<div> </div>
<div>I need some feedback as to what could be the source of my wireless connectivity for FE-12.  Previously, there were some serious problems with the wireless network software as well as the user interface using FE-12.  In general, these issues have been corrected.  </div>

<div> </div>
<div>The problem I now see is dropped connections.  This could be due to failure to re-authenticate or something in the driver.  I mostly see this problem when connecting to a Linksys WRT160N.  However, once the problem is observed the FE-12 will not reconnect to any wireless router unless I logoff and then log back on.  Or, simply reboot the computer.</div>

<div> </div>
<div>It should be noted that the WRT160N has been plagued by software problems.  In fact, you can buy an entire new OS for these and many problems go away.  I using v3 the latest from Linksys for this device.  For the most part when I connect to a WRT54G I do not see these problems.  </div>

<div> </div>
<div>Scenario:</div>
<div>After bootup the computer will connect to the WRT160N and communicate as expected.  The longer I stayed connected the slower the response gets.  Eventually, when executing an "arp -a" command the system will return the MAC address with a <incomplete> instead of the IP address for the router.  The computer's IP address 192.168.1.100 and the router is 10.10.10.1.  At this point attempting to connect to a different router (WRT54G) does not work either.  Only a logout or reboot corrects the problem.  </div>

<div> </div>
<div>I am using WPA & WPA2 Personal authentication whereas the WRT54G uses WEP.  I am hesitant to file a bug report due to the possibility the root problem is not in FE-12.  However, the fact that the FE-12 network drive does not recover indicates something is not quite right.</div>

<div> </div>
<div>Thanks</div>
<div> </div>
<div>PJAL</div>