My ip adress of the server = <a href="http://192.168.0.10">192.168.0.10</a><br>Gateway = <a href="http://255.255.255.0">255.255.255.0</a><br>Hostname = I dont have a clue --> i took default<br>DNS = <a href="http://192.168.0.10">
192.168.0.10</a><br><br>So can somebody fill it in because I dont understand it.<br><br><br><br>allow booting;<br>allow bootp;<br>ddns-update-style none;<br><br>default-lease-time 21600;<br>max-lease-time 21600;
<br><br>option subnet-mask <a href="http://255.255.255.0">255.255.255.0</a>;<br>option broadcast-address <a href="http://192.168.0.255">192.168.0.255</a>;<br>option routers <a href="http://192.168.0.1">
192.168.0.1</a>;<br>option domain-name-servers <a href="http://192.168.0.1">192.168.0.1</a>;<br>option domain-name "<a href="http://server.be">server.be</a>"; # <--Fix this domain name<br>
next-server <a href="http://192.168.0.1">192.168.0.1</a>;<br>option root-path "192.168.0.1:/opt/ltsp/i386";<br><br>option option-128 code 128 = string;<br>option option-129 code 129 = text;<br><br>subnet
<a href="http://192.168.0.0">192.168.0.0</a> netmask <a href="http://255.255.255.0">255.255.255.0</a> {<br> use-host-decl-names on;<br> option log-servers <a href="http://192.168.0.1">192.168.0.1</a>;<br>
<br><br>##<br>## If you want to use static IP address for your workstations, then un-comment<br>## the following section and modify to suit your network.<br>## Then, duplicate this section for each workstation that needs a static
<br>## IP address.<br>##<br> host ws001 {<br> hardware ethernet 44:4D:50:E1:15:A6;<br> fixed-address <a href="http://192.168.0.2">192.168.0.2</a>;<br> filename "/lts/2.6.9-ltsp-3/pxelinux.0";
<br> }<br><br>##<br>## If you want to use a dynamic pool of addresses, then un-comment the following<br>## lines and modify to match your network.<br>##<br>## subnet <a href="http://192.168.0.0">192.168.0.0</a> netmask
<a href="http://255.255.255.0">255.255.255.0</a> {<br>## range dynamic-bootp <a href="http://192.168.0.1">192.168.0.1</a> <a href="http://192.168.0.253">192.168.0.253</a>;<br>## }<br>##<br><br>}<br><br>#<br># If you need to pass parameters on the kernel command line, you can
<br># do it with option-129. In order for Etherboot to look at option-129,<br># you MUST have option-128 set to a specific value. The value is a<br># special Etherboot signature of 'e4:45:74:68:00:00'.<br>#<br># Add these two lines to the host entry that needs kernel parameters
<br>#<br># option option-128 e4:45:74:68:00:00; # NOT a mac address<br># option option-129 "NIC=ne IO=0x300";<br>#<br><br>