<div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><div class="gmail_quote"><div class="gmail_quote">Hi, I am working on x86_64 amd opetron cluster which runs fc5. I wanted to install the older version of Xen i.e xen 3.0-testing.hg for academic purposes. I wanted to compile the xen kernel with debug info. Hence I tried to compile it from source. It compiled successfully and I made corresponding entries to the grub.conf file. Is there any rpm package for xen with debug info available on fc5 for x86_64 ?</div> <div class="gmail_quote">Please let me know. For now directly compiling from the source gives the following error:</div><div class="gmail_quote"> root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /xen-3.0.2-3.gz console=com2,vga com2=19200,8n1 sync_console [Multiboot-elf, <0x100000:0xed530:0x39ad0>, shtab=0x227078, entry=0x100000] [0H0000] [06;00 __ __ _____ ___ ____ _____ .</div></div></blockquote><div> .</div><div> .</div> <div> (XEN) 3... 2... 1...</div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><div class="gmail_quote"><div class="gmail_quote">(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). kernel direct mapping tables up to f087e000 @ ea2000-ea2000 Bootdata ok (command line is ro root=LABEL=/ console=ttyS1,19200n8 3 selinux=0) Linux version 2.6.16.13-xen (root@opt13) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-3)) #1 SMP Thu Nov 20 21:45:06 EST 2008 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xfebff000] gsi_base[24]) IOAPIC[1]: apic_id 5, version 17, address 0xfebff000, GSI 24-27 ACPI: IOAPIC (id[0x06] address[0xfebfe000] gsi_base[28]) IOAPIC[2]: apic_id 6, version 17, address 0xfebfe000, GSI 28-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Setting APIC routing to xen Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at fc400000 (gap: fc000000:3780000) Built 1 zonelists Kernel command line: ro root=LABEL=/ console=ttyS1,19200n8 3 selinux=0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) Xen reported: 1793.340 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: 0xffff8800058d1000 - 0xffff8800098d1000 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 3783548k/3940856k available (2415k kernel code, 148460k reserved, 904k data, 164k init) Calibrating delay using timer specific routine.. 3588.10 BogoMIPS (lpj=17940514) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Initializing CPU#1 Initializing CPU#2 Brought up 4 CPUs Initializing CPU#3 migration_cost=309 checking if image is initramfs... it is Freeing initrd memory: 2177k freed DMI 2.3 present. Grant table initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) xen_mem: Initialising balloon driver. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:06.0 IO window: 9000-bfff MEM window: fc900000-feafffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0a.0 IO window: disabled. MEM window: fc800000-fc8fffff PREFETCH window: ff500000-ff5fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. IA-32 Microcode Update Driver: v1.14-xen <<a href="mailto:tigran@veritas.com" target="_blank">tigran@veritas.com</a>> IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: MSI quirk detected. pci_msi_quirk set. PCI: MSI quirk detected. pci_msi_quirk set. Real Time Clock Driver v1.12ac serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 isa bounce pool size: 16 pages RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Xen virtual console successfully installed as ttyS0 Event-channel device installed. blkif_init: reqs=64, pages=704, mmap_vstart=0xffff8800ef800000 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 0000:00:07.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hdc: SR244W, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbmon: debugfs is not available usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Red Hat nash version 5.0.32 startinginput: AT Translated Set 2 keyboard as /class/input/input0 Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Loading sata_sil.ko module GSI 16 sharing vector 0x98 and IRQ 16 ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 19 (level, low) -> IRQ 16 ata1: SATA max UDMA/100 cmd 0xFFFFC20000004C80 ctl 0xFFFFC20000004C8A bmdma 0xFFFFC20000004C00 irq 16 ata2: SATA max UDMA/100 cmd 0xFFFFC20000004CC0 ctl 0xFFFFC20000004CCA bmdma 0xFFFFC20000004C08 irq 16 ata3: SATA max UDMA/100 cmd 0xFFFFC20000004E80 ctl 0xFFFFC20000004E8A bmdma 0xFFFFC20000004E00 irq 16 ata4: SATA max UDMA/100 cmd 0xFFFFC20000004EC0 ctl 0xFFFFC20000004ECA bmdma 0xFFFFC20000004E08 irq 16 ata1: SATA link up 1.5 Gbps (SStatus 113) ata1: dev 0 ATA-7, max UDMA/133, 156301488 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : sata_sil ata2: SATA link down (SStatus 0) scsi1 : sata_sil ata3: SATA link down (SStatus 0) scsi2 : sata_sil ata4: SATA link down (SStatus 0) scsi3 : sata_sil Vendor: ATA Model: WDC WD800JD-22LS Rev: 06.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: Attached scsi disk sda Loading jbd.ko module Loading ext3.ko module Creating root device. Mounting root filesystem. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys INIT: version 2.86 booting Welcome to Fedora Core Press 'I' to enter interactive startup. Setting clock (localtime): Thu Nov 27 22:38:38 EST 2008 [ OK ] Starting udev: general protection fault: 0000 [1] SMP CPU 1 Modules linked in: tg3 i2c_core ext3 jbd sata_sil Pid: 457, comm: modprobe Not tainted 2.6.16.13-xen #1 RIP: e030:[<ffffffff801c4332>] <ffffffff801c4332>{create_dir+34} RSP: e02b:ffff8800ef3cfc28 EFLAGS: 00010296 RAX: ffffffff88039010 RBX: ffff8800efd12400 RCX: ffff8800ef3cfc60 RDX: ffff8800efd12400 RSI: 90666690666666c3 RDI: ffff8800efd123f8 RBP: ffff8800efd123f8 R08: 00000000fffffffe R09: ffff8800eff2b889 R10: ffff8800efd12000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8800efd123e8 R14: ffffffff88039010 R15: ffffffff804049e0 FS: 00002b49a3774210(0000) GS:ffffffff804a9080(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 Process modprobe (pid: 457, threadinfo ffff8800ef3ce000, task ffff8800efcc09b0) Stack: ffff8800efd123f8 ffff8800efd123e8 0000000000000000 ffff8800efd123e8 ffffffff88039010 ffffffff801c4b28 ffffffff88039010 0000000000000000 ffff8800efd123f8 ffffffff801f52ea Call Trace: <ffffffff88039010>{:tg3:tg3_disable_ints+0} <ffffffff801c4b28>{sysfs_create_dir+88} <ffffffff88039010>{:tg3:tg3_disable_ints+0} <ffffffff801f52ea>{kobject_add+234} <ffffffff88039000>{:tg3:tg3_write32+0} <ffffffff80251cf9>{class_device_add+185} <ffffffff802f72d1>{netdev_register_sysfs+81} <ffffffff802ed2d2>{netdev_run_todo+242} <ffffffff802ec634>{register_netdev+100} <ffffffff88044b07>{:tg3:tg3_init_one+3175} <ffffffff801297f3>{__wake_up+67} <ffffffff80204269>{pci_device_probe+89} <ffffffff80250d75>{driver_probe_device+101} <ffffffff80250e50>{__driver_attach+0} <ffffffff80250eb0>{__driver_attach+96} <ffffffff80250e50>{__driver_attach+0} <ffffffff80250619>{bus_for_each_dev+73} <ffffffff802501f8>{bus_add_driver+136} <ffffffff802044d0>{__pci_register_driver+128} <ffffffff8014fdd2>{sys_init_module+258} <ffffffff8010b2fe>{system_call+134} <ffffffff8010b278>{system_call+0} Code: 48 8b 7e 10 49 89 cc 49 89 f6 48 81 c7 c0 00 00 00 e8 88 33 RIP <ffffffff801c4332>{create_dir+34} RSP <ffff8800ef3cfc28> udevd-event[456]: run_program: '/sbin/modprobe' abnormal exit eepro100.c:v1.09j-t 9/29/99 Donald Becker <a href="http://www.scyld.com/network/eepro100.html" target="_blank">http://www.scyld.com/network/eepro100.html</a> eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <<a href="mailto:saw@saw.sw.com.sg" target="_blank">saw@saw.sw.com.sg</a>> and others sd 0:0:0:0: Attached scsi generic sg0 type 0 Unable to handle kernel paging request at ffffffff8807c000 RIP: Please let me know if I have apply any FC5 related patches to the xen source. Please help. Thanks, Aditya Graduate student <a href="mailto:princeofporsche@gmail.com" target="_blank">princeofporsche@gmail.com</a> </div> </div> </blockquote></div>