<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN"> <HTML> <HEAD> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8"> <META NAME="GENERATOR" CONTENT="GtkHTML/3.16.3"> </HEAD> <BODY> I did some research on the Compaq D51 early on last month and found that the problem is x.org based. There is a bug in the i810 support, which has been reported and acknowledged, just not fixed as yet that I know. I would check the x.org site again though, they may have fixed it by now. You know that you can use a default vesa driver setting and get them working, just have to deal with limited tweaking on the screen resolution. I think I also ran into a problem with getting a blank screen when logging out of the thin client using the vesa driver. On Wed, 2009-02-04 at 15:58 -0500, John Baillie wrote: <BLOCKQUOTE TYPE=CITE> <PRE> Hello, We are still running K12LTSP release 4.2.1EL-1 2 Servers with about 100 concurrent users. This setup has served us well and has been hands off for three plus years. I plugged in the k12 live usb (pretty slick) and booted a few of the lab terminals with mixed results. We have a mixture of CRTs and LCDs and some of them will not display. The clients are all Compaq DS51 and DS5S We ran into the same problem when we demoed the latest ubuntu a few months back. I'm guessing that the newer x servers don't work well with the older hardware we have and it has nothing to do with a particular distribution. It's looking like we will have to dig in and make some manual adjustments to the display properties. I'm looking around /opt/ltsp/i386/etc/X11 but it is not obvious where I should make changes. John _______________________________________________ K12OSN mailing list <A HREF="mailto:K12OSN@redhat.com">K12OSN@redhat.com</A> <A HREF="https://www.redhat.com/mailman/listinfo/k12osn">https://www.redhat.com/mailman/listinfo/k12osn</A> For more info see <<A HREF="http://www.k12os.org">http://www.k12os.org</A>> </PRE> </BLOCKQUOTE> </BODY> </HTML>