<html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> </head> <body text="#000000" bgcolor="#FFFFFF"> Brilliant! Thanks Laine. I really appreciate the help. <blockquote type="cite">you could also avoid setting up the bridge and just use macvtap bridge mode as you say you've done on your own network. The only limitation of that is that it doesn't permit direct communication between the host and the guests. If that limitation is okay with you, then that's fine.</blockquote> How does the performance of a bridge on the host (Ubuntu bridge-utils) typically compare to a macvtap bridge? Is there an expected performance advantage of one over the other? I was hoping for better performance out of the macvtap bridge. Time to buy some extra IPs it seems... Most appreciated Laine. <div class="moz-signature"> <meta http-equiv="content-type" content="text/html; charset=UTF-8"> <title></title> Paul O'Rorke Tracker Software Products (Canada) Limited <a href="http://www.tracker-software.com/">www.tracker-software.com</a> Tel: +1 (250) 324 1621 Fax: +1 (250) 324 1623 <a href="http://www.tracker-software.com/"> <img src="https://www.tracker-software.com/fckfiles/image/images/resellers/logo/TrackerSofwareProducts_Logo_330x100.png" name="image.png" width="198" height="60" border="0" align="bottom"> </a> Support: <a href="http://www.tracker-software.com/support">http://www.tracker-software.com/support </a> Download latest Releases <a href="http://www.tracker-software.com/downloads/">http://www.tracker-software.com/downloads/</a> </div> <div class="moz-cite-prefix">On 2019-10-23 9:44 a.m., Laine Stump wrote: </div> <blockquote type="cite" cite="mid:ab94799d-c95e-049f-db41-f2c6bc0312e9@redhat.com">On 10/23/19 12:43 AM, Paul O'Rorke wrote: <blockquote type="cite">Hi list, Can anyone advise me on the correct/best set up for Virtual Server Hosting? I have a guest in my server room wish to migrate to dedicated server I rented in an offsite in a data centre. I rented a box with one NIC and one public IP. I installed KVM on it and a guest. (both Ubuntu 18.04 LTS server edition). I am struggling to get the networking right. Essentially I want the "Virtual Server Hosting" config mentioned here: <a class="moz-txt-link-freetext" href="https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html-single/virtualization_administration_guide/index#sub-sect-routed-mode">https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html-single/virtualization_administration_guide/index#sub-sect-routed-mode</a> <a class="moz-txt-link-rfc2396E" href="https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html-single/virtualization_administration_guide/index#sect-attch-nic-physdev"><https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html-single/virtualization_administration_guide/index#sect-attch-nic-physdev></a> I have not had any luck setting that up. It is listed in the "Routed" section but the graphic says the virtual switch should be in bridged mode. I also tried using macvtap, and since I have only one guest was expecting to be able to just use the host IP </blockquote> No, you will need one IP for the host, and one IP for the guest in either bridged mode or for macvtap. <blockquote type="cite">but it looks like the data centre have restricted packets to the MAC address of the host NIC. </blockquote> Yes, there is that restriction too. Usually hosting providers will lock down the MAC addresses they allow through ports, in order to prevent hostile clients from doing MAC spoofing to capture other clients' traffice. When <blockquote type="cite">set up I can ping the public IP (it is both eh host and the guest?) </blockquote> No. An IP address refers to one entity. It can be the host or the guest, but not both. but <blockquote type="cite">not their gateway. Should a macvtap not be presenting the MAC address of the host NIC to the router and thus allowing packets from the guest? </blockquote> No, that is not what macvtap does. It creates a virtual NIC (macvtap device) that is connected directly to the physical NIC, and traffic from that device is injected directly into the output queue of the physical device, MAC address and all. <blockquote type="cite"> I clearly have a lack of understanding of how this is working and how it is meant to work. When I tried the same thing on mt hardware/network I can create myltiple guests that all use the macvtap interface and I have no problems getting connectivity to the outside world. </blockquote> Because on your own network you have no MAC address locking on your switch port, and have multiple IP addresses available (one for each guest) from the local DHCP server. <blockquote type="cite"> Before I approach the data centre about this I want to be sure I understand what I am doing. I ultimately want to host a mail server and several different web servers as guests all behind this one host. I would alias their public IPs to the host NIC and use IPtables to route traffic based on destination IP. </blockquote> The only reason you would want iptables to be involved is if you were limited to only 1 IP address for the host + all the guests. In that case you could use *port* forwarding to cause incoming traffic to the host on particular TCP ports to be forwarded to different guests: <a class="moz-txt-link-freetext" href="https://wiki.libvirt.org/page/Networking#Forwarding_Incoming_Connections">https://wiki.libvirt.org/page/Networking#Forwarding_Incoming_Connections</a> <blockquote type="cite"> Does that make sense? Can anyone suggest the right way to achieve this? </blockquote> No, not really :-) If you can only get a single IP address, then you'll need to look at the above link. If you can get the hosting provider to sell you extra IP addresses / MAC addresses (usually extra IPs cost money but MAC addresses are free, they just want to know what they are - you will need one *of each* for each guest), then you should put a bridge on your host's ethernet, and connect all the guests to that bridge, configuring each with its unique IP address / MAC address / default route info given to you by the hosting provider. You can use this as a reference to configure the host and guests: <a class="moz-txt-link-freetext" href="https://wiki.libvirt.org/page/Networking#Debian.2FUbuntu_Bridging">https://wiki.libvirt.org/page/Networking#Debian.2FUbuntu_Bridging</a> (you could also avoid setting up the bridge and just use macvtap bridge mode as you say you've done on your own network. The only limitation of that is that it doesn't permit direct communication between the host and the guests. If that limitation is okay with you, then that's fine.) </blockquote> </body> </html>