Wonderful! I'll give this a try and let you know. Thanks! Barry Cisna <brcisna@eazylivin.net> wrote:<blockquote class="replbq" style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;"> Hi Kevin, Is your new server a two nic server setup? If so, how about keeping your existing Winders dhcp server " as is" and running your K12LTSP/eth0 nic, on port 1067, to " hide "it from the Winders machines? This way you can run 506 machines on the same subnet if you want to without even doing any vlan hocus pocus:) It is easy to setup your K12LTSP server to operate on port 1067 for dishing dhcp to " just" your thin clients. What medium are you using to boot? if you are using PXE via the onboard nics , for example this option would be too much of a hassle for you though. You can also setup in your /etc/dhcp-k12ltsp.conf file to specify your Winders dhcp server ip address at next-server xxx.xxx.xxx.xxx; # simply enter your winders dhcp server here then in a bash terminal do a ' server dhcpd restart' Let us know. Take Care, Barry Cisna _______________________________________________ K12OSN mailing list K12OSN@redhat.com https://www.redhat.com/mailman/listinfo/k12osn For more info see <http: www.k12os.org=""> </http:></blockquote>