RE: Kickstart via PXE/NFS

[<secroft micron com>]

For the second interface, try turning it off in the bios. I believe you're running into an enumeration problem with the onboard NIC's. Whether you have it plugged in or not, it is probably where the issue is.

 

 

---

From: kickstart-list-bounces redhat com [mailto:kickstart-list-bounces redhat com] On Behalf Of SSTinsley upsfreight com
Sent: Monday, May 14, 2007 1:39 PM
To: Discussion list about Kickstart
Cc: Discussion list about Kickstart; kickstart-list-bounces redhat com
Subject: RE: Kickstart via PXE/NFS

kickstart-list-bounces redhat com wrote on 
05/14/2007 02:48:04 PM:

> How many NIC's do you have in the box? 
 Are they all embedded, or 
> are there some on cards? 

2 NICs. Only one is active an plugged in to a 
switch. 

While it may be powerful, it seems 
to be way more complicated than should be required. 

If the server can find its initial IP via DHCP to load pxelinux and 
to load the kernel, why is it 
unable to 
complete the last step and locate the kickstart file? I have specified the 
ksdevice 
several different ways and none have 
been successful (ksdevice=eth0, =link, =bootip with ipappend, =eth1) 
and in all cases anaconda ends up unable to get the IP and 
prompts me for static network configuration. 
I 
enter the needed network information and provide the NFS information to reach 
the RH install image and 
the box is able to 
read the o/s image and start an interactive install. 

I have also dropped to command line (ctl-alt-f2) and verified that 
the nfs directory holding the KS file 
can be 
mounted. And I have verified it can be retrieved with http using wget. And still 
anaconda is 
unable to retrieve the file with 
either nfs or http. 


> 
  
> Kickstart is a very powerful and 
useful tool that we use globally to
> build over 1000 distributed systems 
each year from a centralized and
> managed location, and although it has 
bugs like any product, most 
> issues like you are having tend to be 
infrastructure or manufacturer related. 
> 
  
> From: 
kickstart-list-bounces redhat com [mailto:kickstart-list-
> 
bounces redhat com] On Behalf Of SSTinsley upsfreight com
> Sent: Monday, 
May 14, 2007 11:36 AM
> To: Discussion list about Kickstart
> Cc: 
Discussion list about Kickstart; kickstart-list-bounces redhat com
> 
Subject: Re: Kickstart via PXE/NFS

> 
> I made a change to pxe cfg file to have ks.cfg file read via http. 
> 
> It fails too. However, if I look in the anaconda log I see the 
> message getting ks.cfg 
> but then failed to transfer ks.cfg to 
fd. The snoop from the KS 
> server side shows the HTTP 
> retrieval 
of the KS config file. Is it really trying to use an fd 
> device, a 
floppy? These 
> Dell servers do not include floppys. 
> 
> 
Redhat sure has taken something that should be relatively easy and 
> made 
it a pain in the butt. 
>   
> 
> 
kickstart-list-bounces redhat com wrote on 05/14/2007 01:29:54 PM:
> 
> > if you page-up in vty3, can you see what your kernel command line 
is?
> > alternately if it makes it to shell in vty2, 'cat 
/proc/cmdline' - i
> > wonder if it's actually doing the ipappend 
stuff. you might need a
> > newer pxelinux.0 if not. also, instead of 
'ksdevice=bootif' you can do
> > 'ksdevice=link ip=dhcp'  ; the 
bootif argument is more useful if you
> > have 2 nics enabled/link-up 
and want to make sure it doesnt pxeboot
> > out one interface and then 
ks out the other.
> > 
> > -=Eric
> > 
> > 
_______________________________________________
> > Kickstart-list 
mailing list
> > Kickstart-list redhat com
> > 
https://www.redhat.com/mailman/listinfo/kickstart-list 
> NOTE: THIS DOCUMENT MAY CONTAIN CONFIDENTIAL AND NONPUBLIC 
> INFORMATION. IT IS INTENDED ONLY FOR THE USE OF THE INDIVIDUAL(S) 
OR
> ENTITY(IES) NAMED ABOVE, AND OTHERS SPECIFICALLY AUTHORIZED TO 
> RECEIVE IT. If you are not the intended recipient of this document, 
> you are notified that any review, dissemination, distribution or 
> copying of this communication is prohibited. If you have received 
> this communication in error, please notify me immediately by return 
> email, delete the electronic message and destroy any printed 
copies.
> Thank you for your 
cooperation._______________________________________________
> 
Kickstart-list mailing list
> Kickstart-list redhat com
> 
https://www.redhat.com/mailman/listinfo/kickstart-list

NOTE: THIS DOCUMENT MAY CONTAIN CONFIDENTIAL AND NONPUBLIC INFORMATION. IT IS INTENDED ONLY FOR THE USE OF THE INDIVIDUAL(S) OR ENTITY(IES) NAMED ABOVE, AND OTHERS SPECIFICALLY AUTHORIZED TO RECEIVE IT. If you are not the intended recipient of this document, you are notified that any review, dissemination, distribution or copying of this communication is prohibited. If you have received this communication in error, please notify me immediately by return email, delete the electronic message and destroy any printed copies. Thank you for your cooperation.