<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"> </head> <body bgcolor="#ffffff" text="#000000"> Hi All, Im trying to setup LTSP using the InstallGuide and running into difficulties. I installed a fresh copy of CentOS 6 on a Dell precision T3400 in a mixed network environment with my dhcp server using port 1067. I cant get into the TC console at the moment for exact specs, but its a "red faced" jammin from disklessworkstations , manufactured june 2009, flashed to work over 1067. It works with my older versions of ltsp on centos 5.4. I , think, followed the directions on the wiki carefully, didnt run into any problems or receive any error messages. When the TC is booting it appears to be detected as etherboot-5.4 and attempts to load the elf.ltsp kernel. In messages, on the server, i see DHCPDISCOVER DHCPOFFER DHCPREQUEST DHCPACK all with sane values, dhcp looks ok the last line is xinetd : START tftpd pid="pidnumber" from ="ipaddy" on the TC , it shows the dhcp negotion and the last line is: Loading 10.10.0.58:/ltsp/i386/elf.ltsp (ELF) ... done there it stops. No further output on TC or client. I also tried forcing the wraplinux and pxe.0 kernels, which seem to get further. I get the scrolling bar at the bottom that says scientific linux 6.1 on the bottom right, but ultimately results in dracut error messages and a kernel panic. I hoping I missed something simple. Any pointers are appreciated. Thanks Steve </body> </html>