Hi everybody!<br>I write from Argentina! so sorry for my bad english, I try to explain to clear as possible:<br><br>I have many thin clients of same type: "Compaq Deskpro Ex Microtower" (color white) - Celeron 566 - 64MB RAM - Motherboard Intel (I supose)<br>
<br>The trouble is that I do not have sound in the terminals.<br><br>The system: k12EL5.0 (the last).<br><br>The hardware of thin client (from the original service manual):<br>     <br>Chipset Component         Function<br>
810e    82810e-DC100 GMCH AGP 2X interface<br>                          Direct AGP graphics controller<br>                          SDRAM controller supporting up to 2 PC100 DIMMs<br>                          66-/100-/133-MHz FSB<br>
            82801AB ICH       PCI bus I/F<br>                          LPC bus I/F<br>                          SMBus I/F<br>                          IDE I/F with UATA/66 support<br>                          AC '97 controller<br>
                          RTC/CMOS<br>                          IRQ controller<br>                          Power management logic<br>                          USB I/F<br>                          8259 or I/O APIC interrupt processing<br>
           82802 FWH         Loaded with AMI BIOS<br>815     82815 GMCH        AGP 4X interface<br>                          Direct AGP graphics controller<br>                          SDRAM controller supporting up to 2 PC133 DIMMs<br>
                          66-/100-/133-MHz FSB<br>        82801AB ICH       Same as for 810e Chipset<br>        82802 FWH         Loaded with Compaq BIOS<br><br><br><br>I check if in the screen of terminal when boots, detect the sound card (onboard) and yes:<br>
i810: Intel ICH 82801AA found at IOx0d800 and 0xdc00, MEM 0x0000 and 0x0000 IRQ 11.<br><br>I check if listen the port 16001 and yes:<br>- accepting connections on port 16001<br><br>I check if the "-public" option is present in sound.rc and yes:<br>
export ESD_SPAWN_OPTIONS="-public"<br>               /bin/esd -nobeeps -tcp -port 16001 -as 1 -public &<br><br>My lts.conf file in part sound:<br># enable sound by default<br>        SOUND              = Y<br>
        # choose either esd or nasd to be the default (esd only on x86_64)<br>        SOUND_DAEMON       = "esd"<br>#        SOUND_DAEMON     = "nasd"<br>        #RCFILE_0x = sound.rc<br><br>        # default sound volume<br>
        VOLUME             = 75<br><br>        ### For ISA sound cards, you have to specify the module to use:<br>       # SMODULE_01       = "sb io=0x220 irq=5 dma=1"<br><br>In the grafic user in gnome, when I try to open the mixer I have a error tell me some that "gstreamer no encounter .. no device..", when I play a audio with xmms, hi tell me that the sund is blocked by other applicattion, when I try to autodetect the sound card from the client, this modifies the values of volume of my server, and I can see, I think, the soundcard of my server, that is a i810 too!<br>
In KDE just I have entered, tell me that the sound is no initialize because I have no premissions...<br><br>Please somebody can help me?<br>Thank you a lot!<br>Cheers from Argentina, sorry for mu bad english!<br>