[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
RE: Loading device firmware in kickstart
- From: "Caetano, Greg" <Greg Caetano hp com>
- To: "Discussion list about Kickstart" <kickstart-list redhat com>
- Subject: RE: Loading device firmware in kickstart
- Date: Tue, 26 Jun 2007 11:24:56 -0400
Matt:
>From the ipw2200 install document:
MAKE SURE THAT THE FOLLOWING CAPABILITIES ARE ENABLED:
~~~~~~~~~~~~~~~~~~~~~~~~~~~
#define CONFIG_FW_LOADER 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~
ipw2200 loads firmware via the Linux firmware hotplug capability (see
later
section on firmware loading). In 2.6.x, this is enabled via menuconfig:
Device Drivers ->
Generic Driver Options ->
Hotplug firmware loading support
Greg Caetano
HP TSG Linux Solutions Alliances Engineering
Chicago, IL
greg caetano hp com
Red Hat Certified Engineer
RHCE#803004972711193
-----Original Message-----
From: kickstart-list-bounces redhat com
[mailto:kickstart-list-bounces redhat com] On Behalf Of Matt Fahrner
Sent: Tuesday, June 26, 2007 9:58 AM
To: kickstart-list redhat com
Subject: Loading device firmware in kickstart
Hi all,
We've built a kickstart image (initrd.img) with custom modules to
support the Intel PRO/Wireless 2200BG wireless card (it uses the
"ipw2200" module). As we've had experience with this before, getting the
module itself to load wasn't too hard, however in order for the card to
work it needs to load a firmware image as well. We believe that part is
failing.
What I've tried to do is put the firmware files in the same spot under
the "initrd" image as on a normal multi-user system, namely
"/lib/firmware". However as best as we can tell this isn't working.
We are going to try "/etc/firmware" as well, however I thought someone
might have had some experience with this before, so I am trying this
list. Does someone have some advice here?
Any help would be appreciated.
Thanks,
- Matt
--
---------------------------------------------------------------------
Matt Fahrner 2 South Park St.
Chief Systems Architect Willis House
Burlington Coat Factory Warehouse Lebanon, N.H. 03766
Tel: (603) 448-4100 x5150 USA
Fax: (603) 443-6190 Matt Fahrner COAT COM
---------------------------------------------------------------------
_______________________________________________
Kickstart-list mailing list
Kickstart-list redhat com
https://www.redhat.com/mailman/listinfo/kickstart-list
[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]