Hello! I have change to 10 and also to 20. Nothing change (still the same pb) Best regards! Catalin LUPESCU VoIP & Signalling Support Bull, Architect of an Open World TM Tél : 01.30.80.75.43 http://www.bull.com <table width=100%> <tr valign=top> <td> <td>James Parsons <jparsons@redhat.com> Envoyé par : linux-cluster-bounces@redhat.com 12/07/2007 17:02 Veuillez répondre à linux clustering <td> Pour : linux clustering <linux-cluster@redhat.com> cc : Objet : Re: [Linux-cluster] Problem with fenced on cluster with 2 BladeCenter machines: 1st machine is remove physically. The remaining one does not became Active (waiting for fenced)</table> catalin.lupescu@bull.net wrote: > > Hello! > > I have a Cluster Redhat made with 2 nodes IBM blades on Blade Center > chassis. > (fenced version 1.32.6) > > I have done the following test: > I have removed physically the node 1 machine (the Active one). > The second one is never became active one. "Clustat" command does not > printing any information. > In /var/log/messages we can found the following messages (repeated): > > Jul 11 17:46:24 cdrc1-2 fenced[4214]: fencing node "cdrc1-1" > Jul 11 17:46:38 cdrc1-2 fenced[4214]: agent "fence_bladecenter" > reports: pattern match timed-out at /sbin/fence_bladecenter line 185 > Jul 11 17:46:38 cdrc1-2 fenced[4214]: fence "cdrc1-1" failed > > If the node 1 is plugged, the node 2 became Active (fenced OK) > bz#240509 changed the sleep timeout in the bladecenter agent from 5 to 10...this is on or about line 193 in /sbin/fence_bladecenter. See what yours is set at, and try pushing it out a bit. This minor change is making its way through the distribution chain now. -j -- Linux-cluster mailing list Linux-cluster@redhat.com https://www.redhat.com/mailman/listinfo/linux-cluster