On 10/13/07, Morten Gausland <<a href="mailto:morten@gmail.com">morten@gmail.com</a>> wrote:<div><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"> Have just done my first K12LTSP installation. Before asking a question, let me explain what I've done so far: 1. Installed K12LTSP version 6 accepting all defaults on a Netfinity 5600 with 2 NICs. 2. Connected a hub and an old PC to eth0 and network-booted the PC. Got login, and all worked fine. 3. Connected my Windows Vista PC to the above mentioned HUB, and opened a VNC (ultraVNC) session on <a href="http://192.168.0.254:0"> 192.168.0.254:0</a>. This also worked fine. 4. Since my existing network (and most private networks using ADSL internet connection) is using the 192.168 subnet, I wanted to change the default subnet used by eth0 (LTSP). I changed all the files mentioned in the ONE NIC portion of the Installation guide to use the 10.0 subnet, and connected the eth1 card to my existing 192.168 that is connected to internet via router with a dhcp server. Again I was able to network boot my old PC, and all worked fine. Internet now works on the terminal. So far so good!!!! Now my question (probably first in a series): I would like to connect to the server via vnc using xinetd (so without starting the vnc-server) from my Vista PC connected to the 192.168 subnet (so it would need to connect to the K12LTSP server on eth1). I have tried playing around with it some, but can't get it to work. Has anyone tried something similar with success? Any feed-back would be appreciated. Thanks in advance. _______________________________________________ K12OSN mailing list <a href="mailto:K12OSN@redhat.com">K12OSN@redhat.com</a> <a href="https://www.redhat.com/mailman/listinfo/k12osn"> https://www.redhat.com/mailman/listinfo/k12osn</a> For more info see <<a href="http://www.k12os.org">http://www.k12os.org</a>> </blockquote></div> While this doesn't actually answer your question, I'd recommend that you instead install freenx on your K12LTSP server, and then use NoMachine's ( <a href="http://www.nomachine.com">www.nomachine.com</a>) Windows client to connect from your Windows Vista PC. It's performance, even over an internal LAN, is much better than VNC. If you decide to try freenx, be sure to check out Rick Stout's web page about freenx for information on copying the keys into the client software. You should also then install NoMachine's Linux client on the K12LTSP server, too. <a href="http://fedoranews.org/contributors/rick_stout/freenx/">http://fedoranews.org/contributors/rick_stout/freenx/</a> David Whitmer Director of Media & Technology Calvary Schools of Holland (Michigan) web: <a href="http://www.calvaryschoolsholland.org">www.calvaryschoolsholland.org</a> personal email: <a href="mailto:thewhitmers@gmail.com">thewhitmers@gmail.com</a> school email: <a href="mailto:david.whitmer@cshk12.org">david.whitmer@cshk12.org</a>