<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.0.10">
</HEAD>
<BODY>
I've gotten myself a new server w/ 4 250 Gig SATA drives, all of which are in a hot-swap bay. 3 of the drives are a raid mirror (no spares), so I can remove a drive each week (This is my backup server). I use software raid, and have successfully failed the drives, and used the echo "scsi remove-single-device 1 0 0 0" > /proc/scsi/scsi format to remove and of course add new drives. However, the new drive typically does not become say /dev/sdb again, it takes /dev/sde... any help on controlling this?<BR>
<BR>
Henry
</BODY>
</HTML>