Greetings ... I have asked this before, but I might have worded it just a little wrong. I was hoping somebody could help me with doing a server install using kickstart file, which starts the system with a degraded raid. Basicly starting a server with only one hard drive, which will get the second drive once the server is ready to go into use. I currently use the following in my kickstart script ... Is there an option I don't know of or could use that I have missed ... bootloader --location=mbr --driveorder=sda,sdb clearpart --all --initlabel --drives=sda,sdb # /boot part raid.01 --size=256 --ondisk=sda --asprimary part raid.02 --size=256 --ondisk=sdb --asprimary # Dos part /mnt/dos-a --fstype="vfat" --size=256 --ondisk=sda --asprimary part /mnt/dos-b --fstype="vfat" --size=256 --ondisk=sdb --asprimary # Swap part swap --size=1024 --ondisk=sda --asprimary part swap --size=1024 --ondisk=sdb --asprimary # / part raid.11 --size=2048 --ondisk=sda part raid.12 --size=2048 --ondisk=sdb # /usr part raid.21 --size=4096 --ondisk=sda part raid.22 --size=4096 --ondisk=sdb # /var part raid.31 --size=2048 --ondisk=sda part raid.32 --size=2048 --ondisk=sdb # /home part raid.51 --size=256 --grow --ondisk=sda part raid.52 --size=256 --grow --ondisk=sdb #RAID raid /boot --fstype ext3 --level=RAID1 --device=md0 raid.01 raid.02 raid / --fstype ext3 --level=RAID1 --device=md1 raid.11 raid.12 raid /usr --fstype ext3 --level=RAID1 --device=md2 raid.21 raid.22 raid /var --fstype ext3 --level=RAID1 --device=md3 raid.31 raid.32 raid /home --fstype ext3 --level=RAID1 --device=md5 raid.51 raid.52 Thanks Mailed LeeT