<html> <head> <meta content="text/html; charset=ISO-8859-1" http-equiv="Content-Type"> </head> <body bgcolor="#FFFFFF" text="#000000"> hello Jushua, thanks for letting me know. *the routing problem was solved by editing the iptables manualy. * I did put "em2" in /etc/ltsp/ltsp-server.conf before running the scripts. * my original install was with epel, yesterday evening I updated with the other repo: [root@centoshofkwartier ~]# yum repolist Loaded plugins: fastestmirror, refresh-packagekit, security Loading mirror speeds from cached hostfile * base: distrib-coffee.ipsl.jussieu.fr * extras: mirror.ovh.net * ltsp: ltsprepo.s3.amazonaws.com * updates: distrib-coffee.ipsl.jussieu.fr repo id repo name status base CentOS-6 - Base 6381 extras CentOS-6 - Extras 12 ltsp LTSP - x86_64 60 but something went wrong with the update,because my version is still: [root@centoshofkwartier ~]# rpm -qa | grep ltsp ltsp-server-5.4.5-20.el6.x86_64 ltspfs-1.1-7.el6.x86_64 ltsp-release-5-9.el6.noarch * I then rebuilded with ltsp-build-client but the problem with the green glare stays. Everything 's on the screen, but there's this filter over it...... Maybe this can be solved by editing lts.conf..... greetings, J <div class="moz-cite-prefix">Op 04-06-13 20:46, Joshua Trimm schreef: </div> <blockquote cite="mid:51AE35FF.3050006@enslaver.com" type="cite">Johan, I have 5.4.5-21 being pushed to the repo's today which should fix the scripts to accept an interface regardless of its name. The reason NFS needs to be started manually is due to the RPM not knowing which interface you will be using for the LTSP network. This must be defined in /etc/ltsp/ltsp-server.conf before ltsp-server-tweaks and ltsp-server-initialize are run. On 6/4/13 5:23 AM, Johan Vermeulen wrote: <blockquote type="cite">Dear All, this is my experience with the install : version is ltsp-server-5.4.5-20.el6.x86_64 on Centos6.4. installed with epel-repo. After starting nfs manualy like Barry and starting tftp manualy, I am able to boot a thinclient. But I'm facing these problems : *ltsp-server-tweaks hangs on " about to overwrite your firewall config" either with iptables on or off. Probably because of that, laptops and workstations that are on the lan cannot reach the internet. This is my main concern. Setting up nat manualy did not help. this is /etc/sysconfig/iptables : # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *nat :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth+ -j MASQUERADE -A POSTROUTING -o em2 -j MASQUERADE COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth+ -j ACCEPT -A INPUT -i em2 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT -A FORWARD -p icmp -j ACCEPT -A FORWARD -i lo -j ACCEPT -A FORWARD -i eth+ -j ACCEPT -A FORWARD -i em2 -j ACCEPT -A FORWARD -o eth+ -j ACCEPT -A FORWARD -o em2 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT *ltsp-server-initialize gives me a lot of EM. But the thinclient boots, so maybe that's not a problem. *when booting the thinclient, I get an EM : unsupported device : processor centaurhauls The thinclient is an HP hstnc-004 that I used on 3 different thinclient systems in the past 3 years. It would be a real problem if it doesn't work with this image. *when booted, I am able to log in, and adapt language and other settings in lts.conf. But I can't get rid of the green glare that is over the screen. Could be the Acer monitor, but it's fine when attached to other devices. Any input on these issues would be greatly appreciated. greetings, J. Op 03-06-13 20:20, Barry Cisna schreef: <blockquote type="cite">Hello All, Replying to my previous post. For completeness. The fix for the 'stuck' Booting Linux line was I did not have nfs service started at boot on the server and had to manually enter the /opt/ltsp dir in nfs/exports. After this clients will boot fine. Take Care, Barry _______________________________________________ K12OSN mailing list <a class="moz-txt-link-abbreviated" href="mailto:K12OSN@redhat.com">K12OSN@redhat.com</a> <a class="moz-txt-link-freetext" href="https://www.redhat.com/mailman/listinfo/k12osn">https://www.redhat.com/mailman/listinfo/k12osn</a> For more info see <a class="moz-txt-link-rfc2396E" href="http://www.k12os.org"><http://www.k12os.org></a> </blockquote> _______________________________________________ K12OSN mailing list <a class="moz-txt-link-abbreviated" href="mailto:K12OSN@redhat.com">K12OSN@redhat.com</a> <a class="moz-txt-link-freetext" href="https://www.redhat.com/mailman/listinfo/k12osn">https://www.redhat.com/mailman/listinfo/k12osn</a> For more info see <a class="moz-txt-link-rfc2396E" href="http://www.k12os.org"><http://www.k12os.org></a> </blockquote> _______________________________________________ K12OSN mailing list <a class="moz-txt-link-abbreviated" href="mailto:K12OSN@redhat.com">K12OSN@redhat.com</a> <a class="moz-txt-link-freetext" href="https://www.redhat.com/mailman/listinfo/k12osn">https://www.redhat.com/mailman/listinfo/k12osn</a> For more info see <a class="moz-txt-link-rfc2396E" href="http://www.k12os.org"><http://www.k12os.org></a> </blockquote> </body> </html>