<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Yes, same results. I've tried 2.6.19.6.5 and all kernels up to current.
:(<br>
<br>
<br>
Frank Rosendahl wrote:
<blockquote cite="mid200704050642.27684.frank@rosendahl.dyndns.org"
type="cite">
<pre wrap="">Did you get the same results with the kernel 2.6.19.6.5?
Try to use this one because it seems the 2.6.20 is allways crashing (also on
my AMD 1000)
Am Donnerstag April 5 2007 schrieb George Shearer:
</pre>
<blockquote type="cite">
<pre wrap="">I can't seem to win.. with Xen... :-/
Ok, agp=no on the kernel command gets me past the agpgart crash listed
below. However... I am presented with another OOPS as soon as the kernel
in dom0 gets around to looking at my firewire-attached drives.
If I unplug my external firewire chassis, it actually completes booting
and everything seems ok.. However, the SECOND I plug my drives in, Xen
panics.. Here's the OOPS...
kernel BUG at lib/../arch/i386/kernel/swiotlb.c:394!
invalid opcode: 0000 [#1]
SMP
last sysfs file: /devices/pci0000:00/0000:00:00.0/irq
Modules linked in: sbp2 bridge netloop netbk blktap blkbk ipv6 dm_mirror
dm_mod raid1 raid0 video sb
s i2c_ec button battery asus_acpi ac parport_pc lp parport sg iTCO_wdt
ahci ide_cd ohci1394 i2c_i801
ieee1394 i2c_core cdrom serial_core pl2303 pcspkr sky2 usbserial floppy
ata_piix libata sd_mod scsi
_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
CPU: 0
EIP: 0061:[<c04ecaaf>] Not tainted VLI
EFLAGS: 00010082 (2.6.19-1.2911.6.5.fc6xen #1)
EIP is at sync_single+0x46/0x72
eax: 00000043 ebx: c0aef000 ecx: c32c6700 edx: f5416000
esi: 0000ffff edi: c1580040 ebp: 00000180 esp: ecbc8b08
ds: 007b es: 007b ss: 0069
Process modprobe (pid: 2680, ti=ecbc8000 task=c08729d0 task.ti=ecbc8000)
Stack: c0633172 c0647317 000007f8 c3c54800 c0aef000 0000ffff ece95c98
ec002080
eea6412e 00000000 00000000 00000024 c08729d0 00000000 ed6d8000
00000220
00011440 ec002000 c0832400 c74231f8 ecbc8b88 c061a5b2 c0832400
00000024
Call Trace:
[<eea6412e>] sbp2scsi_queuecommand+0x5d7/0x792 [sbp2]
[<ee065aa1>] scsi_dispatch_cmd+0x240/0x2be [scsi_mod]
[<ee06a4aa>] scsi_request_fn+0x27d/0x33a [scsi_mod]
[<c04da8b6>] __generic_unplug_device+0x1d/0x1f
[<c04da946>] blk_execute_rq_nowait+0x8e/0x9f
[<c04daa1f>] blk_execute_rq+0xc8/0xe5
[<ee069d75>] scsi_execute+0xdd/0xf1 [scsi_mod]
[<ee069e40>] scsi_execute_req+0xb7/0xd5 [scsi_mod]
[<ee06b251>] scsi_probe_and_add_lun+0x21c/0x93c [scsi_mod]
[<ee06c626>] __scsi_add_device+0x5d/0x7e [scsi_mod]
[<ee06c65f>] scsi_add_device+0x18/0x2a [scsi_mod]
[<eea637c6>] sbp2_probe+0x4ea/0x54f [sbp2]
[<c054c87c>] really_probe+0x39/0xda
[<c054cab3>] __driver_attach+0x73/0xab
[<c054bf8c>] bus_for_each_dev+0x37/0x59
[<c054c79f>] driver_attach+0x16/0x18
[<c054c25d>] bus_add_driver+0x61/0x165
[<ee19ca40>] hpsb_register_protocol+0xd/0x2f [ieee1394]
[<eea638aa>] sbp2_module_init+0x7f/0xa0 [sbp2]
[<c0439d2d>] sys_init_module+0x1806/0x19b1
[<c0404eff>] syscall_call+0x7/0xb
[<00959402>] 0x959402
=======================
Code: e0 03 03 05 4c 36 84 c0 8b 68 04 8b 38 8b 44 24 24 48 83 f8 01 76
1c c7 44 24 04 17 73 64 c0 c
7 04 24 72 31 63 c0 e8 52 1e f3 ff <0f> 0b 8a 01 4a 73 64 c0 8b 44 24 24
89 ea 8b 4c 24 0c 89 44 24
EIP: [<c04ecaaf>] sync_single+0x46/0x72 SS:ESP 0069:ecbc8b08
<3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
in_atomic():0, irqs_disabled():1
[<c0405703>] dump_trace+0x69/0x1b6
[<c0405868>] show_trace_log_lvl+0x18/0x2c
[<c0405e4f>] show_trace+0xf/0x11
[<c0405e7e>] dump_stack+0x15/0x17
[<c04332c2>] down_read+0x12/0x28
[<c042ad12>] blocking_notifier_call_chain+0xe/0x29
[<c0420dd1>] do_exit+0x1b/0x79b
[<c0405df0>] die+0x2af/0x2d4
[<c0406266>] do_invalid_op+0xa2/0xab
[<c061a783>] error_code+0x2b/0x30
[<c04ecaaf>] sync_single+0x46/0x72
[<eea6412e>] sbp2scsi_queuecommand+0x5d7/0x792 [sbp2]
[<ee065aa1>] scsi_dispatch_cmd+0x240/0x2be [scsi_mod]
[<ee06a4aa>] scsi_request_fn+0x27d/0x33a [scsi_mod]
[<c04da8b6>] __generic_unplug_device+0x1d/0x1f
[<c04da946>] blk_execute_rq_nowait+0x8e/0x9f
[<c04daa1f>] blk_execute_rq+0xc8/0xe5
[<ee069d75>] scsi_execute+0xdd/0xf1 [scsi_mod]
[<ee069e40>] scsi_execute_req+0xb7/0xd5 [scsi_mod]
[<ee06b251>] scsi_probe_and_add_lun+0x21c/0x93c [scsi_mod]
[<ee06c626>] __scsi_add_device+0x5d/0x7e [scsi_mod]
[<ee06c65f>] scsi_add_device+0x18/0x2a [scsi_mod]
[<eea637c6>] sbp2_probe+0x4ea/0x54f [sbp2]
[<c054c87c>] really_probe+0x39/0xda
[<c054cab3>] __driver_attach+0x73/0xab
[<c054bf8c>] bus_for_each_dev+0x37/0x59
[<c054c79f>] driver_attach+0x16/0x18
[<c054c25d>] bus_add_driver+0x61/0x165
[<ee19ca40>] hpsb_register_protocol+0xd/0x2f [ieee1394]
[<eea638aa>] sbp2_module_init+0x7f/0xa0 [sbp2]
[<c0439d2d>] sys_init_module+0x1806/0x19b1
[<c0404eff>] syscall_call+0x7/0xb
[<00959402>] 0x959402
=======================
BUG: spinlock lockup on CPU#0, swapper/0, ed6df034 (Not tainted)
[<c0405703>] dump_trace+0x69/0x1b6
[<c0405868>] show_trace_log_lvl+0x18/0x2c
[<c0405e4f>] show_trace+0xf/0x11
[<c0405e7e>] dump_stack+0x15/0x17
[<c04e992f>] _raw_spin_lock+0xbf/0xdc
[<c061a5b2>] _spin_lock_irqsave+0x12/0x17
[<ee0681ef>] scsi_eh_scmd_add+0x1f/0x78 [scsi_mod]
[<ee068293>] scsi_times_out+0x4b/0x63 [scsi_mod]
[<c0427bc3>] run_timer_softirq+0x105/0x16c
[<c0422ed5>] __do_softirq+0x5e/0xc3
[<c0406a3a>] do_softirq+0x59/0xca
=======================
George Shearer wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Hey All,
Attempting to run FC6-xen on my system. It's currently running
2.6.20-1.2933.fc6.i686 happily. However, the XEN kernel panics on
boot. I had to enable serial console in order to capture the dmesg for
troubleshooting. I'd like your opinion of this output.
Looks to me like it has something to do with agpgart. This is on a
Gigabyte GA-965P-DS3 motherboard (rev 1.0, bios F10), with a Conroe
E6400 and 4GB DDR2-800. ICH8 is the main northbridge, however, there's
also a JMB363 AHCI IDE controller as well.
A non-xen kernel agpgart section looks like this:
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 965G Chipset.
agpgart: AGP aperture is 256M @ 0x0
However, as you will see, in the boot text below, the xen-kernel
(dom0) seems to kernel panic right after this:
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 965G Chipset.
BUG: unable to handle kernel NULL pointer dereference at virtual
address 00000008
printing eip:
c04b81a0
.... cut
Thank you for your time.
__ __ _____ ___ _____ ___ __ __
\ \/ /___ _ __ |___ / / _ \ |___ / / _ \ / _| ___ / /_
\ // _ \ '_ \ |_ \| | | | |_ \ __| | | || |_ / __| '_ \
/ \ __/ | | | ___) | |_| | ___) |__| |_| || _| (__| (_) |
/_/\_\___|_| |_| |____(_)___(_)____/ \___(_)_| \___|\___/
<a class="moz-txt-link-freetext" href="http://www.cl.cam.ac.uk/netos/xen">http://www.cl.cam.ac.uk/netos/xen</a>
University of Cambridge Computer Laboratory
Xen version 3.0.3-0-1.2933.fc6 (<a class="moz-txt-link-abbreviated" href="mailto:brewbuilder@build.redhat.com">brewbuilder@build.redhat.com</a>) (gcc
version 4.1.1 20070105 (Red Hat
4.1.1-51)) Mon Mar 19 10:39:57 EDT 2007
Latest ChangeSet: unavailable
(XEN) Command line: /boot/xen.gz-2.6.20-1.2933.fc6 noreboot
com1=115200,8n1
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009f800 (usable)
(XEN) 000000000009f800 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfee0000 (usable)
(XEN) 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
(XEN) 00000000cfee3000 - 00000000cfef0000 (ACPI data)
(XEN) 00000000cfef0000 - 00000000cff00000 (reserved)
(XEN) 00000000e0000000 - 00000000e4000000 (reserved)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000130000000 (usable)
(XEN) System RAM: 4094MB (4192764kB)
(XEN) Xen heap: 9MB (10224kB)
(XEN) PAE enabled, limit: 16 GB
(XEN) found SMP MP-table at 000f5310
(XEN) DMI 2.4 present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 GBT ) @
0x000f6ca0
(XEN) ACPI: RSDT (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @
0xcfee3040
(XEN) ACPI: FADT (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @
0xcfee30c0
(XEN) ACPI: HPET (v001 GBT GBTUACPI 0x42302e31 GBTU 0x00000098) @
0xcfee7cc0
(XEN) ACPI: MCFG (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @
0xcfee7d40
(XEN) ACPI: MADT (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @
0xcfee7bc0
(XEN) ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20040311) @
0xcfee7dc0
(XEN) ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20040311) @
0xcfee8250
(XEN) ACPI: DSDT (v001 GBT GBTUACPI 0x00001000 MSFT 0x0100000c) @
0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
</pre>
</blockquote>
</blockquote>
<pre wrap=""><!---->
</pre>
<blockquote type="cite">
<blockquote type="cite">
<pre wrap="">(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 3200.037 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) Machine check exception polling timer started.
(XEN) mtrr: your CPUs had inconsistent variable MTRR settings
(XEN) mtrr: probably your BIOS does not setup all CPUs.
(XEN) mtrr: corrected configuration.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Domain 0 kernel supports features = { 0000001f }.
(XEN) Domain 0 kernel requires features = { 00000000 }.
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000007000000->0000000008000000 (999519 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0400000->c07fe000
(XEN) Init. ramdisk: c07fe000->c0b48200
(XEN) Phys-Mach map: c0b49000->c0f1d17c
(XEN) Start info: c0f1e000->c0f1e46c
(XEN) Page tables: c0f1f000->c0f2c000
(XEN) Boot stack: c0f2c000->c0f2d000
(XEN) TOTAL: c0000000->c1000000
(XEN) ENTRY ADDRESS: c0400000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Initrd len 0x34a200, start at 0xc07fe000
(XEN) Scrubbing Free RAM:
.................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen).
Linux version 2.6.20-1.2933.fc6xen
(<a class="moz-txt-link-abbreviated" href="mailto:brewbuilder@hs20-bc2-4.build.redhat.com">brewbuilder@hs20-bc2-4.build.redhat.com</a>) (gcc version 4.1.1 2007
0105 (Red Hat 4.1.1-51)) #1 SMP Mon Mar 19 12:00:20 EDT 2007
BIOS-provided physical RAM map:
sanitize start
sanitize bail 0
copy_e820_map() start: 0000000000000000 size: 00000000f585f000 end:
00000000f585f000 type: 1
Xen: 0000000000000000 - 00000000f585f000 (usable)
3200MB HIGHMEM available.
727MB LOWMEM available.
NX (Execute Disable) protection: active
Entering add_active_range(0, 0, 1005663) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 186366
Normal 186366 -> 186366
HighMem 186366 -> 1005663
early_node_map[1] active PFN ranges
0: 0 -> 1005663
On node 0 totalpages: 1005663
DMA zone: 1455 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 184911 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
HighMem zone: 6400 pages used for memmap
HighMem zone: 812897 pages, LIFO batch:31
found SMP MP-table at 000f5310
DMI 2.4 present.
ACPI: RSDP (v000 GBT ) @ 0x000f6ca0
ACPI: RSDT (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0xcfee3040
ACPI: FADT (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0xcfee30c0
ACPI: HPET (v001 GBT GBTUACPI 0x42302e31 GBTU 0x00000098) @ 0xcfee7cc0
ACPI: MCFG (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0xcfee7d40
ACPI: MADT (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0xcfee7bc0
ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20040311) @ 0xcfee7dc0
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20040311) @ 0xcfee8250
ACPI: DSDT (v001 GBT GBTUACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists. Total pages: 997808
Kernel command line: ro root=LABEL=/ noreboot console=ttyS0,115200n8
debug
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0784000 soft=c0764000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 3200.036 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: 0x00000000c3396000 - 0x00000000c7396000
vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
Memory: 3901868k/4022652k available (2132k kernel code, 111384k
reserved, 1129k data, 176k init, 327
7188k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xee000000 - 0xf4ffe000 ( 111 MB)
lowmem : 0xc0000000 - 0xed7fe000 ( 727 MB)
.init : 0xc0734000 - 0xc0760000 ( 176 kB)
.data : 0xc0615256 - 0xc072f794 (1129 kB)
.text : 0xc0400000 - 0xc0615256 (2132 kB)
Checking if this processor honours the WP bit even in supervisor
mode... Ok.
Calibrating delay using timer specific routine.. 8001.68 BogoMIPS
(lpj=16003363)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebd3f1 20100000 00000000 00000000
0000e3bd 00000000 00000001
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: bfebd3f1 20100000 00000000 00003940
0000e3bd 00000000 00000001
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU 1 irqstacks, hard=c0785000 soft=c0765000
ENABLING IO-APIC IRQs
SMP alternatives: switching to SMP code
Brought up 2 CPUs
Initializing CPU#1
sizeof(vma)=88 bytes
sizeof(page)=32 bytes
sizeof(inode)=420 bytes
sizeof(dentry)=144 bytes
sizeof(ext3inode)=596 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1408 bytes
migration_cost=10
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
Setting up standard PCI resources
Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
Boot video device is 0000:01:00.0
0000:05:00.0: cannot adjust BAR2 (not I/O)
0000:05:00.0: cannot adjust BAR3 (not I/O)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
(XEN) (file=io_apic.c, line=2067)
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000109f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
pnp: PnP ACPI: found 13 devices
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
a report
PCI: Cannot allocate resource region 2 of device 0000:05:00.0
PCI: Cannot allocate resource region 3 of device 0000:05:00.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: f2000000-f4ffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
IO window: 6000-6fff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:03:00.0
IO window: disabled.
MEM window: f5000000-f50fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: f5000000-f50fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: 7000-8fff
MEM window: f5100000-f51fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: 9000-9fff
MEM window: f0000000-f1ffffff
PREFETCH window: f5300000-f53fffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: e4000000-efffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:03:00.0 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3368k freed
IA-32 Microcode Update Driver: v1.14-xen <a class="moz-txt-link-rfc2396E" href="mailto:tigran@veritas.com"><tigran@veritas.com></a>
audit: initializing netlink socket (disabled)
audit(1175680668.712:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key A99AD4F3D245F54
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports 2 throttling states)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [
Cpu1Ist] [20060707]
ACPI: Processor [CPU1] (supports 2 throttling states)
ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device
is not present [20060707]
ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device
is not present [20060707]
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 965G Chipset.
BUG: unable to handle kernel NULL pointer dereference at virtual
address 00000008
printing eip:
c04b81a0
00f1f000 -> *pde = 00000000:07f20001
00f20000 -> *pme = 00000000:00000000
Oops: 0000 [#1]
SMP
last sysfs file:
Modules linked in:
CPU: 1
EIP: 0061:[<c04b81a0>] Not tainted VLI
EFLAGS: 00010246 (2.6.20-1.2933.fc6xen #1)
EIP is at inode_has_perm+0x4c/0x63
eax: c0fd2780 ebx: c0f16d38 ecx: 00000007 edx: 00000003
esi: 00000000 edi: c0f16d70 ebp: 00100000 esp: c0f16d28
ds: 007b es: 007b ss: 0069
Process (pid: 0, ti=c0f16000 task=ed7c1630 task.ti=c0f16000)
Stack: ed7c1630 c32aea88 c0fd2780 c0f16d38 00000001 00000000 00000000
00000000
c0b8cbfc 00000000 00000000 00000000 00000000 00000000 00000000
00000000
00000000 00000000 c06f3140 00000000 c0b8cbfc 00000001 c04bc519
00000000
Call Trace:
[<c04bc519>] selinux_inode_permission+0x9e/0xa3
[<c046c9bf>] permission+0xc8/0xdb
[<c046d764>] __lookup_hash+0x1f/0xe1
[<c046dbe5>] lookup_one_len+0x4a/0x58
[<c049e40a>] create_dir+0x37/0x196
[<c049ea15>] sysfs_create_dir+0x45/0x5f
[<c04dd4f9>] kobject_add+0xd7/0x18e
[<c04dd741>] kobject_set_name+0x2b/0x92
[<c0542fb8>] device_add+0x8b/0x484
[<c042dc6e>] init_waitqueue_head+0x12/0x20
[<c054343b>] device_create+0x7a/0x9a
[<c052c7ba>] misc_register+0x105/0x13b
[<c0539574>] agp_frontend_initialize+0x30/0x55
[<c0538dc5>] agp_add_bridge+0x29e/0x321
[<c04e86f8>] __pci_enable_device+0x20/0x25
[<c04e871a>] pci_enable_device+0x1d/0x2e
[<c053e6c6>] agp_intel_probe+0x4f2/0x553
[<c04ea88a>] pci_device_probe+0x36/0x57
[<c0544b5a>] really_probe+0x7f/0x103
[<c0544c22>] driver_probe_device+0x44/0xa5
[<c0417716>] __might_sleep+0x21/0xc1
[<c0544d11>] __driver_attach+0x0/0xab
[<c0544d84>] __driver_attach+0x73/0xab
[<c05441ac>] bus_for_each_dev+0x37/0x59
[<c0544a14>] driver_attach+0x16/0x18
[<c0544d11>] __driver_attach+0x0/0xab
[<c054447d>] bus_add_driver+0x61/0x165
[<c04ea9e6>] __pci_register_driver+0x73/0x9f
[<c04021d5>] init+0x1c1/0x370
[<c0404cc2>] ret_from_fork+0x6/0x1c
[<c0402014>] init+0x0/0x370
[<c0402014>] init+0x0/0x370
[<c0405173>] kernel_thread_helper+0x7/0x10
=======================
Code: 8d 44 24 10 b9 0e 00 00 00 89 44 24 0c 89 c7 89 d8 f3 ab c6 44
24 10 01 8d 5c 24 10 89 54 24 2
0 8b 44 24 08 0f b7 48 14 8b 50 10 <8b> 46 08 89 5c 24 04 89 2c 24 e8
38 f9 ff ff 83 c4 48 5b 5e 5f
EIP: [<c04b81a0>] inode_has_perm+0x4c/0x63 SS:ESP 0069:c0f16d28
<1>BUG: unable to handle kernel NULL pointer dereference at virtual
address 00000004
printing eip:
c04248aa
00f1f000 -> *pde = 00000000:07f20001
00f20000 -> *pme = 00000000:00000000
Oops: 0002 [#2]
SMP
last sysfs file:
Modules linked in:
CPU: 1
EIP: 0061:[<c04248aa>] Not tainted VLI
EFLAGS: 00010086 (2.6.20-1.2933.fc6xen #1)
EIP is at run_timer_softirq+0xb8/0x164
eax: 00000000 ebx: c0765fd0 ecx: ed7c45e8 edx: ed7c4600
esi: ed7c4000 edi: 0000000a ebp: 00000001 esp: c0765fc0
ds: 007b es: 007b ss: 0069
Process (pid: 0, ti=c0765000 task=ed7c1630 task.ti=c0f16000)
Stack: c06e8200 c06e8200 c042bbad c32b737c 00000000 c0765fd0 00000031
c071b108
0000000a 00000001 c0421c20 c0f16b74 c0f16000 00000001 ffffffff
c04067a2
Call Trace:
[<c042bbad>] __rcu_process_callbacks+0xe1/0x16a
[<c0421c20>] __do_softirq+0x61/0xc2
[<c04067a2>] do_softirq+0x5d/0xc6
[<c041dec3>] printk+0x1f/0xa1
[<c0441c1d>] handle_level_irq+0x0/0xdf
[<c04068d1>] do_IRQ+0xc6/0xdd
[<c0548cf5>] evtchn_do_upcall+0x5f/0x97
[<c0404ff2>] hypervisor_callback+0x46/0x50
[<c0548630>] force_evtchn_callback+0xa/0xc
[<c0405ac3>] die+0x19e/0x22f
[<c061326f>] do_page_fault+0xab1/0xc2e
[<c0403f48>] __switch_to+0x34e/0x3be
[<c0403f48>] __switch_to+0x34e/0x3be
[<c06127be>] do_page_fault+0x0/0xc2e
[<c061162d>] error_code+0x35/0x3c
[<c04b81a0>] inode_has_perm+0x4c/0x63
[<c04bc519>] selinux_inode_permission+0x9e/0xa3
[<c046c9bf>] permission+0xc8/0xdb
[<c046d764>] __lookup_hash+0x1f/0xe1
[<c046dbe5>] lookup_one_len+0x4a/0x58
[<c049e40a>] create_dir+0x37/0x196
[<c049ea15>] sysfs_create_dir+0x45/0x5f
[<c04dd4f9>] kobject_add+0xd7/0x18e
[<c04dd741>] kobject_set_name+0x2b/0x92
[<c0542fb8>] device_add+0x8b/0x484
[<c042dc6e>] init_waitqueue_head+0x12/0x20
[<c054343b>] device_create+0x7a/0x9a
[<c052c7ba>] misc_register+0x105/0x13b
[<c0539574>] agp_frontend_initialize+0x30/0x55
[<c0538dc5>] agp_add_bridge+0x29e/0x321
[<c04e86f8>] __pci_enable_device+0x20/0x25
[<c04e871a>] pci_enable_device+0x1d/0x2e
[<c053e6c6>] agp_intel_probe+0x4f2/0x553
[<c04ea88a>] pci_device_probe+0x36/0x57
[<c0544b5a>] really_probe+0x7f/0x103
[<c0544c22>] driver_probe_device+0x44/0xa5
[<c0417716>] __might_sleep+0x21/0xc1
[<c0544d11>] __driver_attach+0x0/0xab
[<c0544d84>] __driver_attach+0x73/0xab
[<c05441ac>] bus_for_each_dev+0x37/0x59
[<c0544a14>] driver_attach+0x16/0x18
[<c0544d11>] __driver_attach+0x0/0xab
[<c054447d>] bus_add_driver+0x61/0x165
[<c04ea9e6>] __pci_register_driver+0x73/0x9f
[<c04021d5>] init+0x1c1/0x370
[<c0404cc2>] ret_from_fork+0x6/0x1c
[<c0402014>] init+0x0/0x370
[<c0402014>] init+0x0/0x370
[<c0405173>] kernel_thread_helper+0x7/0x10
=======================
Code: 85 c0 75 13 8b 4e 14 8d 96 18 0e 00 00 89 f0 c1 e9 1a e8 12 ff
ff ff ff 46 14 8d 0c de 8b 41 1
8 8d 51 18 8d 5c 24 10 89 44 24 10 <89> 58 04 8b 42 04 89 44 24 14 89
18 89 52 04 89 51 18 eb 66 8b
EIP: [<c04248aa>] run_timer_softirq+0xb8/0x164 SS:ESP 0069:c0765fc0
<0>Kernel panic - not syncing: Fatal exception in interrupt
BUG: warning at arch/i386/kernel/smp-xen.c:530/smp_call_function()
(Not tainted)
[<c040f1fe>] smp_call_function+0x67/0x108
[<c040f2ba>] smp_send_stop+0x1b/0x26
[<c041d3d5>] panic+0x4d/0x190
[<c0405b20>] die+0x1fb/0x22f
[<c061326f>] do_page_fault+0xab1/0xc2e
[<c041732d>] enqueue_task+0x29/0x39
[<c0417588>] __activate_task+0x1c/0x29
[<c06114ff>] _spin_unlock_irqrestore+0x8/0x16
[<c0418c85>] try_to_wake_up+0x344/0x34e
[<c06127be>] do_page_fault+0x0/0xc2e
[<c061162d>] error_code+0x35/0x3c
[<c04248aa>] run_timer_softirq+0xb8/0x164
[<c042bbad>] __rcu_process_callbacks+0xe1/0x16a
[<c0421c20>] __do_softirq+0x61/0xc2
[<c04067a2>] do_softirq+0x5d/0xc6
[<c041dec3>] printk+0x1f/0xa1
[<c0441c1d>] handle_level_irq+0x0/0xdf
[<c04068d1>] do_IRQ+0xc6/0xdd
[<c0548cf5>] evtchn_do_upcall+0x5f/0x97
[<c0404ff2>] hypervisor_callback+0x46/0x50
[<c0548630>] force_evtchn_callback+0xa/0xc
[<c0405ac3>] die+0x19e/0x22f
[<c061326f>] do_page_fault+0xab1/0xc2e
[<c0403f48>] __switch_to+0x34e/0x3be
[<c0403f48>] __switch_to+0x34e/0x3be
[<c06127be>] do_page_fault+0x0/0xc2e
[<c061162d>] error_code+0x35/0x3c
[<c04b81a0>] inode_has_perm+0x4c/0x63
[<c04bc519>] selinux_inode_permission+0x9e/0xa3
[<c046c9bf>] permission+0xc8/0xdb
[<c046d764>] __lookup_hash+0x1f/0xe1
[<c046dbe5>] lookup_one_len+0x4a/0x58
[<c049e40a>] create_dir+0x37/0x196
[<c049ea15>] sysfs_create_dir+0x45/0x5f
[<c04dd4f9>] kobject_add+0xd7/0x18e
[<c04dd741>] kobject_set_name+0x2b/0x92
[<c0542fb8>] device_add+0x8b/0x484
[<c042dc6e>] init_waitqueue_head+0x12/0x20
[<c054343b>] device_create+0x7a/0x9a
[<c052c7ba>] misc_register+0x105/0x13b
[<c0539574>] agp_frontend_initialize+0x30/0x55
[<c0538dc5>] agp_add_bridge+0x29e/0x321
[<c04e86f8>] __pci_enable_device+0x20/0x25
[<c04e871a>] pci_enable_device+0x1d/0x2e
[<c053e6c6>] agp_intel_probe+0x4f2/0x553
[<c04ea88a>] pci_device_probe+0x36/0x57
[<c0544b5a>] really_probe+0x7f/0x103
[<c0544c22>] driver_probe_device+0x44/0xa5
[<c0417716>] __might_sleep+0x21/0xc1
[<c0544d11>] __driver_attach+0x0/0xab
[<c0544d84>] __driver_attach+0x73/0xab
[<c05441ac>] bus_for_each_dev+0x37/0x59
[<c0544a14>] driver_attach+0x16/0x18
[<c0544d11>] __driver_attach+0x0/0xab
[<c054447d>] bus_add_driver+0x61/0x165
[<c04ea9e6>] __pci_register_driver+0x73/0x9f
[<c04021d5>] init+0x1c1/0x370
[<c0404cc2>] ret_from_fork+0x6/0x1c
[<c0402014>] init+0x0/0x370
[<c0402014>] init+0x0/0x370
[<c0405173>] kernel_thread_helper+0x7/0x10
=======================
(XEN) Domain 0 crashed: 'noreboot' set - not rebooting.
--
Fedora-xen mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Fedora-xen@redhat.com">Fedora-xen@redhat.com</a>
<a class="moz-txt-link-freetext" href="https://www.redhat.com/mailman/listinfo/fedora-xen">https://www.redhat.com/mailman/listinfo/fedora-xen</a>
</pre>
</blockquote>
<pre wrap="">--
Fedora-xen mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Fedora-xen@redhat.com">Fedora-xen@redhat.com</a>
<a class="moz-txt-link-freetext" href="https://www.redhat.com/mailman/listinfo/fedora-xen">https://www.redhat.com/mailman/listinfo/fedora-xen</a>
</pre>
</blockquote>
<pre wrap=""><!---->
</pre>
<pre wrap="">
<hr size="4" width="90%">
--
Fedora-xen mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Fedora-xen@redhat.com">Fedora-xen@redhat.com</a>
<a class="moz-txt-link-freetext" href="https://www.redhat.com/mailman/listinfo/fedora-xen">https://www.redhat.com/mailman/listinfo/fedora-xen</a></pre>
</blockquote>
</body>
</html>