[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
RE: Unable to get any httprequests: Unable toretreive netstg2.imgfile
- From: SSTinsley upsfreight com
- To: amm lanl gov, Discussion list about Kickstart <kickstart-list redhat com>
- Cc:
- Subject: RE: Unable to get any httprequests: Unable toretreive netstg2.imgfile
- Date: Thu, 17 May 2007 13:31:57 -0400
kickstart-list-bounces redhat com wrote on 05/17/2007
01:22:21 PM:
> SSTinsley upsfreight com;
> Apologies if I've missed part of the thread, but
> does the hardware you are attempting to pxeboot/ks have more than
one
> nic?
> Sometimes you need to put --dev=eth(N) as the install kernel might
probe
> and set up the device in a different order than the bios...
>
> bios device 1 might show up as eth(N) to the installer...
>
> so you can get a ip via pxeboot, download installer, etc, but anaconda
> set's up eth0 as the other nic, so it times out...
> using --dev=eth(N) usually fixes this.
>
Yes these suggestions were made earlier and tried.
I disabled the second NIC in the
BIOS and still had the problems.
NOTE: THIS DOCUMENT MAY CONTAIN CONFIDENTIAL AND NONPUBLIC INFORMATION. IT IS INTENDED ONLY FOR THE USE OF THE INDIVIDUAL(S) OR ENTITY(IES) NAMED ABOVE, AND OTHERS SPECIFICALLY AUTHORIZED TO RECEIVE IT. If you are not the intended recipient of this document, you are notified that any review, dissemination, distribution or copying of this communication is prohibited. If you have received this communication in error, please notify me immediately by return email, delete the electronic message and destroy any printed copies. Thank you for your cooperation.
[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]