Bootdata ok (command line is root=/dev/OS/RHEL5 ro) Linux version 2.6.18-numa.52.el5xen (veillard@test2) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Thu Sep 27 15:18:40 CEST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 00000000f301e000 (usable) On node 0 totalpages: 995358 DMA zone: 995358 pages, LIFO batch:31 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f7b00 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x00000000adf070e8 ACPI: FADT (v001 NVIDIA CK8S 0x06040000 PTL_ 0x000f4240) @ 0x00000000adf0cce6 ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x00000000adf0cd5a ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x00000000adf0cdaa ACPI: HPET (v001 PTLTD HPETTBL 0x06040000 LTP 0x00000001) @ 0x00000000adf0cdf6 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x00000000adf0ce2e ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x00000000adf0cec8 ACPI: SRAT (v001 AMD HAMMER 0x06040000 AMD 0x00000001) @ 0x00000000adf0cef0 ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xd0000000] gsi_base[24]) IOAPIC[1]: apic_id 5, version 17, address 0xd0000000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to xen Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at b0000000 (gap: ae000000:32000000) Built 1 zonelists. Total pages: 995358 Kernel command line: root=/dev/OS/RHEL5 ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 2814.460 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: 0xffff880005c86000 - 0xffff880009c86000 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 3817216k/3981432k available (2357k kernel code, 155508k reserved, 1326k data, 172k init) Calibrating delay using timer specific routine.. 7037.82 BogoMIPS (lpj=14075647) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 (SMP-)alternatives turned off ACPI: Core revision 20060707 Initializing CPU#1 Initializing CPU#2 Brought up 4 CPUs sizeof(vma)=168 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=216 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=96 bytes sizeof(skbuff)=240 bytes Initializing CPU#3 migration_cost=501 checking if image is initramfs... it is Grant table initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:06.0 Boot video device is 0000:05:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2.NECA._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LMA2] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11 ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *7 ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *5 ACPI: PCI Interrupt Link [LSI2] (IRQs 16 17 18 19 20 21 22 23) *10 ACPI: PCI Root Bridge [PCI1] (0000:80) PCI: Probing PCI hardware (bus 80) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR2._PRT] ACPI: PCI Interrupt Link [LK1E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled. ACPI: PCI Interrupt Link [LK2E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled. ACPI: PCI Interrupt Link [LK3E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled. ACPI: PCI Interrupt Link [LK4E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 40 41 42 43 44 45 46 47) *0, disabled. ACPI: PCI Interrupt Link [LMA2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled. ACPI: PCI Interrupt Link [LUS2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 40 41 42 43 44 45 46 47) *0, disabled. ACPI: PCI Interrupt Link [LPID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled. ACPI: PCI Interrupt Link [LSI1] (IRQs 40 41 42 43 44 45 46 47) *0, disabled. ACPI: PCI Interrupt Link [LSI2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 16 devices xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:03: ioport range 0x1000-0x107f could not be reserved pnp: 00:03: ioport range 0x1080-0x10ff has been reserved pnp: 00:03: ioport range 0x1400-0x147f has been reserved pnp: 00:03: ioport range 0x1480-0x14ff has been reserved pnp: 00:03: ioport range 0x1800-0x187f has been reserved pnp: 00:03: ioport range 0x1880-0x18ff has been reserved pnp: 00:03: ioport range 0x3440-0x347f has been reserved pnp: 00:03: ioport range 0x3400-0x343f has been reserved pnp: 00:0f: ioport range 0xf000-0xf07f has been reserved pnp: 00:0f: ioport range 0xf080-0xf0ff has been reserved pnp: 00:0f: ioport range 0xf400-0xf47f has been reserved pnp: 00:0f: ioport range 0xf480-0xf4ff has been reserved pnp: 00:0f: ioport range 0xf800-0xf87f has been reserved pnp: 00:0f: ioport range 0xf880-0xf8ff has been reserved PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: b0100000-b01fffff PREFETCH window: disabled. PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:00.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: b0200000-b02fffff PREFETCH window: disabled. PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:05:00.0 PCI: Bridge: 0000:00:0f.0 IO window: disabled. MEM window: b1000000-b2ffffff PREFETCH window: c0000000-cfffffff PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 23 GSI 16 sharing vector 0xA0 and IRQ 16 ACPI: PCI Interrupt 0000:02:00.1[A] -> Link [LK4E] -> GSI 23 (level, high) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.1 to 64 PCI: Setting latency timer of device 0000:00:0f.0 to 64 PCI: Bridge: 0000:80:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:80:0d.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) audit(1190986601.880:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 6162A2834A3D6D8 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0f.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0f.0:pcie00] PCI: Setting latency timer of device 0000:80:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:80:0d.0:pcie00] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as ttyS0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0 NFORCE-MCP55: chipset revision 161 NFORCE-MCP55: not 100% native mode: will probe irqs later NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller ide0: BM-DMA at 0x3480-0x3487, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: LITE-ON DVDRW LH-18A1P, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Write protecting the kernel read-only data: 445k input: AT Translated Set 2 keyboard as /class/input/input0 USB Universal Host Controller Interface driver v3.0 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 GSI 17 sharing vector 0xA8 and IRQ 17 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, high) -> IRQ 17 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 17, io mem 0xb0004000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21 GSI 18 sharing vector 0xB0 and IRQ 18 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 21 (level, high) -> IRQ 18 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 18, io mem 0xb0005000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected SCSI subsystem initialized libata version 2.21 loaded. sata_nv 0000:00:05.0: version 3.4 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20 GSI 19 sharing vector 0xB8 and IRQ 19 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LTID] -> GSI 20 (level, high) -> IRQ 19 PCI: Setting latency timer of device 0000:00:05.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0x00000000000134d0 ctl 0x00000000000134c6 bmdma 0x0000000000013490 irq 19 ata2: SATA max UDMA/133 cmd 0x00000000000134c8 ctl 0x00000000000134c2 bmdma 0x0000000000013498 irq 19 ohci_hcd 0000:00:02.0: wakeup ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: WDC WD1200JS-22MHB0, 02.01C03, max UDMA/133 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: configured for UDMA/133 usb 1-6: new low speed USB device using ohci_hcd and address 2 usb 1-6: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-6 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7: WDC WD3200YS-01PGB0, 21.00M21, max UDMA/133 ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/1) ata2.00: configured for UDMA/133 Vendor: ATA Model: WDC WD1200JS-22M Rev: 02.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 < sda5 sda6 sda7 sda8 > sda2 sda3 sd 0:0:0:0: Attached scsi disk sda Vendor: ATA Model: WDC WD3200YS-01P Rev: 21.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sd 1:0:0:0: Attached scsi disk sdb ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 19 GSI 20 sharing vector 0xC0 and IRQ 20 ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSI1] -> GSI 19 (level, high) -> IRQ 20 PCI: Setting latency timer of device 0000:00:05.1 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x00000000000134e8 ctl 0x00000000000134de bmdma 0x00000000000134a0 irq 20 ata4: SATA max UDMA/133 cmd 0x00000000000134e0 ctl 0x00000000000134da bmdma 0x00000000000134a8 irq 20 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 18 GSI 21 sharing vector 0xC8 and IRQ 21 ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSI2] -> GSI 18 (level, high) -> IRQ 21 PCI: Setting latency timer of device 0000:00:05.2 to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0x0000000000013800 ctl 0x00000000000134f6 bmdma 0x00000000000134b0 irq 21 ata6: SATA max UDMA/133 cmd 0x00000000000134f8 ctl 0x00000000000134f2 bmdma 0x00000000000134b8 irq 21 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 6 roles, 1658 types, 210 bools, 1 sens, 1024 cats security: 61 classes, 57664 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1190986610.688:2): policy loaded auid=4294967295 input: PC Speaker as /class/input/input2 shpchp: HPC vendor_id 1033 device_id 125 ss_vid 0 ss_did 0 shpchp: Can't get msi for the hotplug controller shpchp: Use INTx for the hotplug controller shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 8250_pnp: Unknown symbol serial8250_unregister_port 8250_pnp: Unknown symbol serial8250_register_port EDAC MC: Ver: 2.0.1 Sep 27 2007 hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2 EDAC MC1: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:19.2 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x3440 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x3400 i2c_adapter i2c-2: nForce2 SMBus adapter at 0x4440 i2c_adapter i2c-3: nForce2 SMBus adapter at 0x4400 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 17 GSI 22 sharing vector 0xD0 and IRQ 22 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 17 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:08.0 to 64 forcedeth: using HIGHDMA device_create does not work yet for NULL parents device_create does not work yet for NULL parents sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 eth0: forcedeth.c: subsystem: 010f1:2915 bound to 0000:00:08.0 ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 16 GSI 23 sharing vector 0xD8 and IRQ 23 ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 16 (level, high) -> IRQ 23 PCI: Setting latency timer of device 0000:00:06.1 to 64 hda_codec: Unknown model for ALC262, trying auto-probe from BIOS... device_create does not work yet for NULL parents device_create does not work yet for NULL parents device_create does not work yet for NULL parents device_create does not work yet for NULL parents ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMA2] -> GSI 23 (level, high) -> IRQ 16 PCI: Setting latency timer of device 0000:00:09.0 to 64 forcedeth: using HIGHDMA eth1: forcedeth.c: subsystem: 010f1:2915 bound to 0000:00:09.0 lp: driver loaded but no devices found ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded loop: loaded (max 8 devices) EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda6, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-2, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-5, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-1, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on dm-6, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-6, type ext3), uses xattr SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.1 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts eth0: no IPv6 routers present Bridge firewalling registered virbr0: no IPv6 routers present device vif0.0 entered promiscuous mode xenbr0: port 1(vif0.0) entering learning state xenbr0: topology change detected, propagating xenbr0: port 1(vif0.0) entering forwarding state device peth0 entered promiscuous mode xenbr0: port 2(peth0) entering learning state xenbr0: topology change detected, propagating xenbr0: port 2(peth0) entering forwarding state eth0: no IPv6 routers present