6-2: configuration #1 chosen from 1 choice
>> input: PS/2+USB Mouse as
>> /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input10
>> input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.1-2
>> usb 6-2: New USB device found, idVendor=04f3, idProduct=0210
>> usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>> usb 6-2: Product: PS/2+USB Mouse
>>
>>
>>
>> 2009/3/27 Isamar Maia <isamar em gmail.com>:
>>> Andre,
>>>
>>> Ao espetar o modem, envie o que vem como saida no o comando "dmesg"
>>> e envie tambem a saida do comando "lsusb"
>>>
>>>
>>> Isamar
>>>
>>>
>>> 2009/3/27 André Maurício <ammvaz em gmail.com>:
>>>> Alguém ja conseguiu ja conseguiu rodar a internet 3G com o modem ZTE
>>>> MF 636 (Brasiltelecom) no Fedora 10.
>>>>
>>>> Tenho acompanhado algumas listas e alguns usuários do ubuntu ja
>>>> tiveram sucesso. << http://ubuntuforum-br.org/index.php?topic=46918.0
>>>>>>
>>>>
>>>> Segui os passos indicados mas não nem consegui detectar o modem.
>>>>
>>>> Alguma dica?
>>>>
>>>> Já falei com a ZTE (China) não tem suporte
>>>>
>>>> Estou tentando com um usuário de fedora da Austrália. (A ZTE de lá
>>>> parece que tem um suporte para linux)
>>>>
>>>> Abraços
>>>>
>>>> --
>>>> André Maurício
>>>>
>>>> --
>>>> Fedora-users-br mailing list
>>>> Fedora-users-br em redhat.com
>>>> https://www.redhat.com/mailman/listinfo/fedora-users-br
>>>>
>>>
>>>
>>>
>>> --
>>> Isamar Maia
>>> Brazil: 55-71-9146-8575
>>> 55-71-8890-7870
>>> 日本: +81-(0)3-4550-1212
>>> "In a world without walls. Who needs windows and gates?"
>>>
>>>
>>> --
>>> Fedora-users-br mailing list
>>> Fedora-users-br em redhat.com
>>> https://www.redhat.com/mailman/listinfo/fedora-users-br
>>>
>>>
>>
>>
>>
>> --
>> André Maurício
>> ammvaz em gmail.com
>> +55 41 9234 3498
>> (o\ | /o)
>>
>>
>> --
>> Fedora-users-br mailing list
>> Fedora-users-br em redhat.com
>> https://www.redhat.com/mailman/listinfo/fedora-users-br
>>
>>
>
>
>
> --
> Isamar Maia
> Brazil: 55-71-9146-8575
> 55-71-8890-7870
> 日本: +81-(0)3-4550-1212
> "In a world without walls. Who needs windows and gates?"
>
>
> --
> Fedora-users-br mailing list
> Fedora-users-br em redhat.com
> https://www.redhat.com/mailman/listinfo/fedora-users-br
>
>
Mais detalhes sobre a lista de discussão Fedora-users-br