I had a similar issue. I had only one NIC
cabled to the switch. The initial DHCP request was successful but it would
fail on finding the ks.cfg file.
I ended up turning off all the NICs in the
bios and this helped.
From:
kickstart-list-bounces redhat com [mailto:kickstart-list-bounces redhat com] On Behalf Of secroft micron com
Sent: Monday, May 14, 2007 4:02 PM
To: kickstart-list redhat com
Cc:
kickstart-list-bounces redhat com
Subject: RE: Kickstart via PXE/NFS
For the second interface, try turning
it off in the bios. I believe you're running into an enumeration problem with
the onboard NIC's. Whether you have it plugged in or not, it is probably where
the issue is.
From:
kickstart-list-bounces redhat com [mailto:kickstart-list-bounces redhat com] On Behalf Of SSTinsley upsfreight com
Sent: Monday, May 14, 2007 1:39 PM
To: Discussion list about
Kickstart
Cc: Discussion list about
Kickstart; kickstart-list-bounces redhat com
Subject: RE: Kickstart via PXE/NFS
kickstart-list-bounces redhat com
wrote on 05/14/2007 02:48:04 PM:
> How many NIC's do you have in the box?
Are they all embedded, or
> are there some on cards?
2 NICs. Only
one is active an plugged in to a switch.
While it may
be powerful, it seems to be way more complicated than should be required.
If the
server can find its initial IP via DHCP to load pxelinux and to load the
kernel, why is it
unable to
complete the last step and locate the kickstart file? I have specified the
ksdevice
several
different ways and none have been successful (ksdevice=eth0, =link, =bootip
with ipappend, =eth1)
and in all
cases anaconda ends up unable to get the IP and prompts me for static network
configuration.
I enter the
needed network information and provide the NFS information to reach the RH
install image and
the box is
able to read the o/s image and start an interactive install.
I have also
dropped to command line (ctl-alt-f2) and verified that the nfs directory
holding the KS file
can be
mounted. And I have verified it can be retrieved with http using wget. And
still anaconda is
unable to
retrieve the file with either nfs or http.
>
>
Kickstart is a very powerful and useful tool that we use globally to
> build over 1000 distributed systems each year
from a centralized and
> managed location, and although it has bugs
like any product, most
> issues like you are having tend to be
infrastructure or manufacturer related.
>
> From:
kickstart-list-bounces redhat com [mailto:kickstart-list-
> bounces redhat com] On Behalf Of
SSTinsley upsfreight com
> Sent: Monday, May 14, 2007 11:36 AM
> To: Discussion list about Kickstart
> Cc: Discussion list about Kickstart;
kickstart-list-bounces redhat com
> Subject: Re: Kickstart via PXE/NFS
>
> I made a change to pxe cfg file to have
ks.cfg file read via http.
>
> It fails too. However, if I look in the
anaconda log I see the
> message getting ks.cfg
> but then failed to transfer ks.cfg to fd. The
snoop from the KS
> server side shows the HTTP
> retrieval of the KS config file. Is it really
trying to use an fd
> device, a floppy? These
> Dell servers do not include floppys.
>
> Redhat sure has taken something that should
be relatively easy and
> made it a pain in the butt.
>
>
> kickstart-list-bounces redhat com wrote on
05/14/2007 01:29:54 PM:
>
> > if you page-up in vty3, can you see what
your kernel command line is?
> > alternately if it makes it to shell in
vty2, 'cat /proc/cmdline' - i
> > wonder if it's actually doing the
ipappend stuff. you might need a
> > newer pxelinux.0 if not. also, instead
of 'ksdevice=bootif' you can do
> > 'ksdevice=link ip=dhcp' ; the
bootif argument is more useful if you
> > have 2 nics enabled/link-up and want to
make sure it doesnt pxeboot
> > out one interface and then ks out the
other.
> >
> > -=Eric
> >
> >
_______________________________________________
> > Kickstart-list mailing list
> > Kickstart-list redhat com
> >
https://www.redhat.com/mailman/listinfo/kickstart-list
> NOTE:
THIS DOCUMENT MAY CONTAIN CONFIDENTIAL AND NONPUBLIC
> INFORMATION. IT IS INTENDED ONLY FOR THE USE
OF THE INDIVIDUAL(S) OR
> ENTITY(IES) NAMED ABOVE, AND OTHERS
SPECIFICALLY AUTHORIZED TO
> RECEIVE IT. If you are not the intended
recipient of this document,
> you are notified that any review,
dissemination, distribution or
> copying of this communication is prohibited.
If you have received
> this communication in error, please notify me
immediately by return
> email, delete the electronic message and
destroy any printed copies.
> Thank you for your
cooperation._______________________________________________
> Kickstart-list mailing list
> Kickstart-list redhat com
>
https://www.redhat.com/mailman/listinfo/kickstart-list
NOTE: THIS DOCUMENT MAY CONTAIN CONFIDENTIAL AND NONPUBLIC INFORMATION.
IT IS INTENDED ONLY FOR THE USE OF THE INDIVIDUAL(S) OR ENTITY(IES) NAMED
ABOVE, AND OTHERS SPECIFICALLY AUTHORIZED TO RECEIVE IT. If you are not the
intended recipient of this document, you are notified that any review, dissemination,
distribution or copying of this communication is prohibited. If you have
received this communication in error, please notify me immediately by return
email, delete the electronic message and destroy any printed copies. Thank you
for your cooperation.