[K12OSN] Who completed ltsp-build-client with ltsp-release-5-9.el6.noarch?
Joshua Trimm
enslaver at enslaver.com
Thu Jun 20 15:25:10 UTC 2013
Send me over the logs you have to my email, run this command and attach
the /tmp/results.tar.gz file:
# tar -czvf /tmp/results.tar.gz /opt/ltsp/mock/*/result
On 6/20/13 10:17 AM, Radek Bursztynowski wrote:
> Jashua,
>
> I used your advice, all steps (yum clean all, rm -rf /opt/ltsp/mock/epel-*, yum update, ltsp-serverltsp-build-client --release epel-6-i386 --debug --noprogress).
> I installed version 5.4.5-23. Still the same.
>
> I enclose debug recordnig below.
>
> Best regards,
> Radek
>
> [root at passoa install]# ltsp-build-client --release epel-6-i386 --debug --noprogress
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/common/001-load-configuration-file
> DEBUG: Loading configuration file '/etc/ltsp/ltsp-build-client.conf'.
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/common/001-set-arch
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/common/001-set-exclude
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/005-warn
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/007-dialog
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/009-mock-chroot
> mockbuild:x:1005:1005::/home/mockbuild:/bin/bash
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/010-etc-hosts
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/010-etc-mtab
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/010-mount-proc
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/common/010-set-base
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/common/010-set-chroot
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/010-set-resolver
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/020-cleanup-chroot
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/020-rootpath
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/030-fat-client
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/common/030-update-sshkeys
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/032-chroot-setup
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/035-update-kernels
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/common/091-unmount-dirs
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/095-rootpass
> DEBUG: Loading plugin: configure: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/999-end
> DEBUG: Loading plugins in MODE=before-install:
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/common/000-check-paths
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/common/000-enable-debug
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/common/001-load-configuration-file
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/common/001-set-arch
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/common/001-set-exclude
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/005-warn
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/007-dialog
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/009-mock-chroot
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/010-etc-hosts
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/010-etc-mtab
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/010-mount-proc
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/common/010-set-base
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/common/010-set-chroot
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/010-set-resolver
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/020-cleanup-chroot
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/020-rootpath
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/030-fat-client
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/common/030-update-sshkeys
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/032-chroot-setup
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/035-update-kernels
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/common/091-unmount-dirs
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/095-rootpass
> DEBUG: Loading plugin: before-install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/999-end
> DEBUG: Loading plugins in MODE=install:
> DEBUG: Loading plugin: install: /usr/share/ltsp/plugins/ltsp-build-client/common/000-check-paths
> DEBUG: Loading plugin: install: /usr/share/ltsp/plugins/ltsp-build-client/common/000-enable-debug
> DEBUG: Loading plugin: install: /usr/share/ltsp/plugins/ltsp-build-client/common/001-load-configuration-file
> DEBUG: Loading plugin: install: /usr/share/ltsp/plugins/ltsp-build-client/common/001-set-arch
> DEBUG: Loading plugin: install: /usr/share/ltsp/plugins/ltsp-build-client/common/001-set-exclude
> DEBUG: Loading plugin: install: /usr/share/ltsp/plugins/ltsp-build-client/RHEL/005-warn
>
>
>
>
>
> A good way to debug the ltsp-build-client is by using the debug and
> noprogress flags, that way you can watch it as it goes:
>
>
>
> i.e.
>
>
>
> $ ltsp-build-client --release epel-6-i386 --debug --noprogress
>
>
>
> I am pushing version 5.4.5-23 out to the servers now, the most
> common issue people have with the build-client is the cache from
> yum, to ensure a clean install be sure you run:
>
>
>
> yum clean all
>
> rm -rf /opt/ltsp/mock/epel-*
>
> yum update ltsp-server
>
>
>
> Before you build your chroot environment.
>
>
>
>
>
> On 6/20/13 7:48 AM, Johan Vermeulen wrote:
>
>
>
>
> Radek,
>
>
>
> last week, a ran ltsp-build-client 3t times with success, on
> Centos 6.4 x86_64
>
>
>
> [root at centoshofkwartier network-scripts]# uname -a
>
> Linux centoshofkwartier 2.6.32-358.11.1.el6.x86_64 #1 SMP Wed
> Jun 12 03:34:52 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
>
>
>
> ltsp-server-5.4.5-21.el6.x86_64
>
> ltspfs-1.1-7.el6.x86_64
>
> ltsp-release-5-9.el6.noarch
>
>
>
> but today it didn't work for me either....
>
>
>
> Op 20-06-13 14:42, Radek
> Bursztynowski schreef:
>
>
> Hello again,
>
>
>
> Thanks to Johan who support me with my troubles.
>
>
>
> Is there anybody who completed ltsp-build-client with CentOS 6.4
> x86_64 and ltsp-release-5-9.el6.noarch?
>
>
>
> I try with ltsp-build-client --release fedora-18-i386 --chroot
> fed-18
>
> an after few seconds I can see:
>
>
>
> Error encountered running command: setarch i386 /usr/bin/mock -r
> fedora-18-i386 --target=i386
> --configdir=/etc/ltsp/mock --arch=i386 --init
>
> check /opt/ltsp/mock/fedora-18-i386/result/root.log for more
>
> detailed information
>
>
>
> I checked /opt/ltsp/mock/fedora-18-i386/result/root.log and
> there is:
>
>
>
> (...)
>
> DEBUG util.py:264: http://ltsprepo.s3.amazonaws.com/rpm/fc18/i386/repodata/repomd.xml:
> [Errno 14] PYCURL ERROR 22 - "The requested URL returned error:
> 404"
>
> DEBUG util.py:264: Trying other mirror.
>
> DEBUG util.py:264: Warning: Group Base does not exist.
>
> DEBUG util.py:354: Child return code was: 0
>
> (....)
>
>
>
>
>
> When I execute ltsp-build-client (with no options, so I
> understand like ltsp-build-client --release epel-6-i386 --chroot
> epel-6-i386), so I can find inside
> /opt/ltsp/mock/epel-6-i386/result/root.log
>
>
>
> (..)
>
> DEBUG util.py:264: http://ltsprepo.s3.amazonaws.com/rpm/el6/i386/repodata/repomd.xml:
> [Errno 14] PYCURL ERROR 22 - "The requested URL returned error:
> 404"
>
> DEBUG util.py:264: Trying other mirror.
>
> (..)
>
>
>
> Last rows inside root.log in both examples are:
>
>
>
> (..)
>
> DEBUG util.py:314: Executing command: ['/bin/umount', '-n',
> '-l', '/opt/ltsp/mock/epel-6-i386/root/proc'] with env {'LANG':
> 'pl_PL.UTF-8', 'TERM': 'vt100', 'SHELL': '/bin/bash',
> 'HOSTNAME': 'mock', 'HOME': '/builddir', 'PATH':
> '/usr/bin:/bin:/usr/sbin:/sbin'}
>
> DEBUG util.py:354: Child return code was: 0
>
> DEBUG util.py:116: kill orphans
>
>
>
> I touch the wall. Has anybody any idea to help me?
>
>
>
> Best regards,
>
> Radek
>
>
>
>
>
>
>
>
> _______________________________________________
> K12OSN mailing list
> K12OSN at redhat.com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
>
>
>
>
>
>
>
>
> _______________________________________________
> K12OSN mailing list
> K12OSN at redhat.com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
>
>
>
>
>
>
> _______________________________________________
> K12OSN mailing list
> K12OSN at redhat.com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>;
>
> _______________________________________________
> K12OSN mailing list
> K12OSN at redhat.com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
More information about the K12OSN
mailing list